Microcom phoneBuddy Classic User manual

User’s manual
Bedienungseinleitung
Uživatelský manuál
Felhaszálói Kézikönyv
Instrukcja użytkownika
Návod k obsluhe

User’s manual
English
maual-Classic_ALL 14.2.2003 15:22 Stránka 3

II
II
Main Diagram
LCD display
Coil cord
Line cord
Battery
compartment
Jackfor coil cord
Ringer HI/LO
Switch Speaker olume
HI/LO Switch
Adaptor
socket
Jackfor line cord
Handset
Speaker
Hook switch
IN USE indicator
NEW call and
NEW mesage
indicator
maual-Classic_ALL 14.2.2003 15:22 Stránka 4

II
IIII II
Function Description Functions of control key
Information on the display
Descriptions of icon
Ikons Description
When pick up the handset, this icon will turn
on to indicate that the unit is in use mode.
When press the speaker button, this icon
will turn on to indicate that the unit is in spe-
akerphone mode.
After dialled out about 5 seconds, this icon
will turn on to timer, and will turn off after
hang up about 8 seconds.
During writing a message, press # button, it
will turn on, it mean that the letter is in
upper case mode.
When you recei e a new SMS message or
oice mail, this icon will show on the LCD to
remind you to read.
If there are new calls in memory, this icon
will turn on. After all the new calls ha e
been re iewed, the icon will be turned off.
If the call comes repeatedly, this icon will
turn on.
Functions
Buttons Description
To enter the digits 0-9
To enter *
To enter #
To sa e a temporary number
To read new or old message in the inbox of Box1
To quickly write messages in Box1
To confirm an action
This button function as CALL BACK when browsing the incoming
calls. Please refer to Calling back a CID number in Caller iden-
tification list section for details.
This unit has up to 30 memory locations in the Phone book me-
mory. For details, please see Phone book section in this manu-
al.
This unit has up to 90 memory locations in the CID memory. For
details, please see Caller identification list section in this user ma-
nual.
This unit has up to 30 memory locations in the outgoing memo-
ry. For details, please see Outgoing calls section in this manual.
To delete an entry or a record in the memory
This button functions as last number redial when you make a call
(32 digits maximum). Numbers that are longer than 32 digits will
not be kept in the redial memory.
To switch between 2 lines.
To enter the menu list
To cancel
To confirm
To put your phone off-hook for on-hook dialling or con ersation.
To switch back, simply pick up the handset and speak as normal.
To scroll up/down when browsing selections. And to mo e the
cursor to left/right when editing a record.
To up page
To down
page
Messages display area
English
maual-Classic_ALL 14.2.2003 15:22 Stránka 5

2
2
Content
Main Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I
Function Description . . . . . . . . . . . . . . . . . . . . . . II
Information on the display . . . . . . . . . . . . . . . . . . II
Descriptions of icons . . . . . . . . . . . . . . . . . . . . . . II
Functions of control key . . . . . . . . . . . . . . . . . . . . II
Safety precaution . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installing the base unit . . . . . . . . . . . . . . . . . . . . 3
Presetting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setting the date and time . . . . . . . . . . . . . . . . . . . 5
Setting the LCD contrast . . . . . . . . . . . . . . . . . . . 5
Choosing the ringer melody . . . . . . . . . . . . . . . . . 5
Resetting the unit . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setting the area & LDS code . . . . . . . . . . . . . . . . 5
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Handsfree talking . . . . . . . . . . . . . . . . . . . . . . . . . 6
Predialling calls . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Character map . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Storing the names and numbers . . . . . . . . . . . . . . 8
Reviewing the names and numbers . . . . . . . . . . . 8
Deleting the names and numbers . . . . . . . . . . . . . 9
Dialling a number from phonebook . . . . . . . . . . . . 9
Editing the names . . . . . . . . . . . . . . . . . . . . . . . . 9
Caller identification list . . . . . . . . . . . . . . . . . . . 10
Reviewing the caller list . . . . . . . . . . . . . . . . . . . 10
Deleting single CID number . . . . . . . . . . . . . . . . 10
Deleting all CID numbers . . . . . . . . . . . . . . . . . . 10
Copying a CID number to phonebook . . . . . . . . 10
Calling back a CID number . . . . . . . . . . . . . . . . . 11
Outgoing calls . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Reviewing and dialling outgoing numbers . . . . . . 11
Text message (SMS) . . . . . . . . . . . . . . . . . . . . . . 12
Writing, storing and sending an SMS . . . . . . . . . 12
Setting the box code . . . . . . . . . . . . . . . . . . . . . 13
Clearing a set code number . . . . . . . . . . . . . . . . 13
Inbox list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Outbox list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
SMS centre . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
maual-Classic_ALL 14.2.2003 15:22 Stránka 2
Feature list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

33
33
Safety precautions Installing the ase unit
Safety precautions
To reduce the risk of fire, electrical shock and injury, ple-
ase follow these basic safety precautions before you use
this equipment.
1. Carefully read the instructions in this manual.
2. Read the warnings marked on the unit.
3. When cleaning, unplug the phone. Use a damp
cloth. use liquid or aerosol moist.
4. Do not use this equipment in surroundings
5. Do not place objects on the line cord that may cau-
se damage.
6. A oid spilling any liquids on the unit.
7. Unplug this telephone from the wall outlet and refer
ser icing to qualified ser ice personnel.
Preparing the telephone
The package contains the following:
One base unit
One Handset with coil cord
One line cord
4 AA size 1.5V batteries
One User manual
One adaptor
Installing the ase unit
Notes on the installation
The unit is designed for operation in rooms with a tem-
perature range from +5 to +45.
Inserting the batteries
The SMS phone requires four 1.5V AA size batteries to
acti e display.
1. Remo e the battery co er from the back of your
SMS phone.
2. Insert four new 1.5V AA size batteries note
the +/- polarity marks into the compartment.
3. Replace the co er securely.
Congratulations
for buying our high quality product,
please read de ice properly the manual carefully in order to benefit all features and operate
the SMS phone.
Homologation:
English
maual-Classic_ALL 14.2.2003 15:22 Stránka 3

44
44
Installing the ase unit
Connecting the ase unit
1. Insert the small plug on the mains cable into DC jack, insert power supply unit into mains socket.
2. Insert one end of the telephone cable into line jack, insert another telephone jack into telephone socket.
• Only the power supply unit supplied use as indicated on the underside of the de ice.
• If you buy another cable, ensure that the telephone leads ha e 3-4 assignment.
Attention: new telephone cable. Only use the cablesupplied.
Power supply unit with mains cable
(plug types ary according to different countries) Telephone jack with telephone cable
(type aries depending on country)
maual-Classic_ALL 14.2.2003 15:22 Stránka 4

55
55
Presetting
Setting the date and time
In standby mode, the unit can show the date and time to help
you keep your appointments. You need to set the date and
time so that the date and time when messages or calls are
recei ed can be displayed correctly.
Open the menu
Select the menu item and confirm
Select the menu item and confirm
The current setting is displayed
Select the Month/Day/Hour/Minute field
Enter the month/day/hour/minutes
(e.g. 12:36 23/08, as shown)
Select to confirm
Select to cancel
Choosing the ringer melody
You can choose the ringer melody
Open the menu
Select the menu item and confirm
Select the menu item and confirm
(in de elopment)
Resetting the unit
After reset the unit, all the settings will be deleted.
Open the menu
Select the menu item and confirm
Select the menu item and confirm,
LCD shows Reset now?
Press to confirm, and the LCD shows
Format... . When formating is ended
the display will return to standby mo-
de.
• When set the date and time, you need to enter, two digits at
a time e.g. the month August, in the month field you need to en-
ter 8. If not, the entry number is in alid.
• The time is in 24h mode.
• The date and time will be automatically set when you recei e
a first call to this unit. (FSK standard)
Setting the LCD contrast
There are 15 le els for you to choose.
Open the menu
Select the menu item and confirm
Select the menu item and confirm
The current setting is displayed
(e.g. Contrast: 10)
Select the le el you desired
Select to confirm
Select to cancel
nebo
Phone Setup
Set Clock
Phone Setup
Contrast
Phone Setup
Ring Tone
Phone Setup
Main Reset
English
maual-Classic_ALL 14.2.2003 15:22 Stránka 5

66
66
Presetting Making calls
Making calls
To make a call, simply pick up the handset and wait for
the dialling tone.
Then, dial the desired telephone number with the nu-
meric keys.
To end a call, replace the handset onto the cradle of
the base unit, or press the hook switch.
Handsfree talking
Press the speaker button to put your phone off-ho-
ok, enter the phone number to be called, afterwards,
the number will be dialled out accordingly. And OHD
works with phone numbers stored in phone book and
redial list.
Predialling call
Enter the phone number to be called, then press the
speaker button, then the number will be dialled out
accordingly.
Setting the area & LDS code
Open the menu
Select the menu item and confirm
Select the menu item and confirm
LCD shows Area Code1
Enter the area code number0~9
(up to 4 digits)
Press twice to confirm and enter the
LDS code setting.
LCD show LDS Code .
Enter the LDS code number0~9 (up
to 2 digits)
Press to confirm and exit.
• If you set the area code number, when dialling the number that
with the set area code number in phonebook or CID list, the num-
ber can be dialled out without the area code number.
• If you set the LDS code number, when dialling the long distance
number(more than 7 digits) in phonebook or CID list, the number
can be dialled out with the LDS code number. In re iewing state,
the LDS code number can not be displayed.
• If the phone number is not correct, press the button to cancel the
precious entries and mo e backward.
Phone Setup
Area Code
maual-Classic_ALL 14.2.2003 15:22 Stránka 6

77
77
Character map
Character map
• To change a letter from upper case to lower case or ice ersa press .
• Control the cursor with.
• The letter to the left of the cursor is deleted with
• Letters are always inserted to the left of the cursor.
1X 2X 3X 4X 5X 6X 7X 8X 9X 1 X 11X 12X 13X 14X 15X 16X
@1 . , ? ! – ✽#&/ : ( )
Aa Bb Cc 2 Ää Ç
Dd Ee Ff 3 Éè é
Gg Hh Ii 4
Jj Kk Ll 5
Mm Nn O 6 ~ Nñ Öö
Pp Qq Rr Ss 7
Tt Uu Vv 8 Üü
Ww Xx Yy Zz 9 Ææ Øø Åå
‘ +<=>∆_ΦΦΓΓΛΛΩΩΠΠΨΨΣΣΘΘ
a£$Y
a➝A
English
maual-Classic_ALL 14.2.2003 15:22 Stránka 7

88
88
Phone ook
The unit can store 30 names and numbers in phonebook.
Storing the names and numbers
Press to confirm
Open the menu
Select the menu item and confirm
Then enter the phonebook setting
and LCD will show the Review and
Add Entry
Select the menu item and confirm
LCD will show Enter Number
Enter the number (e.g.:1236008, as
shown)
Select to confirm and enter the name
setting,
LCD shows Enter Name
Enter the name(e.g.:John Smith, as
shown)
Select to confirm and the LCD shows
Saved!
Select to cancel
or
• You can store another name and numbers following abo e
steps
• You can press button to cancel the pre ious entries
• The entered number is up to 16 digits
• The entered name is up to 16 characters
• If there is no entry in phonebook, display will show Empty
• At the end of the entry, display will show End Of List
Reviewing the names and num ers
Press to confirm
Open the menu
Select the menu item and confirm
Then enter the phonebook setting
and LCD will show the Review and
Add Entry
Select the menu item and confirm
LCD will show the last phonebook
number
Scroll to the next or pre ious entry
To exit
or
Phone Setup
Add Entry
Phone Setup
Re iew
maual-Classic_ALL 14.2.2003 15:22 Stránka 8

99
99
Phone ook
Deleting the names and num ers
When the display shows you desired number
Press and LCD shows Deleted?
Select to delete
Select to cancel
Dialling a num er in phone ook
When the display shows you desired number
Press or pick up the handset
Press to dial out
Editing the names
When the display shows you desired number
Press and the LCD shows
Edit name?
Press again to confirm
The name field will flash
Enter the new name (e.g. John smith,
as shown)
Press to confirm and the LCD shows
Saved!, then exit.
English
maual-Classic_ALL 14.2.2003 15:22 Stránka 9

11
1100 00
Phone ook
Caller Identification list
This unit can store up to 90 incoming calls name and
number, date and time
• If the memory storage is full, when the next call comes in,
the oldest record will be o erwritten for the New Call Record.
• When you ha e recei ed New Call, the NEW LED will flash until
you re iew it.
• At the end of the call record list, LCD will show End Of List
• If there is no call, LCD will show No Calls.
Reviewing the caller list
Press to show the total and new CID
calls
Open the menu
Select the menu item and show the
total an new CID calls
Re iew the CID numbers
or
Deleting single CID num er
In the re iew mode:
Press to get your desired number
that shown on the LCD
Press once and LCD shows Delete?
Select to delete
Select to cancel
Deleting all CID num ers
Press to show the total and new CID
calls
Open the menu
Select the menu item and show the
total and new CID calls
Press once and the LCD will show
Del All CID?
Select to delete and the LCD shows
No Calls
Select to cancel
Copying a CID num er to phone ook
In the re iew mode,
Press to get your desired number
that shown on the LCD
Press once and the LCD will show
Copy to Phonebook?
Press again and confirm, LCD shows
Saved!
Select to cancel
or
Calls In
Calls In
maual-Classic_ALL 14.2.2003 15:22 Stránka 10

11
1111 11
Phone ook
Calling ack a CID num er
Press to show the total and CID calls
Open the menu
Press to show the total and CID calls
Press to get your desired number
that shown on the LCD
Press or pick up the handset
Press to dial out the number
For details, please consult your phone
ser ice pro ider for the a ailability of
this function.
If the phone can not recognize the
information within the caller display
messages properly, it will show Error.
This does not mean your phone is
defecti e
Outgoing calls
You can store up to 30 last dialled outgoing calls number
Reviewing and Dialling outgoing num ers
Press to show the last dialled num-
ber
Open the menu
Select the menu and confirm, the
LCD shows the last dialled number
Press to get your desired number
that shown on the LCD
Press or pick up the handset
Press to dial out the number
• The call back function will not dial the phone number properly if
the selected call record is blocked or it is not a ailable.
• If the line is busy, hang up the phone to get a dial tone and then
press REDIAL button to dial the last number dialled.
If the caller used the option to pre ent
his name and number from being sent,
“PRIVATE” will be shown on the
display.
OUT OF AREA will display when
someone calls from an area where the
operator is not offering the caller iden-
tification ser ices or an area that is not
yet pro iding name and number deli-
ery to your area ia the long distance
net work.
If you ha e oice mail ser ice from
your telephone company and a recor-
ded message is left, the display will
show MESSAGE WAITING .
Icon will then appear on the right of
the display. The icon will remain until
you ha e retrie ed your oice mail.
or
or
• When re iew to the end of the call record list, display will show.
End Of List.
PRIVATE
OUT OF AREA
MESSAGE
WAITING
ERROR
Calls In
Calls Out
English
maual-Classic_ALL 14.2.2003 15:22 Stránka 11

11
1122 22
Text message
Text message (SMS)
With this SMS phone you can send and recei e text mes-
sages (SMS messages). SMS messages can only be rece-
i ed by de ice which support this feature (mobil phones,
PCs, other telephones)
Prerequisite:
CID
Caller identification (CID) and station number transmission
must be enabled at your fixed network telephone connecti-
on.
Contact your network pro ider enable is features for your
telephone connection.
Writing, storing and sending an SMS
Your de ice has four SMS boxes, they are independent
from each other.
Each box can store at least 20X160 characters messages
or up to 99 messages, they are not lost in the e ent of a po-
wer off.
The unit will recei e messages as long the memory storage
is not full. In late of full memory the unit shows Inbox Full
and how many messages are stored. You need to free up
space for new messages.
The unit can send short messages (up to 160 characters).
SMS sending are not automatically stored. If you want to
store an SMS you must do this before sending it.
Open the menu
Select the menu item and confirm
Select the menu item and confirm
Open the input field
Press to quickly write a new messa-
ge in Box1
For information on entering letters
and characters, see page 9.
Mo e the cursor in the
text field
The next characters ente-
red will appear to the left
of the cursor.
Delete characters to the
left of the cursor.
Press to make a space
Press to switch from up-
per case to lower case af-
ter a space or ice ersa
Press to confirm
Store the SMS message in the Out-
box to send it later if you like.
Send the SMS immediately and
the unit will ask you to enter the
recipientes telephone number,
Enter Number.
Enter the recipient s telephone num-
ber from the directory or dial it ma-
nually.
• Press phonebook button then use
or button to get the desired num-
ber from phonebook.
• Press cid button then use or button
to get the desired number from CID
list.
Press to send out
SMS ShortMessageSer ice
• During the sending, the LCD shows SMS Sending
• If the net is busy, then LCD will show Try Again
• If you press button while you are sending. SMS message
LCD will show Cancelled.
• If the message was not sent out, the unit will return back to
standby mode, and the LCD shows Send Fail
We ' r e happy
you g o t t h e
promotion.
➞
or
or
or
SMS
Box1..4
Write
Store
Send
maual-Classic_ALL 14.2.2003 15:22 Stránka 12

11
1133 33
Text message
Setting the ox code
You can use different SMS boxes in pri ate mode by
defining a pin by number for Box2, Box3 and Box4.
Box1 is for public use.
Setting a new code
Open the menu
Select the menu item and confirm
Select the menu item and confirm
Select the menu item and confirm
Select the menu item and confirm
The LCD shows Enter Code, enter
the code number(0~9)
Press to confirm, LCD shows
Repeat Entry, enter the same code
number to reconfirm.
Press to confirm, LCD shows
Message Sent.
• If the second code number is different to the first one, the LCD
will show Code Error.
• Set the code of Box3 and Box4 same as the steps of Box2.
• If you already set the code, when you want to enter the Box,
you need to enter your code number firstly. • If you remo ed the code number, you can enter the box without
it.
• Also you can set a new code number again with the same steps
of Setting a new code number.
Clearing a set code num er
Open the menu
Select the menu item and confirm
Select the menu item and confirm
Select the menu item and confirm
Select the menu item and confirm,
the LCD shows Enter Code, then
enter the code number you ha e set.
Press to confirm, LCD shows
Code Removed, then exit.
SMS
SMS Setup
Box Code
Box2
New Code
SMS
SMS Setup
Box Code
Box2
New Code
English
maual-Classic_ALL 14.2.2003 15:22 Stránka 13

11
1144 44
Text message
In ox list
Reading and deleting received SMS message
When you get a new message, you will hear a beep to-
ne and the LCD will show icon and the NEW LED will
flash twice at a time to signal until you re iew it.
Select the menu item and confirm
Select the menu item and confirm
Select the menu item and confirm
Select the menu item and open the
inbox list
Press to quickly read the new mes-
sages in the inbox of Box1. If there is
no new message, will show the last
recei ed SMS message.
Press to read
Scroll to the next or pre ious SMS
Press to delete the desired SMS
message that shown on LCD, then
LCD shows Delete?
Press to delete
Press to cancel
Options while reading
After reading an SMS you can immediately reply to it and
you can access other functions.
Open the menu, then select the option you want.
Reply Can write a new message or edit
this message or fast answer
(Answer YES/Answer No/Call Me)
Forvard Send a text message to someone
else
Call Back Make a call to the message sender
Add to PBK Copy the telephone number of the
SMS to the phonebook, also will
indicate to enter name.
• If a new message is recei ing, LCD will show Receiving.
• If there is no message, LCD will show No Message.
• In the recei ed message, you will see numbers from, the date
and time.
• At the end of the messages you will see -- End --
• The unit will display the new and total recei ed SMS messages
number: Inbox XX(new)/XX(total), if there is no message the unit
will show Inbox / .
or
SMS
Box1
Inbox
maual-Classic_ALL 14.2.2003 15:22 Stránka 14

11
1155 55
Text message
• If there is no message, LCD will show No Message.
• In the recei ed messages, you will see numbers from and the
date and time.
• At the end of the messages you will see -- End --.
• LCD will show the stored SMS message number Outbox XX, if
there is not message will show Outbox .
Out ox list
Reading, editing, sending and deleting sto-
red SMS messages
Select the menu item and confirm
Select the menu item and confirm
Select the menu item and confirm
Select the menu item and open the
outbox list
Press to re iew
Scroll to the next or pre ious SMS
SMS centre
To send and recei e SMSs you need the telephone num-
ber of the ser ice pro ider SMS centre.
Select the menu item and confirm
Select the menu item and confirm
Select the menu item and confirm
Select the menu item and confirm
Select the menu item and confirm
LCD shows Enter Number, then en-
ter the number
Press and confirm
Select to cancel
Press to delete the desired SMS
message that show on LCD, then
LCD shows Delete?.
Press to delete
Press to cancel
or
SMS
Box1
Outbox
SMS
SMS Setup
Centre Nbr.
Send
Recei e
English
maual-Classic_ALL 14.2.2003 15:22 Stránka 15

11
1166 66
maual-Classic_ALL 14.2.2003 15:22 Stránka 16
Feature list
FEATURE LIST
●FSK + DTMF dual system caller ID
●Stores up 9 incoming calls name & number,
date & time
●Store up to 3 outgoing calls number
●Store up to 3 names & numbers in phone
book
●Timer(set time)
●NEW CALL LED indicator
●Delete individual or all records
●LCD display calling name & number
●CALL BACK function
●Real time clock(Set time)
●Message waiting function
●Out of area/Private
●Last number redial
●Pre-dial with edit
●LCD contrast adjust
●SPEAKERPHONE
●FLASH button and function
●1 one-touch 32 digits memory
SMS features
●ETSI protocol 1
●Send/receive SMS
●Four SMS boxes can be used for different pe-
ople, Box1 for public, Box2~4 can be used for
private.
●Each boxes can store at least 2 x16 charac-
ters messages or up to 99 messages. (Kept in
memory even powered off)
●Sending short messages(up to 16 charac-
ters)
●Can select destination number from phonebo-
ok or CID memory
●Inbox messages review/delete/reply/forward
●Call back to message sender
●Store message sender number to phonebook
●Fast reply function. (answer YES/NO/Call ME)
●Store last 1 send messages in outbox
●Audible Message Alert
●Ringer download