Midea AC200-17JR User manual

ELECTRIC FAN
OWNER’S MANUAL
AIR COOLER
MODEL:AC200-17JR
READ AND SAVE THESE INSTRUCTIONS
Attention: Pictures in the IM are for reference only.
GD Midea Environment Appliances MFG.Co.,Ltd.
No.28, Dong Fu Road, Hesui East Industrial Area, Dong Feng Town,
Zhongshan, Guangdong 528425 P.R.China

1. If the supply cord is damaged, it must be replaced by manufacturer
or its service agent or a similarly qualified person in order to avoid a
hazard.
2. Household Indoor use only.
3. This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given
supervisionor instruction concerning use of the appliance by a
person responsiblefor their safety.Young children should be
supervised to ensure that they do not play with the appliance.
4. Unplug the appliance during filling and cleaning.
5. Prior to cleaning or other maintenance, the appliance must be
disconnected from the supply mains.
6.
SAFETY INSTRUCTION
Correct Disposal of this product
This marking indicates that this product should not be
disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection systems
or contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
1

INSTALLATION INSTRUCTIONS
Name of components
Front Foot-wheel
Rear Foot-wheel
Foot-Wheel Installation
Water tank
Air outlet
Control panel
Water window
Wheel
Installation of the water tank:
Ice box
Water tank fastener
Take out the water
tank cover from the
fan body
Fix the cover
on the water
tank
2

INSTRUCTIONS FOR USE
Instructions for key of remote controller
Considerate Hint:
1. Effective Range of Remote Control: within 5m distance and
30-degree deflection in front of Product.
3
Battery Installation
Locking latch
Pull Notch

Press a key on the unit to activate a corresponding function.
For instance:
● Press [OSC.] Key to activate or deactivate Swing Function. (Note:
Manual horizontal blade allows tilting flow direction.)
● Press [SPEED] Key to adjust 3 speeds of air flow.
● Press [STYLE] Key to switch between Normal, Natural and Sleep
Functions.
● Press [TIMER] Key to set 1-12 hour timer setting.
● When [EVA./COOLER] Key is pressed, the indicator lights
up constantly if the operation is normal; when the indicator flashes, it
denotes a water shortage, please add water immediately.
Considerate Hint:
Push Buttons on the unit may differ based on the actual product model.
Instructions for operation of body
4

Considerate Hint:
● When humidifying, water level in the Water Tank must remain under MAX
indication; replenish water if level gets lower than MIN indication.
● The water level in the tank is below minimum scale marked on water
display window, don’t use the humidification function.
● When the tank water level is lower than the minimum scale, the unit shall
make 3 seconds buzzing warnings sound, then the water pump stop running,
this time need add water to run humidification function.
● When the tank water level exceed the maximum, the unit shall make 10
seconds buzzing warnings sound, to prevent the water in a water flooded
lead to overflow
fill water from top
water tank
fill water from bottom
water tank
filter frame
ADD WATER
Add water from top: Rotate water tank's top cover, fill in water.
Add water from side: Rotate water tank's side cover, fill in water.
Put the ice box
into water tank
Ice box
5

TROUBLESHOOTING
In case the product cannot be operated normally after installation, checks shall
be made for items described bellow:
1. Power cable unplugged or faulty contact.
2. Honeycomb filter assembly not properly installed.
3. Power Switch on the back of product or in the display panel not switched
on.
If product remains dysfunctional after checking, a local dealer shall be sought for
assistance.
MAINTENANCE
Never clean the product with
any abrasive tool or solvent.
Clean with detergent and wipe
dry with cloth immediately.
Never dismantle the product
or attempt to make any
modification. Regular check
and cleaning of the product is
recommended for prolonging
its lifespan.
Make sure power supply is
disconnected before cleaning
the product.
Never wash the unit in water.
For cleaning, remove
components (water tank,
honeycomb filter, etc.) and
clean them with water and soft
brush. Allow them to air-dry
before re-assembling.
TROUBLESHOOTING
In case the product cannot be operated normally after installation, checks shall
be made for items described bellow:
1. Power cable unplugged or faulty contact.
2. Honeycomb filter assembly not properly installed.
3. Power Switch on the back of product or in the display panel not switched
on.
If product remains dysfunctional after checking, a local dealer shall be sought for
assistance.
6