Micro Direct MD Spiro SpiroBank II User manual

SpiroBank II Quick Start Guide
1. The SpiroBank II Basic can be turned on or off by holding this button
there will be 3 screens that appear:
the first is the logo splash screen
and shows the date & time
www.mdspiro.com
Micro Direct, Inc.
803 Webster Street
Lewiston, ME 04240
Telephone [phone]
Fax [phone]

SpiroBank II Basic Quick Start
The second screen shows:
the number of patient files,
the number of spirometry tests,
the amount of free memory
and the battery symbol indicating
the amount of battery charge
It will also show you the configuration
icon that brings you to the
Configuration Menu
Pressing the right arrow
under this symbol will take you to the
Configuration Menu
Entering patient information
Press the left arrow
under the I.D. symbol
This screen appears:
There are two choices for entering patient
information
Choose New by pressing the left arrow to
create a new patient
Choose Modify by pressing the right arrow to
edit an existing patient file.
The third screen is the Main Screen where
you can choose a function.
You can also navigate the configuration
menu from the main screen pressing the
ESC button
Use the left & right arrow buttons to scroll up
and down through configuration menu.

Selecting New Patient:
the insert patient data screen will appear
Use the minus and plus buttons to increase/decrease
numbers in the number fields.
Once birthdate, height (inches or cm) and weight (lb or
kg) have been entered, two choices will appear for
gender. Press the minus to highlight male or press the
plus to highlight female.
Then press the OK button to make your choice.
Next the ethnicity option will appear.
Use the left and right arrow to scroll up and
down through the choices. Press the OK button
to confirm your choice.
Now you will be back on the main screen
SpiroBank II Basic Quick Start
To Perform an FVC Test
Insert the flow turbine with the cardboard mouthpiece pointing out the same side the screen is on and
twist it clockwise to lock.
Back on the main screen, press the minus sign under the
spiro symbol
A new screen appears with spirometry test choices
(The POST choice will be grayed out until at least one
Pre FVC test is done).
Press the button under the choice of test.
The next screen will have instructions about performing the test.
The patient may begin to perform the test at this screen.
The test will time out if not started in time.
Connect the device to the computer via the micro USB cable to charge it.
The screen will say ‘external control’ and will remain on while connected.

SpiroBank II Basic Quick Start
To access the default configuration menu
To access patient data from the main display
To perform a new test of a patient recalled from the patient records
To insert new patient data
To modify patient data
To display the most recent test of a patient
To show the last test performed
To access the database of the performed tests
To search a test with the date of birth of a patient
To search a test starting from a specific date onwards (partial database)
To scroll through a database from beginning to end and vice versa (complete database)
Male patient selection
Female patient selection
To access spirometry testing type
To perform a forced vital capacity spirometry test FVC/search FVC tests in memory
To perform a slow vital capacity spirometry test VC/search VC tests in memory
To perform a spirometry test with a bronchodilator