Miele DG 155 User manual

Installation instructions
Steam oven
DG 155
DG 155-1
DG 155-2
DG 155-3
To prevent accidents and
machine damage,
read these instructions
before installation or use.
UV
M.-Nr. 05 229 051

IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Appliance and cut out dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installation in tall cabinetry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installation under a counter top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installation above a Miele oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installin the oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Securing the oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Contents
2

,WARNING - Read all
instructions before installation or
use of the steam oven to prevent
injury and machine dama e.
Before installation make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
Installation, repair and
maintenance work should be by a
Miele authorized service technician.
Work by unqualified persons could be
dangerous and may void the warranty.
Before installation or service,
disconnect the power supply to the
work area by removing the fuse,
"tripping" the circuit breaker, or
switching off the power main. Ensure
that the power is not restored to the
appliance during maintenance or repair
work.
Do not use an extension cord to
connect this appliance to
electricity. Extension cords do not
guarantee the required safety of the
appliance, (e.g. danger of overheating).
Do not operate any appliance with
a damaged cord or plug or after
the appliance has been damaged in
any manner. Return the appliance to
the nearest authorized service facility
for examination, repair or adjustment.
Inspect the steam oven for
shipping damage. Do not install or
operate a damaged unit. Contact the
place of purchase.
The steam oven should be installed
at a safe height for users to safely
access all cooking levels and
containers.
This equipment is not designed for
maritime use or for use in mobile
installations such as caravans or
aircraft. However, under certain
conditions it may be possible for an
installation in these applications. Please
contact the nearest Miele dealer or the
Miele Technical Service Department
with specific requirements.
This steam oven is designed for
installation in cabinetry or beneath
a counter top. This is necessary to
ensure that all electrical components
are shielded.
Be certain your appliance is
properly installed and grounded by
a qualified technician. To guarantee the
electrical safety of this appliance,
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician. The manufacturer cannot be
held responsible for damage caused
by the lack, or inadequacy of, an
effective grounding system.
Do not tamper with electrical
connections and components or
mechanical parts. Never open the outer
casing of the appliance.
IMPORTANT SAFETY INSTRUCTIONS
3

Disposal of an old appliance
Before discarding an old
appliance, disconnect it from the
electricity supply, cut off the power cord
and remove any doors to prevent
hazards.
Note to the installer:
Please leave these instructions with the
consumer of the appliance.
Important -
Save these instructions for the local
electrical inspector’s use
IMPORTANT SAFETY INSTRUCTIONS
4

Installation in tall cabinetry
aSteam oven
bCabinet opening
cTerminal block
dOutlet or junction box.
This should be accessible after the appliance has been installed.
ePower supply cord
Appliance and cut out dimensions
5
b
c
df
e
23
17
13
"
13
"
78
"
916
"
21
22 22
58
"
716
"
17
11
16
"
116
"
17
15
16
"
23
13
"
916
"
(456mm)
(45 mm)
(595mm)
(56 -568mm)
(33 mm)
(22mm)
(min.33 )
(547mm)
(447mm)
(1 mm)
15 16
"
3
38
"
-
17
13
"
78
"
21
22 22
58
"
716
"
17
11
16
"

Installation under a counter top
aSteam oven
bCabinet opening
cTerminal block
dOutlet or junction box.
This should be accessible after the appliance has been installed.
ePower supply cord
Appliance and cut out dimensions
6
c
df
b
e
(min.37 )
(456mm)
(595mm)
(56 -568mm)
(447mm)
17
58
"
716
"
23
916
"
21
17
15
16
"
916
"
(547mm)
916
"
14
(33 mm)
(22mm)
13
"
78
"
21
116
"
38
"
-
22 22
(45 mm)
17
11
16
"

Installation above a Miele oven
aSteam oven
bCabinet opening
cTerminal block
dOutlet or junction box.
This should be accessible after the appliance has been installed.
ePower supply cord
gOven
Note:
The steam oven must not rest directly on top of the oven. The steam oven
should be supported by a shelf or ledges.
Appliance and cut out dimensions
7
(55 mm)
b
g
c
c
de
f
17
13
"
13
"
78
"
78
"
9
9
16
16
"
"
58
"
9
9
16
16
"
"
(45 mm)
(593-595mm)
(56 -568mm)
(56 -568mm)
(33 mm)
(22mm)
(22mm)
(min.33 )
(56 mm)
(547mm)
(447mm)
(58 mm)
(1 mm)
15 16
"
3
17
78
"
78
"
58
"
21
21
116
"
38
"
-
22 22
116
"
38
"
-
22 22
116
"
22
58
"
22
1316
"
17
15
16
"
23
7
16
"
23
23
(456mm)
(596mm)
(595mm)
716
"
716
"
17
11
16
"
23 - 23
7
3
16
8
"
21

Securin the oven
After aligning the oven it must be
secured in position.
Open the oven door and using the
supplied screws g, secure it to the
cabinet through the holes on either side
of the vertical oven trim.
Installin the oven
8

Electrical connection
,WARNING:
Disconnect main power supply
before servicing. To reduce the risk
of electrical shock, make sure that
the appliance is properly grounded
after installation.
All electrical work should be performed
by a licensed electrician, in strict
accordance with national and local
safety regulations and standards.
–Note to installer:
Please leave these instructions with
the consumer.
– Power supply:
Please check the data plate:
240 VAC; 60 Hz
15A, 240 V
L1, L2, Ground
Make sure your electrical supply
matches the data plate.
WARNING : THIS APPLIANCE
MUST BE GROUNDED
For USA only
The appliance is provided with 3
terminal leads: 1 black wire (L1), 1 red
wire (L 2) and 1 green wire (GND) that
must be connected to a dedicated
junction box. Connect the black wire to
L1, the red wire to L2 and the green
wire to GND.
ALSO SEE THE WIRING DIAGRAM
PROVIDED WITH THE APPLIANCE.
For CDN only
The appliance is provided with 3
terminal leads: 1 black wire (L1), 1 red
wire (L 2) and 1 green wire (GND) that
must be connected to a dedicated
junction box. Connect the black wire to
L1, the red wire to L2 and the green
wire to GND.
All hot wires (black and red) must be
fused individually before connecting
them to the main power supply leads.
Use 15 Amp fuses or circuit
breakers for appliances rated 240
VAC.
ALSO SEE THE WIRING DIAGRAM
PROVIDED WITH THE APPLIANCE.
Installin the oven
9

10

11

M.-Nr. 05 229 051 / 00
Alteration rights reserved / 1204
This paper has been bleached without the use of chlorine.