MGA Entertainment little tikes Go & Grow Unicorn User manual

Go & Grow™ Unicorn
Go & Grow™ Unicorn
SKU: 659324C3 ADULT ASSEMBLY AND SUPERVISION REQUIRED
AGES 1-3 YEARS
CONTENTS
Illustrations are for reference only. Styles may vary from actual contents.
Please remove all packaging including tags, ties & tacking stitches before giving this product to a child.
LIMITED WARRANTY
The Little Tikes Company makes fun, high quality toys. We warrant to the original purchaser that this product is
free of defects in materials or workmanship for one year * from the date of purchase (dated sales receipt is
required for proof of purchase). At the sole election of The Little Tikes Company, the only remedies available under
this warranty will be the replacement of the defective part or replacement of the product. This warranty is valid
only if the product has been assembled and maintained per the instructions. This warranty does not cover abuse,
accident, cosmetic issues such as fading or scratches from normal wear, or any other cause not arising from
defects in material and workmanship. *The warranty period is three (3) months for daycare or commercial
purchasers.
U.S.A and Canada: For warranty service or replacement part information, please visit our website at
www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little Tikes Company, 2180 Barlow
Road, Hudson OH 44236, U.S.A. Some replacement parts may be available for purchase after warranty
expires—contact us for details.
Outside U.S.A and Canada: Contact place of purchase for warranty service. This warranty gives you specic legal
rights, and you may also have other rights, which vary from country/state to country/state. Some countries/states
do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
Please keep this manual as it contains important information.
© The Little Tikes Company, an MGA Entertainment company.
LITTLE TIKES® is a trademark of Little Tikes in the U.S. and other
countries. All logos, names, characters, likenesses, images, slogans,
and packaging appearance are the property of Little Tikes.
Printed in China • 0521-0-C3 www.littletikes.com
www.littletikes.co.uk
www.littletikes.com.au
MGA Entertainment (Netherlands) B.V.
Baronie 68-70, 2404 XG Alphen a/d Rijn,
The Netherlands
Tel: [phone]
Little Tikes Consumer Service
2180 Barlow Road
Hudson, Ohio 44236 U.S.A.
1-800-321-0183
MGA Entertainment UK Ltd.
50 Presley Way, Crownhill, Milton
Keynes, MK8 0ES, Bucks, UK
[e-mail]
Tel: [phone]
Imported by MGA Entertainment
Australia Pty Ltd
Suite 2.02, 32 Delhi Road
Macquarie Park NSW 2113
1300 059 676
ADULT ASSEMBLY REQUIRED.
WARNING
• Keep these instructions for future reference.
• Prior to assembly, this package contains small parts: hardware which is a choking hazard and may contain sharp
edges and sharp points. Keep away from children until assembled.
• Protect your eyes. Always wear safety glasses when using a hammer.
•
Adult supervision required. Do not leave children unattended.
• DO NOT allow child to climb on the unit.
•
Ride-on toys should not be used near swimming pools, on or near steps, hills, roadways, or inclines.
• Ride-on toy should be used with caution since skill is required to avoid falls or collisions causing injury to the child
or third parties.
• Shoes must be worn at all times.
• Only one rider at a time.
• Maximum weight: 50 lbs. (23 kg) per child.
• Not to be used by children over 36 months due to size limitations.
CARE INSTRUCTIONS
•To prolong product life, do not leave the unit outside during inclement weather.
• Check all screws, capnuts and hardware twice monthly during usage and tighten as needed. Replace when necessary.
I
H
F
G
C
D
A
A
B
D
C
J
D - 2
E
Not included
1
4
KLR

ASSEMBLY
1
Place a front wheel (A) onto the peg on the front wheel
assembly (B), making sure the word “inward” on the wheel
faces toward the center of the unit. Press rmly until the
wheel snaps in place. Repeat for the other wheel.
Place one axle cap (D), color side down, onto a piece of
scrap wood (not included). Using a hammer, tap the axle (C)
rmly onto the axle cap. Then, set it aside.
Always wear safety glasses when using a hammer.
Place the pegs on the fender (F) into the slots on the fork of
the center unit (E) and press them into place. Then, press
down on the front edge of the fender until the lip of the
fender snaps into the slot in the center unit.
Place the back wheel (G) into the fork of the center unit (E).
Slide the axle (C) through opening on the fender, wheel,
fork assembly and out the other side.
Lay the unit on its side and, using a hammer, tap the second
axle cap (D) onto the other end of the axle.
Place the seat onto the center unit, making sure the peg on
the underside of the seat ts in the opening closest to the
front of the rider. Press rmly until the seat snaps in place.
NOTE: To adjust the seat as the child grows, press upward on
the spring-loaded peg on the underside of the seat and slide
the seat back until the peg slips into the second opening in
the center unit.
C
D
Place the front opening in the center unit over the top of the
front wheel assembly, making sure the screw opening in the
assembly is facing forward. Then, press down rmly.
Place the neck of the handlebars into the opening in the
center unit and align the arrows. Then, press down until it
snaps into place. Using a Philip screwdriver (not included)
install the screw (J) in the opening on the front of the
wheel assembly.
AA
B
E
F
G
C
E
D
2
34
H
56
I
J
78
SCREW OPENING
SHOULD FACE
FORWARD
23
When using the hammer, it is important to
tap the axle cap. If the cap is placed too
tightly, the wheel will not spin.
Attach the decal stickers to the unicorn’s ears, making sure
to attach the L to the left ear and the R to the right ear.
NOTE: Decals must be applied to a clean, dry surface. Wipe
clean with a dry rag before application. Remove air from
under the decals by applying pressure to the decals
starting from the center, and work towards the edges.
9K
L R