Micasa MATFLED User manual

OPERATION AND
STORAGE MANUAL
Keep this manual with the appliance. If the appliance is to be used
by a third party, this instruction manual must be supplied with it.
MODEL: MATFLED
132-150CM LED DISPLAY
TOWER FAN

1
Thank you for choosing the Micasa LED Display Tower Fan. This fan
has multiple functions to provide you with a cool, healthy and luxurious
home experience. If operated and taken care of properly in accordance
with these instructions, this appliance will be useful for many years.
Features
• 8 speeds
• 24-hour timer
• 3 modes: normal, natural
or sleep
• LED display screen
• Ioniser: purifies air
• Remote control
• Oscillation
• Adjustable height
Before First Use
• Before first use, remove any stickers or similar from the appliance
except for the rating label.
• Dispose of any plastic bags as they pose a risk of suffocation to
young children.
Please read this manual before operating the appliance, and keep it in a
safe place for future reference. If this appliance is transferred to a new
owner, the manual should also be provided to the new owner.
LED DISPLAY
TOWER FAN

2
Important Safety Measures and Precautions
WARNING:
To reduce the risk of fire, electrical shock or injury to a person,
please note that this appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they are
supervised or have been given instruction concerning use of the
appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
• Before using, please check whether the available voltage is in
accordance with the rating label.
• Before using, please check that the wire and the plug are in good
condition. If the power supply cord is damaged, in order to avoid
unnecessary injures, please contact an electrical technician.
• Use the fan on a flat, dry floor only.
• Proper installation is required before using the fan.
• Turn off the power at the wall before pulling out plug, and keep your
hands dry when using the fan.
• Keep children away from the fan to prevent them from inserting their
fingers into the grille or blades.
• Do not hold the fan tightly when the blades are oscillating.
• When cleaning, please use a soft cloth and don’t use petrol, alcohol
or other organic solvents.
• Do not use near curtains.
• Don’t use the fan in hot, wet or chemical environments.
• The product is for household use only.
• Connect the appliance to a AC 230-240V supply of the voltage
specified on the rating plate.
• Never leave the fan unattended while it is in use. Always turn the
appliance to the OFF position and unplug it from the electrical outlet
when not in use.
• Extreme caution is necessary when any fan is used by or near
children, invalids or elderly persons, and whenever the fan is left
operating and unattended.

3
• Do not run cord under carpeting, and do not cover cord with throw
rugs. Keep the cord away from high traffic areas. Place the cord
where it will not be tripped over.
• Do not operate the fan with a damaged cord or plug, or after the fan
malfunctions, has been dropped or damaged in any manner.
• If the power supply cord is damaged, it must be replaced by the
manufacturer, a licensed service agent or a similarly qualified person
to avoid a hazard.
• Use the fan in a well-ventilated area. While using, keep the appliance
at a distance of no less than 20cm from walls or corners to ensure the
air intakes or exhaust openings are not be blocked unexpectedly.
• Do not insert objects, or allow fingers or any other objects near the
grilles or blades. Do not block air intakes or exhaust openings in any
manner.
• Do not immerse the fan in water.
• Do not use any cleaning chemicals such as detergents and
abrasives. Do not allow the interior to get wet as this could create a
hazard.
• When the unit is not in use, make sure that it is unplugged from the
wall (power) socket. To store the fan, you may pack it in the original
carton and store it in a cool and dry place.
• In case of malfunction, do not try to repair the fan yourself. This may
result in a fire hazard or electric shock. Contact a qualified after-sales
service provider.
Packaging
• After unpacking the appliance, check that all components are
included in the package and that the appliance has not been
damaged. If damage or incomplete delivery has occurred, contact
your authorised retailer.
• Do not throw away the original packaging. It can be re-used for
storage and transportation purposes.
• If disposal of packaging is necessary, please consider the
environment, and recycle where possible. Children should be
prevented from playing with polyethylene bags.

4
Appliance Description
Remote Control
and Control Panel
Reciever LED Display
Remote Control Slot
Air Outlet
Height
Adjustable
Column
(18cm)
Bse
Piece A Bse
Piece B
Handle
Air Inlet
Height Adjustment
Back view
12
13
11
Back view
12
13
11
Base A
Base A
Base B
Base B
LOGO
1. Remote controller
2. Control panel
3. Remote controller slot
4. Receiver
5. LED display
5. Air outlet
7. Fna body
8. Height adjustment column
9. Base piece A
10. Base piece B
11. Handle
12. Air inlet
13. Height Adjustment
3
1, 2
5
6
9
7
10
8
Front view
Control panel
Remote controller
4
20 cm
adjustable
LOGO
Mode
Timer
Ionizer
Oscillation
1 2 3 4 5
7777
6
1. Timer setting
2. Normal wind mode
3. Sleep wind mode
4. Natural wind mode
5. Ioniser
6. Fan speed &
timer display
7. Oscillation
LED Display
Control panel Remote controller
Mode
Timer
Ionizer
Oscillation
Controller
AAA
batteries
Battery
cover
Locked Unlocked
New panel
LED DISPLAY, CONTROL PANEL AND REMOTE CONTROL
Back view
12
13
11
Back view
12
13
11
Base A
Base A
Base B
Base B
LOGO
1. Remote controller
2. Control panel
3. Remote controller slot
4. Receiver
5. LED display
5. Air outlet
7. Fna body
8. Height adjustment column
9. Base piece A
10. Base piece B
11. Handle
12. Air inlet
13. Height Adjustment
3
1, 2
5
6
9
7
10
8
Front view
Control panel
Remote controller
4
20 cm
adjustable
LOGO
Mode
Timer
Ionizer
Oscillation
1 2 3 4 5
7777
6
1. Timer setting
2. Normal wind mode
3. Sleep wind mode
4. Natural wind mode
5. Ioniser
6. Fan speed &
timer display
7. Oscillation
LED Display
Control panel Remote controller
Mode
Timer
Ionizer
Oscillation
Controller
AAA
batteries
Battery
cover
Locked Unlocked
New panel

5
Back view
12
13
11
Back view
12
13
11
Base A
Base A
Base B
Base B
LOGO
1. Remote controller
2. Control panel
3. Remote controller slot
4. Receiver
5. LED display
5. Air outlet
7. Fna body
8. Height adjustment column
9. Base piece A
10. Base piece B
11. Handle
12. Air inlet
13. Height Adjustment
3
1, 2
5
6
9
7
10
8
Front view
Control panel
Remote controller
4
20 cm
adjustable
LOGO
Mode
Timer
Ionizer
Oscillation
1 2 3 4 5
7777
6
1. Timer setting
2. Normal wind mode
3. Sleep wind mode
4. Natural wind mode
5. Ioniser
6. Fan speed &
timer display
7. Oscillation
LED Display
Control panel Remote controller
Mode
Timer
Ionizer
Oscillation
Controller
AAA
batteries
Battery
cover
Locked Unlocked
New panel
Back view
12
13
11
Back view
12
13
11
Base A
Base A
Base B
Base B
LOGO
1. Remote controller
2. Control panel
3. Remote controller slot
4. Receiver
5. LED display
5. Air outlet
7. Fna body
8. Height adjustment column
9. Base piece A
10. Base piece B
11. Handle
12. Air inlet
13. Height Adjustment
3
1, 2
5
6
9
7
10
8
Front view
Control panel
Remote controller
4
20 cm
adjustable
LOGO
Mode
Timer
Ionizer
Oscillation
1 2 3 4 5
7777
6
1. Timer setting
2. Normal wind mode
3. Sleep wind mode
4. Natural wind mode
5. Ioniser
6. Fan speed &
timer display
7. Oscillation
LED Display
Control panel Remote controller
Mode
Timer
Ionizer
Oscillation
Controller
AAA
batteries
Battery
cover
Locked Unlocked
New panel
Installation
1. Take out the two bases from the
gift box. Connect base A and B
to make one unit (see below).
2. Connect fan body with the base
using the 4 screws provided
(see below).
Operation
ON/OFF BUTTON
Press to turn the fan ON/OFF. Press it once, and the fan will start
operating. The LED display will show the default wind level 1. Press the
button again to stop the fan.
IONISER
Press for the fan to start cleaning and freshening the air. Press again
to stop the function. The Ioniser light indicator will be displayed on
the screen when this function is switched on.

6
MODE
Choose dierent wind modes (sleep, natural, normal) by pressing this
button until the type of breeze desired is indicated on the LED display
panel. The default wind mode is normal when this function is switched
ON. To start natural or sleep mode, please set the wind speed first;
then the natural or sleep wind mode will run from the maximum to
minimum fan speed as a cycle.
Normal wind mode:
The light indicator will be switched ON when this mode is selected.
Natural wind mode:
The light indicator will be ON when this mode is selected.
The fan will run from selected maximum wind level to minimum wind
level mode in a cycle.
Sleep wind mode:
The light indicator will be ON when this mode is selected.
The fan will run from selected maximum wind level to minimum wind
level in a cycle. This mode will reduce fan speed once every half hour.
Then, level 1 fan speed will be maintained until the unit is turned o.
TIMER DISPLAY
Press this button to set the desired timer function. When the timer
display flashes, press the /to choose the duration of time. Each
press will increase time by 1 hour up to maximum of 24 hours. The
LED display shows the timer setting. Press any button, or wait for 3
seconds to confirm the setting. To cancel the setting, press the timer
button again, and press the button to set as 00 Hr.
OSCILLATION FUNCTION
Press this button to activate the oscillation function to adjust airflow
direction. The default oscillation angle is 60° and airflow direction can
be selected for 60°, 90°, 120° or 360°. Press the same button again to
turn o the oscillation function. The degree icon will light up
accordingly when the oscillation angle is selected.
SPEED
Choose from the total of 8 fan speed settings by pressing the button
/ from 1 - 8 levels. The default speed is level 1.

7
/SWITCH
Press this switch to increase or decrease the timer or fan speed settings.
USING THE REMOTE CONTROL
The remote control must be pointed towards the receiver on the fan for
function selection.
Do not block the line of sight between the remote control and the
receiver.
Handle the remote control with care. Do not drop the remote control
on the floor or bang it against hard objects.
USE OF BATTERIES
Back view
12
13
11
Back view
12
13
11
Base A
Base A
Base B
Base B
LOGO
1. Remote controller
2. Control panel
3. Remote controller slot
4. Receiver
5. LED display
5. Air outlet
7. Fna body
8. Height adjustment column
9. Base piece A
10. Base piece B
11. Handle
12. Air inlet
13. Height Adjustment
3
1, 2
5
6
9
7
10
8
Front view
Control panel
Remote controller
4
20 cm
adjustable
LOGO
Mode
Timer
Ionizer
Oscillation
1 2 3 4 5
7777
6
1. Timer setting
2. Normal wind mode
3. Sleep wind mode
4. Natural wind mode
5. Ioniser
6. Fan speed &
timer display
7. Oscillation
LED Display
Control panel Remote controller
Mode
Timer
Ionizer
Oscillation
Controller
AAA
batteries
Battery
cover
Locked Unlocked
New panel
If the remote control will not be used for a long period of time,
remove the batteries from the battery compartment.
The remote control uses two AAA batteries. Both of them should
be new and replaced at the same time when they have discharged.
(Batteries are not included.)
Clean battery contacts and also those of the device prior to battery
installation.
Ensure the batteries are installed correctly with regard to polarity,
matching +/- sides of the battery to the corresponding indications on
the remote control.
Remove used and dead/discharged batteries promptly.

8
HEIGHT ADJUSTMENT
Back view
12
13
11
Back view
12
13
11
Base A
Base A
Base B
Base B
LOGO
1. Remote controller
2. Control panel
3. Remote controller slot
4. Receiver
5. LED display
5. Air outlet
7. Fna body
8. Height adjustment column
9. Base piece A
10. Base piece B
11. Handle
12. Air inlet
13. Height Adjustment
3
1, 2
5
6
9
7
10
8
Front view
Control panel
Remote controller
4
20 cm
adjustable
LOGO
Mode
Timer
Ionizer
Oscillation
1 2 3 4 5
7777
6
1. Timer setting
2. Normal wind mode
3. Sleep wind mode
4. Natural wind mode
5. Ioniser
6. Fan speed &
timer display
7. Oscillation
LED Display
Control panel Remote controller
Mode
Timer
Ionizer
Oscillation
Controller
AAA
batteries
Battery
cover
Locked Unlocked
New panel
1. Rotate the height adjustment column lock in an anti-clockwise
direction to unlock the height adjustment column.
2. Hold the tower fan body to adjust the range of height (0-20 cm).
3. Rotate the height adjustment column lock in a clock-wise direction
to lock the height adjustment column tightly.
Cleaning and Maintenance
• Use only lukewarm water and mild detergent to clean the appliance.
Do not use corrosive or acidic solutions.
• DO NOT wet or immerse the appliance, motor, switch, power cord or
plug in water.
• If you dont use the fan for a long period of time please keep in a dry,
cool place.
NOTE: This electrical appliance is manufactured in accordance with
the relevant safety requirements. Repairs should only be carried out by
qualified persons using original spare parts, otherwise this may result in
considerable danger to the user. Please contact the Customer Service
Centre for after-sales service if required.
Specifications
Model: MATFLED
Power: 50W
Voltage: 220-240V
Frequency: 50Hz
Height: 132-150cm
Adjustable height: 18cm

Customer Support
www.asiapacbrands.com
Helpline New Zealand call toll free 0508 274 2722
Australia call [phone]
Distributed by
Asia Pacific Brands Limited
PO Box 301145 Albany,
Auckland 0752, New Zealand