Microchip Technology PD-USB-DP60 User manual

microchip.com
1. Connect an IEEE®802.3af/at/bt-compliant
PSE to the PD-USB-DP60’s “PoE IN” RJ45
socket using a standard Cat 5/5e/6 Ethernet
cable. (Note: The maximum allowed length
of the Ethernet cable is 100 meters).
2. Check that the “Power” LED is yellow to
verify that the PD-USB-DP60 is powered on.
3. Connect one side of the supplied USB
Type-C®cable to the PD-USB-DP60’s
USB-C socket. (Note: Any USB-C connec-
tion polarity is allowed.)
4. Connect the other side of the USB Type-C
cable to the USB-C powered device.
5. Verify that the USB-C powered device is
getting power from the PD-USB-DP60.
PoE IN
USB-C®
PD-USB-DP60 Quick Start Guide

Ethernet-to-USB-C Data Dongle
If PoE power isn’t available, and wired Etherent
is required, the PD-USB-DP60 can be powered
from a USB Host:
1. Connect one side of the supplied USB Type-C
cable to the USB-C host.
2. Connect the other side of the USB Type-C
cable to the PD-USB-DP60’s USB-C socket.
3. Connect a standard Cat 5/5e/6 Ethernet cable
the PD-USB-DP60’s “PoE IN” RJ45 socket to
connect to an IEEE 802.3 10/100/1000 Mbps
network.
LED Indicators
LED Appearance Status
Power
No Light
PD-USB-DP60 is:
powered o or powered
on as a dongle
Yellow On PD-USB-DP60 is powered
on
Link/
Act
No Light No data link
Green On Data link on
Green
Blinking Data activity on

Specicaons
Data
• PoE IN
• 10/100/1000 Mbps
• USB Type-C
• USB 2.0
• USB 3.1 Gen 1
Power
• PoE IN
• Input Voltage: 42-57 VDC
• Input Current: 1.75A max
• USB Type-C
• 5 VDC/3A
• 9 VDC/3A
• 15 VDC/3A
• 20 VDC/3A
Environmental Informaon:
• Operating Temperature: 0°C to 40°C (32°F to 104°F)
• Operating Humidity: 90% Max (non-condensing)
• Storage Temperature: −20°C to +70°C (−4°F to +158°F)
• Storage Humidity: 95% Max (non-condensing)
• Dimensions: 22.4 mm (H) x 66.8 mm (W) x 105.2 mm (L)
• Weight: 150g

The Microchip name and logo and the Microchip logo are registered trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their
respective companies.
© 2021, Microchip Technology Incorporated. All Rights Reserved. 7/21 DS00003800B
Notes
• If the USB host is running the Windows®operating system, the device driver should be automat-
ically installed (plug and play) after the PD-USB-DP60 is connected. Linux®may require driver
installation in case the LAN7800 Ethernet controller is missing. Apple®requires driver installation.
• If the USB host doesnt recognize the PD-USB-DP60 as a USB device, please go to the LAN7800
product page to download and install the appropriate device driver.
• Powering multiple PD-USB-DP60 from the same PoE multiport midspan may aect data/power per-
formance to connected USB-C devices (i.e. laptop) if they are sharing common peripheral equipment
such as monitors, projectors, etc.
Technical Support
For technical support please visit the Microchip Technical Support Portal www.microchip.com/support
LAN7800 Driver
To download device drivers for the LAN7800 please visit the LAN7800 WEB page: LAN7800
USA/Canada: [phone]