Midea MD-6288 User manual

Tumble Dryer
OWNER’S MANUAL
Before using your tumble dryer, please read this
manual carefully and keep it for future reference.
Inside you will find many helpful hints on how to use
and maintain your tumble dryer properly. Just a little
preventative care on your part can save you a great
deal of time and money over the life of your tumble
dryer. You’ll find many answers to common problems
in the chart of troubleshooting tips. If you review the
chart of troubleshooting tips first, you may not need
to call for service.
Read This Manual
Caution, the surface is hot !
MD-6288

Safety reset
Safety information
Simple installation
Control panel
Operation explanation
Safety information
Safety information
Other functions description and Technical Specifications

7.Flex tube
22) The appliance should not be overturned during normal use or maintenance.
23) Remove all objects from pockets such as lighters and matches.
Correct Disposal of this product:
This marking indicates that this product should not be
disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of
material resources. To return your used device, please
use the return and collection systems or contact the
retailer where the product was purchased. They can
take this product for environmental safe recycling.
Never stop a tumble dryer before the end of the drying cycle unless all items
are quickly removed and spread out so that the heat is dissipated.
Safety information

Control panel
Control panel

Operation explanation Operation explanation
Clothing
Type
Customer
Requires
Spin speed in
Tumble Washing
Machine(rpm)
Approximate
amount of
remaining
humidity
Capacity
(KG) Programs Heating Mode Note
Cotton
Fiber
Delicates
1000-1200
800-1000
800-1000
800
600
600
60%
70%
70%
40%
50%
50%
6
3
1
6
3
1
6
3
6
3
1
6
3
1
1
Middle
Middle
Middle
Extra
Middle
Middle
Light
1Hr
Light
Light
Light
Light
Light
Light
Light
Full
Full
Full
Full
Full
Full
Full
Full
Full
Half
Half
Full
Full
Full
Full
Please
according
to the
Type and
Capacity
of the
clothing
to select
the most
suitable
Program
and
Heating
Mode.
Wear
( )
Wear
( )
Ironr
( )
Wear ( )
5.When it is used in the environment of high temperature and humidity ,
please select Extra Dry and Full heating for drying.
If Crease Guard option is selected, the anti-crease process will
enlarge to 2 hours, otherwise it keeps 30min without this option.
1. Cold wind function means there is only cold wind for circulating before
finishing heating 3 minutes.(Except 1hour program which runs 10
minutes cold wind.)

Cleaning and routine maintenance Safety reset
Safety reset
1. These dryers have a safety cut out switch which is activated by
temperature.
2. The safety reset button is on the backboard. If your dryer not heating
this button must be reset before the dryer will operate again. You may
need to wait 10 minutes for cooling to occur.
3. The most common reason for the dryer to overheat is a blocked filter.
Clean the line filter after each load to prevent overheating of the dryer.
It will only be necessary to press the safety reset button if the dryer
not heating. Allow the dryer at least 10 minutes to cool down before
pressing the button .Press the white button in until you feel the reset
click. Cleaning the filter after each load will avoid repetitive operation
of the safety cut out switch.
The cut out switch may operate for the following reason:
1. Lint filter is blocked.
2. Exhaust outlets blocked at the back of the dryer.
3. Poor ventilation in the laundry or room-open a window or door
4. Lightweight garment eg. handkerchief, sucked over the filter.
Safety Reset Button
Use your finger or a pencil to press the button in until you feel
it click.

Precautions
240
Indication of fault Cause of fault Phenomenon
of fault
Alarm of the
buzzing sound Solution of alarm
Alarm for
temperature
exceed
The machine
temperature is
too high.
"
indicator flash
Airing"
The buzzer goes
on buzzing sound
for 10 seconds.
If the alarm does
not be solved ,
every 16 minutes
re-buzzs for
10 seconds.
Power off wait the
heating tempera-
ture fall then start
Alarm for
the door open
Open the door
after program
start
"Half" indication
flash
Close the door
solve alarm,reat-
art the program.
Alarm for
malfunction of
temperature
sensor
"Half+Airing"
indication flash
Temperature
sensor open
Power off check
themachine start
it when in normal
Temperature
sensor short
"Full"
indication flash
Other functions description
Other functions description and Technical Specifications
Technical Specifications