MGA Entertainment Smoshins SURprise Maker Kit User manual

Illustrations are for reference only.Styles may vary from actual contents.
A. 1 Surprise Maker
B. 2 Surprise Character Molds
inside 2 Mystery Shells
1
547303
GEL CONFORMS TO ASTM D4236
PATENT PENDING
ADULT SUPERVISION REQUIRED
CONTENTS
C. 2 Color Pouches
D. 1 Practice Color Pouch
E. 2 Surprise Faces, 2 Surprise Bellies and
2 Surprise Headpieces inside Polybags
™™
S
U
R
p
r
i
s
e
M
a
k
e
r
K
i
t
S
U
R
p
r
i
s
e
M
a
k
e
r
K
i
t
A. B. x2
E. x2 F. x2
G.
C. x2
Lift to open.
Lower to close.
Inside View
Pegs
YOUR SURPRISE MAKER
Top View
Go to Smooshins.com for a
fun instructional video.
F. 2 Character Stands
G. 1 Squeeze Tool
D.

2
NOTE: Before beginning, cover the play area to prevent possible damage.
GETTING STARTED
Gather:
1
Insert and align shell:
2
Close and align openings:
3
Insert the top of the shell rst (as shown) and
then insert the bottom for a perfect t.

3
To make sure your creation comes out
the cutest it can be, carefully read the
instructions on popping and mixing the
pouch before moving forward.
ATTENTION
Gather:
Pop: Try all the dierent methods to pop the inner color.
NOTE: Once it is popped, you will have 1 minute and 30 seconds to mix.
Mix:
(Not Included)
Start your timer!
1:30
Try all the dierent methods to mix the color.
The color is completely mixed when there is no clear part remaining.
QUICKLY pedal, swivel, swirl and twist the pouch to get the color mixed.
4
5
TIMER
Use your
ngers.
Use your
palms.
Use your
st.
Knead it!
Pedal! Rotate and
swivel it!
Hooray!
Keep trying!
Once you pop the color, begin to quickly mix the color with the clear portion.
Keep mixing!
Tip: Squeeze all of the color out from the inner pouch and quickly mix well with clear portion.
Tip: Create your first character with a practice pouch.

4
You must work quickly, so keep handy:
Remove and discard bow cap:
Insert and lock pouch
into surprise maker:
Insert the pouch through the slit on the squeeze tool.
Roll down to squeeze color into surprise maker. Use
your ngers to get as much in as possible.
Grow: Leave the pouch in the surprise
maker and wait four hours.
Don’t disrupt the magic. Don’t open the surprise maker.
Squeeze:
GETTING READY TO SQUEEZE
6
7
8
9
Insert! Roll!
Squeeze!
You will have 30 seconds to squeeze the color into the
surprise maker.
Turn pouch clockwise to lock in.
Insert all the way in.

5
Locked
YOUR MOLD
Hinges
Keys
Almost there...
•After 4 hours, turn the pouch counterclockwise and remove with some force to snap o
the hardened color.
DISCARD THE POUCH IMMEDIATELY.
• Open the surprise maker and remove the mystery shell.
• Use the tabs to open the shell. Remove the mold and polybags.
• Leave the character in the mold overnight and start on another mystery shell.
Unlock your mold: After leaving your character in the mold over-
night, remove the bow cap on the squeeze tool.
Then, turn the three keys and pull down the
four hinges.
10
11
Unlocked
Bottom View: KEYS

6
Open your mold: Slowly open the mold and ask an adult to
cut the hardened cord.
Remove your character: Use your ngers to work around the
character and gently pull it out. Then,
open the polybags.
Make your unique
character:
Insert the pegs behind the accessories into
the openings of your character.
12
13
14
Bellies are interchangeable
between characters that have the
same belly shape.

7
Clean the mold:
1
Lock the mold:
2
Insert and align mold:
3
If there is residue from the last use, wipe the mold with a dry
paper towel.
Close the hinges and turn the keys to lock the mold.
Insert the bottom of the mold rst (as shown) and
then insert the top for a perfect t.
Then, close the surprise maker and follow steps
3-14.
Locked
Unlocked
Bottom View: KEYS
USING THE SURPRISE MAKER AGAIN AND AGAIN

8
IMPORTANT INFORMATION
Please keep this manual as it contains important information.
www.smooshins.com
© 2017 MGA Entertainment, Inc.
SMOOSHINS™ is a trademark of MGA in the
U.S. and other countries. All logos, names,
characters, likenesses, images, slogans, and
packaging appearance are the property of
MGA.
16300 Roscoe Blvd.
Van Nuys, CA 91406 U.S.A.
[phone]
Printed in China
MGA Entertainment UK Ltd.
50 Presley Way
Crownhill
Milton Keynes, MK8 0ES
Bucks, UK
+ 0800 521 558
Visit
.com
to register your product
and to enter our sweepstakes
(No purchase necessary)
0617-1-E/INT
CLEANING
2
1
Use a dry paper towel to wipe out excess
material from the mold. If mixture remains, use
a damp cloth and dry thoroughly before
starting a new character.
Make sure the vent holes are cleaned out
and clear.
CAUTION
CLEANING THE MOLD
• DO NOT puncture the color pouch or intentionally expose the contents in the pouch unless it is going into the mold.
• Keep away from pets and sharp objects to avoid puncturing the pouch.
• DO NOT eat the contents of the pouch.
• DO NOT eat near the play area.
• Wash hands thoroughly with soap and water after playing or if product gets on your hands.
• Keep the color pouch away from clothing and furniture to prevent staining. Color transfer may occur.
• Keep pouch away from heat.
• Some pouches might be harder to pop than others. Avoid using excessive force to pop the inner color.
• DO NOT pop the color on a fragile surface such as a glass table.
• DO NOT step on or do anything that might damage the pouch.
• Mixing is crucial and will take practice to properly mix. A fully mixed pouch should have no remaining clear portion and be
mixed under 1 minute and 30 seconds.
• The valve inside of the color pouch will only open if it is inserted properly into the surprise maker.
• Avoid touching the mixture, and keep it away from your eyes and face.
• Do not open mold at anytime while character is growing inside the surprise maker.
• Wait overnight before removing your character from the mold.
• Be gentle when removing a character from the mold to prevent tearing.
• Use a paper towel to dry off the character if mixture is still wet.
• Do not wash the mold with water. If a paper towel doesn’t remove the color, leave it overnight and peel off excess color or
use a damp cloth.
• Use your squeeze tool to remove any mixture stuck to the top opening of the mold.
• Keep pouch at room temperature.
TROUBLESHOOTING
Character came out gooey
• Make sure the color and clear portions in the pouch are completely
mixed (see page 3).
• Leave character inside the mold overnight.
Color hardened inside pouch • Make sure to mix well within 1 minute and 30 seconds. Then, quickly
squeeze the color into the surprise maker.
• Make sure to squeeze the color into the surprise maker within 30 seconds.
• Squeeze as much color into the surprise maker as possible.
• Leave character inside the mold overnight.
Color didn’t ll the mold