Micronics UF D5500 User manual

www.micronicsflowmeters.com
USER'S GUIDE
Installation & Operation
Instructions
Doppler Flow Meter
Model UF D5500
Manual Series A.2.1

Note: This page has been left blank intentionally.

Page 3
UF D5500 Doppler Flow Meter
INDEX
CONNECTIONS ................................................................................................................ 4
KEYPAD SYSTEM............................................................................................................ 6
CALIBRATION MENU..................................................................................................... 7
ICONS................................................................................................................................. 8
MESSAGE ICON............................................................................................................... 9
STATUS ............................................................................................................................. 9
PASSWORD..................................................................................................................... 10
MENU SELECTIONS...................................................................................................... 10
UNITS/MODE.................................................................................................................. 11
CALIBRATION................................................................................................................ 13
CALIBRATION (CONT.)................................................................................................ 14
RELAY PARAMETERS.................................................................................................. 15
DATA LOGGING ............................................................................................................ 16
COMMUNICATION (OPTIONAL)................................................................................ 18
SPECIAL FUNCTIONS................................................................................................... 20
SENSOR MOUNTING..................................................................................................... 23
ENCLOSURE INSTALLATION..................................................................................... 27
FIELD TROUBLESHOOTING ....................................................................................... 28
COMMON QUESTIONS AND ANSWERS ................................................................... 31
APPLICATIONS HOTLINE............................................................................................ 33
PRODUCT RETURN PROCEDURE .............................................................................. 33
OPTIONS.......................................................................................................................... 35
MODBUS® COMMUNICATION................................................................................... 41
HART® COMMUNICATION......................................................................................... 52
SPECIFICATIONS........................................................................................................... 68
PIPE CHARTS.................................................................................................................. 70
IMPORTANT NOTE: This instrument is manufactured and calibrated to meet product specifications.
Please read this manual carefully before installation and operation. Any unauthorized repairs or
modifications may result in a suspension of the warranty.
If this product is not used as specified by the manufacturer, protection may be impaired.
Available in Adobe Acrobat pdf format

Page 4
UF D5500 Doppler Flow Meter
CONNECTIONS:
POWER INPUT: The standard model requires AC power input between 100 to 240 VAC 50/60Hz. No
adjustments are necessary for voltages within this range. Connect L (Live) N (Neutral) and AC Ground.
Optional DC input model requires 9-32 VDC/10 Watts. Connect to + and - terminals.
Optional Thermostat and Heater modules are available rated for 115 VAC or 230 VAC.
IMPORTANT NOTE: To comply with CSA/UL electrical safety standards, AC power input and relay
connection wires must have conduit entry to the instrument enclosure. Installation requires a switch,
overcurrent fuse or circuit breaker in the building (in close proximity to the equipment) that is marked
as the disconnect switch.
Risk of electric shock. Loosen cover screw to access connections. Only qualified personnel
should access connections.
Note: Use of instrumentation over 40°C ambient requires special field wiring.
QUICK BENCH TEST:
Connect Sensor as shown on next page, then Power. Test operation of the UF D5500 by holding the
sensor in one hand and rubbing your thumb or fingers briskly across the face (plastic surface) of the
sensor. Allow 15 seconds for the UF D5500 to process the signal and display a flow value.

Page 5
UF D5500 Doppler Flow Meter
CONNECTIONS
AC
L N
NO
C
NC
NO
C
NC
–
+
4-20mA
RLY2
RLY1
NC C NO NC C NO NC C NO NC C NO
RLY3 RLY4 RLY5 RLY6
EXTRA RELAYS OPTION
POWER
INPUT
HEATER OPTION
SENSOR
GND
SERIAL COMMUNICATION OPTION
AC
GND
SENSOR
RCVR GND GND TMTR
RS-485
Output
+ G

Page 6
UF D5500 Doppler Flow Meter
KEYPAD SYSTEM
The diagram on page 7 shows the UF D5500 menu system. Arrows show the four directions to leave a
menu box. Pressing a corresponding keypad arrow will move to the next item in the direction shown.
Move the cursor (highlighted) under numerals and increase or decrease numerals with the and 
keys.
To store calibration values permanently (even through power interruptions), press the ✓button.

Page 7
UF D5500 Doppler Flow Meter
CALIBRATION MENU
--Password----------
Pas s wo r d  0000
--Messages----------
LDat a og Loggi ng
dLog Us e  0. 00000 %
Sens or Good
--Status------------
Vel oc i t y 0. 00f t / s
Fl ow 0. 00 USG/ M
Mi n Fl ow 0. 00USG/ M
Si gnal St r engt h 0%
Si gnal Cut of f  10%
--Menu--------------
Uni t s / Mode
Cal i br at i on
Rel ay Par amet er s
Dat a Loggi ng
Communi c at i on
Spec i a l Fu nc t i on s
Si mul at i on
Conf i gur at i on
OPTIONALFEATURES
- - 24 hr l og- - - - - - - - - -
Dat e Feb. 12/ 2010
5013 8 USGTot al  3 4. 82 USG/ mAv er age52. 20 USG/ mMax i mum 11: 08: 00Max Ti me
0. 000 USG/ mMi ni mum 9: 15: 00Mi n Ti me
 USG/ m
Tot 2013 0 USG
Rel ay s 1 2 3 4 5 6
0.00
*
* Menu only appears if "New Password" has been
changed from 0000 in "Special Functions" menu.
- - Dat a Lo gg i ng- - - - - - -
Log Si t e I D 0
Mode Fl ow
Fi l e For mat  . LG2
Dat e May 18/ 2018
Ti me  11: 27: 40
I n t er v a l  10s ec
Dat a Log Logg i ng
- - Rel ay Pa r a met er s - -
Rel a y  1
Func t i on Fl ow
/mOn 1000 USG
/mOf f  0. 000 USG
- - Si mul at i on- - - - - - - -
Tes t  Ac t u al
Fl ow /m 250USG
Fl ow4- 20mA  5. 60
Rel ay s 1 2 3 4 5 6
- - Conf i gur at i on- - - - -
Ser i al # 123 45
Ut i l i t y 2 0. 51. 2 .
Doppl er  1. 6. 11
CommBoar d 1. 18. 0
6Rel a y s 
Anal og Out  1
- - Communi cat i on- - - - -
Pr ot o c ol  Mo db us
Add r es s  001
BPS 96 00
Par i t y  Ev e n
St op Bi t s  1
- - Cal i br at i on- - - - - - -
Mode Fl ow
 2 0mA  500 USG/ m
 4mA 0 USG/ m
5. 00 USG/ mMi n Fl ow
Si gnal Cut of f  10%
Dampi ng 10%
Mode FI R
Per c en t  10%
Wi ndow 1. 0 f t / s
Pi pe I D 4. 03 i n
Cal Cons t ant  1. 00 0
- - Sp ec i al Fu nc t i o ns -
Language Engl i sh
Anal og Out  4- 2 0 mA
Bac k l i ght  Hi gh
Res et To t al i z er  NO
Neg. To t al s  No
Rev . Fl o w No
Capt ur e Par  No
Capt ur e WF No
Res t or e De f a u l t s No
New Pa s s wor d 00 00
- - Uni t s / Mo d e - - - - - - - -
Mode Fl ow
L i n e a r  i n
Vol u me USG
 Mul t i pl i er  x 1
Dec i mal 0s
Vel oc i t y f t / s
Fl ow USG/ m
Dec i mal 2s

Page 8
UF D5500 Doppler Flow Meter
ICONS

Page 9
UF D5500 Doppler Flow Meter
MAIN DISPLAY
The main display shows the units selected from the Units/Mode menu, flow or
velocity rate being measured, totalizer and relay states. The UF D5500 will start-
up with this display.
MESSAGE ICON
Press from the main display to view status of the data logger and error/warning
messages provided by the instrument. The Message Icon will appear on the main
display if error messages are being generated by the instrument. Press ✓to return
to the main display.
Sensor
Displays the status of the sensor hardware. Even with
the sensor disconnected or shorted, the UF D5500 will
display Good. To check sensor integrity, use the sensor
resistance test procedure on page 28. If Hardware Fault
is detected, navigate to the Configuration page in the
Main Menu to determine which circuit board is not
communicating.
STATUS
Press from the main display to view instrument status. Velocity will be
displayed in ft/sec or m/sec.
Velocity
Displays the measured flow velocity in units selected in
the Units/Mode menu.
Flow
Displays the measured flow rate in units selected in the
Units/Mode menu.
Min Flow
Displays the minimum flow rate setting. This value is
read-only. The Min Flow can be changed in the
Calibration programming menu. A measured Flow
value below the Min Flow value will display as 0 flow
on the meter’s LCD display.
Signal Strength
Displays the strength of the received Doppler signal on
a 0-100% scale.
Signal Cutoff
Displays the signal cutoff. This value is read-only. The
Signal Cutoff can be changed in the Calibration
programming menu. If Signal Strength is less than
Signal Cutoff, the meter will report 0 velocity and flow
on the LCD display. Setting may need to be adjusted in
the case of unstable flow near zero, or when high levels
of industrial noise are present.
 USG/ m
Tot 2013 0 USG
Rel ay s 1 2 3 4 5 6
0.00
--Messages----------
LDat a og Loggi ng
dLog Us e  0. 00000 %
Sens or Go od
--Status------------
Vel oc i t y  0. 00f t / s
Fl ow 0. 00 USG/ m
Mi n Fl ow 0. 00USG/ m
Si gnal St r engt h 0%
Si gnal Cut of f  10%

Page 10
UF D5500 Doppler Flow Meter
24 HR LOG
Press from the main display to view a formatted flow report from instruments
with a built-in data logger. Press to scroll down one day or repeatedly to scroll
to a specific date. Up to 365 days can be stored. Newest date will overwrite the
oldest. Press ✓to return to the main display.
IMPORTANT: Inserting a USB drive into the meter while on this screen will
transfer 24 HR Log data to the USB drive in .csv format.
PASSWORD
The Password (a number from 0000 to 9999) prevents unauthorized access to the
Calibration menu.
From the Main Display press the key to get to Password. Factory default
password is 0000 and if it has not been changed, this screen will be bypassed
completely.
A new password can be stored by going to the Special Functions New Password
menu.
If a user password is required, press to place the cursor under the first digit and
or to set the number, then to the second digit, etc. Press or ✓to proceed
to the Menu Selections screen.
MENU SELECTIONS
The Menu selections page is used to navigate to specific menus which are
described in more detail on the following pages.
Press or to navigate to different menus, and to enter the selected menu.
--Menu--------------
Uni t s / Mode
Cal i br at i on
Rel ay Par amet er s
Dat a Loggi ng
Communi c at i on
Spec i al Func t i ons
Si mul at i on
Conf i gur at i on

Page 11
UF D5500 Doppler Flow Meter
UNITS/MODE
At Mode, press the and then the or to select Flow or Velocity. Flow
mode displays the flow rate in engineering units (e.g. gpm, litres/sec, etc.) Press
the ✓to store your selection then the to the next menu item.
At Linear press the key and then the or to select your units of
measurement. The Linear units define what units the pipe dimensions and sensor
spacing will be displayed in. Typically inches or mm is selected. Press the ✓to
store your selection then the to the next menu item.
At Volume, press the and then the or to select units for volume. Note:
“bbl” denotes US oil barrels. Press the ✓to store your selection then the to the
next menu item.
At Multiplier, press the and then the or to select the totalizer multiplier.
Multipliers are used when resolution down to single digit is not required, or when
you don’t want to convert from gallons to thousands of gallons, as an example.
Press ✓to store your selection then to the next menu item.
At Decimals (Volume), press the and then the or to select the number of
decimal points to be present on the totalizer display on the LCD screen. Default =
0. Options = 0, 1, 2. Press the ✓to store your selection then the to the next
menu item.
At Velocity, press the and then the or to select the engineering units for
flow velocity. Press ✓to store your selection then to the next menu item.
- - Uni t s / Mode- - - - - - - -
Mode Fl ow
Li near  i n
Vol ume USG
 Mul t i pl i er  x 1
Dec i mal 0s
Vel oc i t y f t / s
Fl ow USG/ m
Dec i mal 2s

Page 12
UF D5500 Doppler Flow Meter
UNITS/MODE (cont.)
At Flow, press the and then the or to select the engineering units for
flow rate. Press ✓to store your selection then to the next menu item.
Available Flow Rate Engineering Units:
Abbreviation
Description
Abbreviation
Description
USG/d
US gallons per day
L/d
litres per day
USG/h
US gallons per hour
L/h
litres per hour
USG/m
US gallons per minute
L/m
litres per minute
USG/s
US gallons per second
L/s
litres per second
ft3/d
cubic feet per day
m3/d
cubic meters per day
ft3/h
cubic feet per hour
m3/h
cubic meters per hour
ft3/m
cubic feet per minute
m3/m
cubic meters per minute
ft3/s
cubic feet per second
m3/s
cubic meters per second
bbl/d
barrels per day (1 bbl = 42 USG)
IG/d
Imperial gallons per day
bbl/h
barrels per hour (1 bbl = 42 USG)
IG/d
Imperial gallons per day
bbl/m
barrels per minute (1 bbl = 42 USG)
gal)
IG/d
Imperial gallons per day
bbl/d
barrels per second (1 bbl = 42 USG)
gal)
IG/d
Imperial gallons per day
USMG/d
US million gallons per day
IMG/d
Imperial million gallons per day
USMG/h
US million gallons per hour
IMG/h
Imperial million gallons per hour
USMG/m
US million gallons per minute
IMG/m
Imperial million gallons per minute
USMG/s
US million gallons per second
IMG/s
Imperial million gallons per second
At Decimals (Flow), press the and then the or to select the number of
decimal points to be present on the flow rate display on the LCD screen. Default =
2. Options = 0, 1, 2. Press the ✓to store your selection then the to the next
menu item.
- - Uni t s / Mode- - - - - - - -
Mode Fl ow
Li near  i n
Vol ume USG
 Mul t i pl i er  x 1
Dec i mal 0s
Vel oc i t y f t / s
Fl ow USG/ m
Dec i mal 2s

Page 13
UF D5500 Doppler Flow Meter
CALIBRATION
Press or to position curser at Calibration menu, and to enter. Use or
to position cursor before each menu item and to enter. When settings are
completed press ✓to store and ✓again to return to the Main Menu.
20mA
(5V)
Press then or to change the numbers and decimal
point. Use this menu to set the corresponding flow rate
that will be represented by 20mA analog output. If
maximum flow is unknown, enter an estimated flow rate
and observe actual flow to determine the correct
maximum value. Any velocity or flow rate up to +40
ft/sec (12.2 m/sec) may be selected.
4mA
(0V)
Press or to set the flow rate corresponding to 4mA
analog output. This setting may be left at zero flow (or
velocity or can be raised to any value less than the 20mA
setting, or lowered to any velocity or corresponding flow
rate down to -40 ft/sec (-12.2 m/sec).
Min Flow
Press and enter a minimum flow cutoff. Forward and
reverse flows less than Min Flow will be forced to zero.
Signal Cutoff
Adjust the setting in percent to suppress flow readings at
zero flow when fluid swirling or pipe vibration may
cause the instrument to continue reading. Example:
Signal Cutoff at 5% will force the display and outputs to
zero when signal strength drops below 5%.
- - Cal i br at i on- - - - - - -
Mode Fl ow
 20mA  500 USG/ m
 4mA 0 USG/ m
5. 00 USG/ mMi n Fl ow
Si gnal Cut of f  10%
Dampi ng 10%
Mode FI R
Pe r c ent  10 %
Wi ndow 1. 0 f t / s
Pi pe I D 4. 03 i n
Cal Cons t ant  1. 000

Page 14
UF D5500 Doppler Flow Meter
CALIBRATION (cont.)
Damping
Mode
Choose between OFF, FIR (Default), or LOW PASS.
When measured flows are outside the Window of the
running average, the FIR filter will reduce the damping
average so that a fast response can be made to the sudden
change in flow rate.
The LOW PASS filter will ignore measured flow rates
outside the Window, while holding the running average,
until there are enough data points outside the Window to
cause a step-response to the new measured value.
While measured flows are within the Window of the
running average, both the FIR and LOW PASS filter
behave the same.
Percent
Higher percentages increase the number of measurements
which are averaged together to produce a stable flow
reading. Higher percentages also increase the time it
takes for the meter to make a step-response to the
measured flow rate outside the Window in the LOW
PASS Mode.
Window
Defines the Window around the running average, in units
of Velocity set in the Units/Mode menu. Measurements
made inside the Window are added to the running
average, and measurements outside the Window effect
the response of the meter as described in the Mode
section.
Pipe ID
Place the cursor under the digits and then or to
change the numbers and decimal point. Pipe ID should
be entered as the exact inside diameter of the pipe where
the sensor is mounted. Refer to the Pipe Charts Appendix
in this manual for inside diameter of common pipe types
and sizes.
Cal Constant
Scales the velocity reading. Factory value is close to
1.000 for a SE4-A sensor.
Press ✓to return to Menu Selections screen.
- - Cal i br at i on- - - - - - -
Mode Fl ow
 20mA  500 USG/ m
 4mA 0 USG/ m
5. 00 USG/ mMi n Fl ow
Si gnal Cut of f  10%
Dampi ng 10%
Mode FI R
Pe r c ent  10 %
Wi ndow 1. 0 f t / s
Pi pe I D 4. 03 i n
Cal Cons t ant  1. 000

Page 15
UF D5500 Doppler Flow Meter
RELAY PARAMETERS
Press or to position curser at Relay Parameters, and to enter. Use or 
to position cursor before each menu item and to enter. When settings are
completed press ✓to store and ✓again to return to the Main Menu.
Relay
Press and or to select a corresponding relay number
(2 relays are standard, 4 additional are optional).
Function
Press or to select Off, On, Pulse or Flow.
Flow
On Highlight the numerals and press or to set digits to
the required relay On set point.
Off set digits to the required Off set point.
Direction
When flow is in the positive direction, the relay will be
disengaged, when flow is negative, the relay engages.
Note: Rev. Flow in the Special Functions menu must be ON
or INVERT for this to work properly.
Pulse
Press and set digits to the flow volume increment required
between relay pulses. Use this feature for remote samplers,
chlorinators or totalizers. Minimum time between pulses is
2.25 seconds and pulse duration is 350 milliseconds.
Return to Relay and change settings for each relay number.
Press ✓to return to Menu Selections.
ON
Sets relay in energized state.
- - Rel ay Par amet er s - -
Rel ay  1
Func t i on Fl ow
/mOn 1000 USG
/mOf f  0. 000 USG

Page 16
UF D5500 Doppler Flow Meter
DATA LOGGING
Press or to position curser at Data Logging, and to enter. Use or to
position cursor before each menu item and to enter. When settings are
completed press ✓to store and ✓again to return to the Main Menu.
Log Site ID Enter a number from 00 to 99. The site ID will become part of
the downloaded file name to help distinguish downloads from
different instruments. Press ✓to store the setting.
Mode Select Velocity (e.g. ft/sec or m/sec) or Flow (e.g. USGPM or
l/sec). Press ✓to store the setting.
File Format Choose .LG2 to download data in .lg2 format for viewing on
Micronics Logger software. Choose .CSV to download data in
.csv format for import directly to Excel. This menu option can
be changed at any time without adversely affecting existing
data.
Date Press , and or to scroll and select Month, Day and
Year. Press ✓to store the setting.
Time Press , and or to select the current time in Hours,
Minutes and Seconds. Press ✓to store the setting.
Interval Press or to select the logging interval. Press ✓to store
the setting. Micronics recommends choosing an interval which
will give you as much resolution as required and no more.
Choosing too often of an interval for what is required will
result in larger data files, which may take a long time to
download to USB. Reference page 15 for specific download
times. In critical installations, data should be downloaded
often.
Data Log Stop, Start or Delete the log file. Press or to select Delete
and ✓to delete the log file. Press or to select Start and ✓
to start the logger.
Important Note: You MUST Delete an old log and Start a new log AFTER
having made changes to Log Site ID, Mode, Date, Time and/or Interval for those
changes to be applied.
Important Note: Changing any of the parameters in the Units/Mode menu will
start a new log. It is recommended that you Delete and start a new log after
changing any Units/Mode settings.
- - Dat a Loggi ng- - - - - - -
Log Si t e I D 0
Mode Fl ow
Fi l e For mat  . LG2
Dat e May 18/ 2018
Ti me 11: 27: 40
I nt er v al  1 0s e c
 60mi n
 3 0mi n
 15mi n
 10mi n
 5mi n
 2mi n
 1mi n
 3 0s ec
Dat a Log St op
 St ar t
 Del et e

Page 17
UF D5500 Doppler Flow Meter
RETRIEVING LOG FILE
Plug a USB Flash Memory Drive (one is included with the UF D5500) into the
USB output port on the Panel of the meter. The instrument display will show the
data download icon until the log file is transferred to the memory card. The USB
flash drive may be removed when the icon for download successful appears.
Download file names will appear in this format:
Tag is set according to the Log Site ID entered in the instrument Data Logging
menu.
Download letter will be A for the first download from an instrument. B for the
second, then C etc. At the letter Z a - character will appear indicating that the
maximum number of downloads for that instrument are on the USB flash drive.
Older files can be erased or moved from the flash memory drive or a new memory
drive can be used.
Note: Downloading files in .lg2 format will take approximately 35 seconds per
1% of internal log memory used.
Downloading files in .csv format will take approximately 8 minutes per 1%
of internal log memory used.
OPENING .LG2 FILES
Install Micronics Logger on your PC or laptop. Select File/Open/Instrument Log
(.log) to open the log file from your USB flash drive (not supplied by Micronics).
Data can also be converted to .CSV via Micronics Logger software.
OPENING .CSV FILES
Use a datasheet program such as Microsoft Excel® to import data in a comma
delimited format. Use Excel to manipulate or graph data.
DFM__00A. LG2
or
DFM__00A. CSV
MODEL TAG DOWNLOAD

Page 18
UF D5500 Doppler Flow Meter
COMMUNICATION (Optional)
Press or to position curser at Communication, and to enter. Use or 
to position cursor before each menu item and to enter. When settings are
completed press ✓to store and ✓again to return to the Main Menu.
MODBUS Protocol Information:
Transceiver: 2-wire, half-duplex
Data format: 8 Data Bits
Floating Point Byte Order: ABCD
Termination: Jumper JP1 selectable 120Ω resistor. TB1 & TB2 = OFF,
TB2 & TB3 = ON
Biasing: None
HART® (Highway Addressable Remote Transducer) Protocol Information:
HART Version:
7.0
Device
Description
Files:
DD files allow the user’s handheld HART communicator to
fully configure the UF D5500 Micronics provides DD files
for the Emerson 475 Communicator. The files are included in
the USB drive provided with your UF D5500 meter. You may
also request the files from Micronics by calling or emailing
us at [e-mail]. Warning: The UF D5500
and associated DDs are pending certification from the
Fieldcomm Group.
Connections:
HART Protocol uses a digital signal superimposed on the 4-
20mA output. When the 4-20mA output of the UF D5500 is
connected with a load resistor (230Ωto 600Ω), the HART
communicator can be connected on the loop in order to
communicate.
Protocol
Choose MODBUS or HART.
Address
(Modbus)
Device address for the UF D5500. Valid range: 001-247
(Default: 001). This number should be unique across the bus.
Press or to scroll, to select digits, and press ✓to
store the setting.

Page 19
UF D5500 Doppler Flow Meter
COMMUNICATION (Optional) cont.
BPS
(Modbus)
Baud rate for the MODBUS communications. Press or 
to select, and ✓to store the setting. Options: 4800, 9600,
19200, 38400, 57600, 76800, and 115200 (Default: 9600).
Parity
(Modbus)
Error checking parity for the MODBUS communications.
Press or to select, and ✓to store the setting. Options:
None, Even, and Odd (Default: Even).
Stop Bits
(Modbus)
Press or to select, and ✓to store the setting. Options: 1
or 2 (Default: 1).

Page 20
UF D5500 Doppler Flow Meter
SPECIAL FUNCTIONS
Language
Select English, French or Spanish
Analog Out
Select 4-20mA or 0-5V mode for the analog
output.
Backlight
Select High, Medium or Low for continuous
backlight.
Select Key Hi/Lo for high backlight for 1 minute
after a keypress and then Lo backlight until a key is
pressed again.
Select Key High, Med or Low for backlight for
1 minute after a keypress and then backlight off
until a key is pressed again.
Reset Totalizer
Press and select Yes to erase and restart the
totalizer at zero.
Neg. Totals
Select Yes to have reverse flow readings
deducted from the totalizer. Select No to totalize
forward flow only and ignore reverse flow.
Rev. Flo
Select On to enable flow direction measurement.
Select Off to disable flow direction
measurement. Select Invert to invert the sense of
the flow measurement.
Capture Par
This function captures the programming
parameters in the meter. Select Yes, wait for Insrt
USB to appear, then insert a USB drive into the
USB port to transfer the parameters. After Saving
flashes, Done will appear on the screen, meaning it
is safe to remove the USB.
- - Sp ec i al Func t i ons -
Language Engl i sh
Anal og Out  4- 20mA
Bac kl i ght  Hi gh
Re s et Tot al i z er  NO
Ne g. Tot al s  No
Re v . Fl ow No
Capt ur e Par  No
Capt ur e WF No
Res t or e Def aul t s No
Ne w Pas s wor d  0000