Pierenkemper BioBalance User manual

Item no. 462214
Operating Manual
Item no. 451600-0423

2
Table of Contents
Intended Use...................................................................................................................................3
Safety Instructions.........................................................................................................................3
Technical Information ...................................................................................................................4
Discription of Symbols..................................................................................................................4
Technical Data..............................................................................................................................5
Delivery Content ............................................................................................................................6
Accessories....................................................................................................................................6
Combination with Original Accessories .......................................................................................6
Control Unit Functions (front panel) ...........................................................................................7
Control Unit Functions (rear panel).............................................................................................8
BioBalance Waveform...................................................................................................................9
Power Mode................................................................................................................................. 10
Charging the Battery / Battery Operation.................................................................................. 10
Operation on Mains Circuit........................................................................................................ 10
Operating the BioBalance.......................................................................................................... 11
Switching the Device ON .......................................................................................................... 11
Connecting the Applicators....................................................................................................... 11
Home Menu Navigation............................................................................................................. 11
Selecting a Program.................................................................................................................. 12
Starting/Pausing/Stopping a Program ...................................................................................... 13
Audio Feedback ........................................................................................................................ 13
Other Menu Options ................................................................................................................... 14
Setting the Language................................................................................................................ 15
Software Update........................................................................................................................ 15
“About“ Menu............................................................................................................................. 15
BioBalance Programs ................................................................................................................ 16
General Information.................................................................................................................... 17
Adjustments, Modifications, and Repairs.................................................................................. 17
Classification ............................................................................................................................. 17
Battery Retraction and Disposal ............................................................................................... 17
Warranty and Guarantee........................................................................................................... 18
Maintenance and Cleaning ....................................................................................................... 18
Technical Check........................................................................................................................ 18

3
Intended Use
The BioBalance is a Pulsed Electromagnetic Field (PEMF) Therapy device. It has been
designed to generate a specific frequency signal for the applicator, which introduces a magnetic
field into the body. It is intended to be used as a health and wellness device.
Safety Instructions
Please read the operating instructions carefully before using the BioBalance.
To ensure safe use of the BioBalance:
•Do not use the BioBalance if it is not working properly or if it has been damaged in any
way.
•The USB connector serves exclusively for software updates. Do not connect any device
or cord other than a USB flash drive with software update to the USB connector of the
BioBalance device. Do not try to charge an external appliance with the USB connector.
•Only use the BioBalance with original accessories.
•Keep the BioBalance away from water or other liquids. Do not drop the BioBalance, use
it inappropriately, or expose it to extreme temperatures or high levels of humidity (not
less than 10° C/50° F or more than 40° C/100° F or a relative humidity greater than 90%)
•To avoid reciprocal interference, the BioBalance should not be operated in the vicinity of
other electronic devices. If this is not possible, various unit functions should be closely
monitored during operation so that proper use in accordance with the regulations is
ensured.
Attention / Contraindications
Do not use the BioBalance when you have implanted electrical devices including pacemakers,
cochlear implants, intrathecal pumps, etc. PEMFs have not been proven safe for pregnant
women. People with overactive adrenal or thyroid glands should use PEMFs with caution, as
glands can become over-stimulated and fatigued. Conditions with active bleeding should be
controlled before PEMFs are applied. Users known to be especially vulnerable to cardiac
rhythm disturbances should exercise caution when using high-intensity PEMFs near the heart.

4
Technical Information
Description of the symbols
Manufacturer
Attention: Read accompanying documents, especially user manual!
Class III device
Date of manufacture
Catalogue number
Serial number
Do not dispose of the appliance with the normal household waste at the end of
its life, but hand it in at an official collection point for recycling. By doing this
you will help to protect the environment.
By labelling with CE mark, the manufacturer asserts that the product fulfils all
relevant requirements of the respective EC Directives. A conformation
assessment process has been successfully completed.
Stand by
Battery check
Polarity of DC power connector
USB connector
Output

5
Technical Data
Operating voltage
External mains adapter SNT 15-2000
100-240 VAC / 50 - 60 Hz / 700 mA
Max. current consumption on 110 VAC
ca. 49 mA
Max. current consumption on 230 VAC
ca. 34 mA
Internal lithium-ion battery
10.8 V / 2200 mAh
Charging time
5 h
Output
Maximum Output voltage with RL= 220 
20V peak-to-peak (+/- 4 V)
Maximum magnetic field Mat-S
10 Gauss
Maximum magnetic field Mat-L
5 Gauss
Program parameters
Therapy duration
10 min –12 h
Basic frequency
300, 400, 600, 800 and 1000 Hz
Low frequency modulation
0.5 - 1000 Hz (+/- 1 %)
Contact control
Contact control turns on at:
≥ 20 % of maximum intensity
Size and weight
Size (H x B x D):
6.5 x 22 x 17 cm
Weight (without accessories):
830 g
Working conditions
Temperature range:
10-40 °C
Relative humidity:
30-70 %
Storing conditions
Temperature range:
-10-55 °C
Relative humidity:
10-90 %

6
Delivery Content
Item no. Description Quantity
462214 BioBalance 1
462147 Mains Adapter SNT 15-2000 1
462283 Small magnetic field applicator BioBalance-Mat-S 1
462284 Full body magnetic field applicator BioBalance-Mat-L 1
451600-0423 Operating manual 1
Accessories
The BioBalance may only be used together with the accessories referred to in this chapter. The
manufacturer cannot guarantee the safety of the BioBalance if it is not used with original
accessories.
Mains Adapter and Cables
Item no. Description Quantity
462147 Mains Adapter SNT 15-2000US 1
462283 Small magnetic field applicator BioBalance-Mat-S 1
462284 Full body magnetic field applicator BioBalance-Mat-L 1
Combination with Original Accessories
The BioBalance is a CE marked device and may therefore only be used together with the
accessories listed in the chapter Accessories of this manual. The manufacturer and dealer
cannot guarantee the security of the device if not used with original accessories. Use of non-
original accessories may void the warranty.

7
Control Unit Functions (Front Panel)
An explanation of key functions is also noted on the bottom of the display screen.
LED light for charging mode.
LED light for main circuit mode
ON/OFF Key
Key to select menu and
increase time setting
Key to select menu and
decrease time setting
Key to increase intensity
Key to decrease intensity
Confirmation Key
Start/Pause Key
Back Key
Audio feedback on/off key

8
Control Unit Functions (Rear Panel)
*The switch from battery operation to mains operation is automatic if the mains
adapter is connected. The unit will not run on battery power if the mains adapter is
connected. The unit cannot be charged while in operation.
Applicator sockets
USB socket
(for software updates only)
Socket for
mains adapter
Indicates operating
mode
Indicates charging
mode
Switch (only has
function when mains
adapter is plugged in)

9
BioBalance Waveform
The BioBalance signal is made up of two separate waveforms: the Basic Signal and the User
Signal. The Basic Signal is present in 3 of the 6 programs and cannot be adjusted. The User
Signal varies from program to program and is what the user selects. User Signal frequencies
change based on the chosen program. These two signals are layered together to create a
unique stimulation pattern.
Basic signal
The basic signal waveform is a modulated signal with the frequencies of 300, 400, 600, 800 and
1000 Hz.
User Signal
The low frequency form has a range from 0.5Hz to 1000 Hz, depending on chosen program.
Output signal
The output signal is a modulated signal from the basic signal and the low frequency signal.

10
Power Mode
You can use the device directly with the main adapter or with the rechargeable battery in the
device. The current power mode is shown in the upper right corner of the display.
The device is operating on mains circuit.
The device is operating on battery.
Charging the Battery / Battery Operation
If you wish to use the BioBalance on battery, you first need to charge it.
Connect the mains adapter to the socket at the rear side of the device. Turn the power switch to
the position “charging battery” . Connect the mains adapter to your mains circuit outlet.
The left LED on the upper side of the control box will illuminate red while the device is charging.
The LED will illuminate green once the battery is fully charged. The device cannot be used
while charging. Once the device is fully charged, disconnect the mains adapter from the mains
circuit and from the device and store it in the transportation case. Turn the power switch back to
the power mode .
The battery level is indicated on the upper right side of the display with the symbol. The
battery needs to be recharged once the battery symbol doesn’t have any bars .
Please note: The device is automatically in battery operation if the mains adapter is not
connected to the device.
Important! Please handle the mains adapter with care and do not drop it.
Operation on Mains Circuit
Connect the mains adapter to the socket at the rear side of the device. Turn the power switch to
the position “power mode” . Connect the mains adapter to your mains circuit outlet. The LED
on the right upper side of the case will illuminate green and the plug symbol in the top right
corner of the display screen indicate that the device is operating on mains circuit.
*Please note: The battery is not recharged during mains circuit operation.
Important! If you turn the switch to the “battery mode” position while the device is connected to
the mains circuit, the device will automatically turn OFF and will not be available for stimulation
purpose. The device automatically switches from battery operation to mains circuit operation if a
mains adapter is connected to the device.

11
Operating the BioBalance
Switching the device ON
Press the key to switch the device ON. The device is ready after approximately 13 seconds.
Connecting the magnetic field applicators
Connect the cable of the desired magnetic field applicator to the correct socket on the rear
panel of the BioBalance. Either of the two sockets may be used for either of the two applicators.
The symbol appears in the top right corner of the display when an applicator is connected.
You may connect one or both applicators. If both are connected, both will become active.
“Home”Menu Navigation
Home Menu / Choice of Menu
Three different menus can be selected:
Programs, Settings (language, software update), and About
To select the desired menu:
Use the keys on the left until you select the desired menu.
Confirm your selection by pressing the key.
Mat conneted
Menu
Explanation of
the keys
Power mode

12
Selecting a Program
Select the option “Programs” with the left keys in the “Home” menu. Confirm your
choice with the key. A list of programs is proposed. Press the key to return to the
“Home Menu”.
Use the keys on the left until you select the desired program.
Confirm your selection by pressing the key.
Once you confirm the program with the key, the screen will display program information.
Each program will default to a set time and intensity. You can adjust these parameters easily.
Use the keys on the left to adjust the treatment time. Use the keys on the
right to adjust the intensity. The intensity is shown as a percentage of the maximum intensity.
Intensity Level
Program
Description
Treatment
Time
Program
Name

13
Starting a Program
Once you have selected the desired program and adjusted the treatment time and intensity level
accordingly, press the key to start the stimulation. You will hear one single beep.
While the program is running, you will see an animation on the display screen. The treatment
time clock will count backwards.
You have the option to adjust the intensity level during an active treatment. To adjust the
intensity, use the keys on the right. When a programs has ended you will hear three
beeps.
Pausing a Program
To pause the treatment, press the key. Press the key again to resume the treatment.
You will hear two beeps.
Stopping a Program
To stop the treatment, press the key. You will hear three beeps.
Audio Feedback
The audio feedback sounds as stated above when a program ends, is paused, or is stopped.
You can turn the audio function off at any time by pressing the key. When the audio
function is switched OFF, the symbol shows in the upper right corner of the display screen.
Treatment
time counts
down
Animation

14
Other Menu Options
“Settings” Menu Navigation
Use the keys on the left until you select the “Settings” menu.
Confirm your selection by pressing the key.
Use the keys on the left until you select the desired option.
Confirm your selection by pressing the key.

15
Setting the Language
The BioBalance defaults to the English Language. To change the language into German or
Dutch, use the keys on the left. Confirm your selection by pressing the key. Press
the key to return to the “Settings” menu without changing the language.
Software Update
In the main “Settings” menu, use the keys on the left to select the “Software update”
option and confirm by pressing the key.
Copy all files of the software update to the main directory on an unpartitioned USB flash drive.
The USB must be formatted with FAT32. Plug the USB flash drive with the copied files into the
USB socket on the rear panel of the control unit. Wait until the device has detected the flash
drive, then press the key to start the software update. The files will automatically be copied
and installed. The device automatically restarts. Pull out the flash drive after the successful
software update.
Important note! Do not connect any other device than a USB flash drive to the USB connector
of the BioBalance device. Do not try to charge an external appliance with the USB connector.
The battery of the BioBalance cannot be recharged via the USB connector.
“About” Menu Navigation
The “About” menu shows you information about the BioBalance device, and shows you the
currently installed version of the software. From the “Home” menu, use the keys on
the left to select the “About” option and confirm by pressing the key. Press the key to
return to the “Home” menu.

16
BioBalance Programs
Each of the 6 BioBalance programs will default to a certain time and intensity level. Most of
these can be adjusted manually. Some of the programs contain both the basic signal and the
user signal, and some only contain the user signal.
(See “BioBalance Waveform” for more information.)
Program Settings
Balance
Basic Signal: 300, 600, 800, 1000 Hz
User Signal Frequencies: 7.8 Hz
Default Treatment Time: 15 minutes
Alert
Basic Signal: 300, 600, 800, 1000 Hz
User Signal Frequencies: 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 Hz
Default Treatment Time: 15 minutes
*User signal frequencies will spread out evenly over the course of the chosen treatment time.
Relax
Basic Signal: 300, 600, 800, 1000 Hz
User Signal Frequencies: 13, 12, 11, 10, 9, 8, 7, 6, 5, 4 Hz
Default Treatment Time: 15 minutes
*User signal frequencies will spread out evenly over the course of the chosen treatment time.
Sleep
Basic Signal? No
User Signal Frequencies: 3.5, 3, 2, 1, 0.5 Hz
Default Treatment Time: 30 minutes
*User signal frequencies will spread out evenly over the course of the chosen treatment time.
Recovery
Basic Signal? No
User Signal Frequencies: 10 Hz
Default Treatment Time: 15 minutes
Sweep
Basic Signal? No
User Signal Frequencies: 1 Hz to 1,000 Hz in 0.5 Hz increments
Default Treatment Time: 15 minutes fixed
*treatment time cannot be adjusted on the Sweep program

17
General Information
Adjustments, Modifications and Repairs
The manufacturer is only responsible for the safety and performance of the BioBalance when
readjustments, alterations and repairs are carried out by authorized persons and when the
BioBalance is used in accordance with the operating instructions.
Classification
The BioBalance is classified as a class III device. NSR 2014/35/EU
Battery Retraction and Disposal
In connection with the sales of products which contain batteries or rechargeable batteries, we
are obliged by law (German battery law § 18, section 1) to advise you of the following:
The dustbin symbol ( ) marks batteries with hazardous substances as well as the
circumstance that batteries must not be disposed of in the household waste but professionally.
The chemical term of the hazardous substance is below the dustbin symbol.
You are obliged by law to return used batteries.
You may render used batteries at municipal collecting points or in local trade. We are also
obliged to take back used batteries, whereat our obligation restricts to those which are or were
part of our product range.
Therefore, you may send back used batteries to us adequately stamped by mail or render these
at our warehouse free of charge at the following address:
Pierenkemper GmbH, Dreieiche 7, 35630 Ehringshausen, Germany
Please refer to the following figures to see the respective symbols of batteries with hazardous
substances:
Battery contains more than 0.002 % cadmium
Battery contains more than 0.0005 % quicksilver
Battery contains more than 0.004 % plumb

18
Warranty and Guarantee
Legal right of warranty is applied according to German Civil Code.
The manufacturer issues a guarantee of 24 months on the control unit and 12 months for the
applicators and power adapter, beginning on the date of purchase.
The guarantee does not apply in the following cases:
▪Damage due to improper handling
▪Defects the customer is aware of on the date of purchase
▪Damage caused by the customer
▪For wearing parts and consumable supplies including any battery, cables and electrodes.
Maintenance and Cleaning
No special cleaning or care agents are required for the BioBalance. Clean the stimulator, the
cables and the mains adapter with a soft, lint-free cloth. Please ensure that no moisture
permeates the stimulator. If moisture does permeate the stimulator, a technical check must be
carried out before re-use.
Technical Check
We recommend a technical check on the BioBalance every 24 months. This includes:
1. Confirming that user instructions have been included in the accompanying documentation.
2. Checking the equipment for completeness.
3. Visual check:
- The type plate, the adhesive label and the inscriptions are complete and readable
- For mechanical damage
- For damage to all cables, mains adapter, plugs and sockets
4. Functional Safety
- Checking the output signals with a load resistance of 220 Ω real current and voltage
- Checking the frequency
5. Measurement after EN 62353:2008
- Equipment leakage current
- Applied part leakage current
These technical checks may only be performed by suitably qualified persons. The results must
be documented with the date and name of the person carrying out the check.

19
Manufacturer:
Pierenkemper GmbH
Am Geiersberg 6
35630 Ehringshausen
Deutschland
www.pierenkemper.eu
Operating manual
REF 41600-0423:
Version 20161020