MGA Commodies GEOME-24 User manual

BEFOREYOUBEGIN
1. Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences.
2. Follow the sections that pertain to your particular installation. This will help you avoid costly mistakes.
3. To avoid property and products be damaged during installation,anchors must be inserted before installing the fasteners.
4.
5.
GEOME
INSTALLATIONINSTRUCTIONS
PRODUCT DESCRIPTION & INFORMATION
Tools will need:
MIRROR
GEOME-24"/ GEOME-30"/ GEOME-36"
Drill Safety Glasses
Tape Measure Pencil Level
Plus:
Fasteners
Expansion Plug
Assorted Drill Bits
Remark: The dimension drawing marked on installation instruction are regular，
INCH
DIMENSION DRAWING
Reference Value
GEOME-860M
MIRROR 1500×35×750MM
GEOME
MIRROR
23.6×1.4×29.5 INCH
29.5×1.4×29.5 INCH
35.4×1.4×29.5 INCH
Remark: The dimension drawing marked on installation instruction are regular，
－1－
23.6"
29.5"
29.5"
29.5"
35.4"
29.5“
To All information in these instruction is basic upon the latest product information available at the time of publication.
To turn off the power. In your electrical circuit breaker control for the room where you'll be working and switch the circuit off.
This installation covers the following products in the GEO Mirror range: GEOME-24"/GEOME-30"/GEOME-36" Mirror
Product Features:
•Frameless LED crystal clear wall mirror
• Option vertical or horizontal hanging
• Touch switch on & off
• Operates on 110V AC power , 50-60 HZ
• Energy saving 6500K LED Bulb (50,000 hours)
• UL approved components and cord attached to the back of mirror
• Other informastion:7-15W, 655 lumens, CRI 80

4. Hang the mirror on the wall carefully and in position to make the pre-installed
hangers at the back of the mirror are centered on the mountered hangers on
the wall. The hangers must interlock.
Screw
Hanger
Expansion Plug
Commodity:Decorative mirror with LED
Main material:5mm silver coated mirror+aluminum
Other info:110V AC, 50/60Hz, LED 7-15W, screen touch switch
Touch Switch
ON & OFF

-3-
Mirror installation
Warn!Risk of product damage.
ventilation.
CARE AND MAINTENANCE
LIMITED WARRANTY
Instead, apply the cleaner to a soft cloth and then wipe the
mirror.
5. Always use soft, grit-free cloths when cleaning a mirror to
reduce chances of scratching the surface.
1.Many cleansers contain abrasive and chemical substance
which is not suitable for cleaning stainless steel,enamel,
plating or plastic products.You may use mild cleansers or
soaps to clean the surfaces.Wipe any splashes of cleaner
solutions from the surface with clean soft cloth.
3. The best and safest cleaner for a mirror is clean, warm
water used with a soft cloth. Be careful not to allow the
edges of the mirror to get or remain wet over a period of
time.
6. Be sure to dry all joints and edges thoroughly to be
certain that no commercial cleaner comes in contact with
the edges an backing.
4. If using a commercial glass or mirror cleaner, be sure to use
a standard brand of glass or mirror cleaner that does not
contain ammonia or vinegar. Do not use Windex. Never
spray any cleaner directly on to a mirror.
This warranty is void in the event the product is damaged in transit, or if damage or failure is caused by abuse, misuse, storage of products in an
improper environment, abnormal usage, faulty installation, failure to follow installation instructions, damage in an accident, improper maintenance,
or any repair.
MGA Commodies Inc. reserves the right to inspect any claim prior to issuing credit.
2.Maintain ventilation in the bathroom,and separate the dry
area from the damp one if conditions permit.Try to open
the door and windows of the bathroom and maintain good
If a product is determined to be defective due to manufacturer's defects, we will supply a replacement product. The scope of the warranty is
limited to replacing the product and does not include labor to install, repair, deliver, or to remove the existing illuminated mirror.
5. Make the electrical connections while first ensuring that the electrical supply has been turned off.
It should be installed in accordance with the latest IEE regulations.
Please note: 3 wires in the plug on the back of the mirror: yellow and green (earth), blue (neutral) and red (live).
We warranty our products against manufacturer's defects for one year from the purchase date. The warranty applies only to the original purchaser
of the product from MGA Commodities Inc.