Miele SKCE0 User manual

en Operating Instructions Canister Vacuum Cleaner
fr Mode d'emploi Aspirateur-chariot
es Instrucciones de funcionamiento de la aspiradora
SKCE0
M.-Nr. 10 835 010
HS16

2
en ....................................................................................................................... 4
fr ......................................................................................................................... 26
es ........................................................................................................................ 53

en - Contents
3
IMPORTANT SAFETY INSTRUCTIONS ................................................................ 4
Appliance description ......................................................................................... 10
Caring for the environment ................................................................................ 12
References to illustrations.................................................................................. 13
Electrobrush operating instructions.................................................................. 13
Preparing for use................................................................................................. 13
Use........................................................................................................................ 15
Parking, transport and storage .......................................................................... 16
Maintenance ........................................................................................................ 17
Emptying the dust container ................................................................................ 17
Cleaning the dust container .................................................................................. 17
Cleaning the filter frame ....................................................................................... 17
Cleaning the fine dust filter.................................................................................... 18
Starting the ComfortClean self-cleaning function manually................................. 18
When to change the thread catchers? .................................................................. 18
How to replace the thread lifters .......................................................................... 18
Cleaning the roller on the AllTeQ floorhead .......................................................... 18
Cleaning and care ............................................................................................... 19
Frequently Asked Questions .............................................................................. 20
Frequently asked questions ............................................................................... 21
Cleaning the pre-filter........................................................................................... 21
Cleaning the fine dust filter manually ................................................................... 21
Technical Service................................................................................................. 21
Contact in case of fault ......................................................................................... 21
Warranty ................................................................................................................ 22
Optional accessories .......................................................................................... 22
Limited Warranty - Vacuum Cleaners USA ....................................................... 24

en - IMPORTANT SAFETY INSTRUCTIONS
4
READ ALL INSTRUCTIONS BEFORE USING THIS AP-
PLIANCE
This vacuum cleaner complies with current safety re-
quirements. Inappropriate use can, however, lead to per-
sonal injury and damage to property.
To avoid the risk of accidents and damage to the vacuum
cleaner, please read the operating instructions carefully
before using it for the first time. They contain important
information on its safety, operation and maintenance.
Keep these operating instructions in a safe place and
pass them on to any future user.
Always disconnect the vacuum cleaner from the power
supply when you have finished using it, before changing
any accessories, as well as for maintenance work and
cleaning. Turn the vacuum cleaner off and unplug it.
Correct use
 This vacuum cleaner is intended for cleaning flooring in
domestic households and similar residential environments.
 This vacuum cleaner can be used for all normal cleaning
of carpets, rugs and hard flooring.
 This vacuum cleaner is not intended for outdoor use.
 The vacuum cleaner must only be used to vacuum dry
floor surfaces. Do not use on people and animals. Any
other usage, modification or alteration is not supported by
the manufacturer and could be dangerous.

en - IMPORTANT SAFETY INSTRUCTIONS
5
 Persons which lack physical, sensory or mental abilities
or experience with the machine should not use it without
supervision or instruction by a responsible person.
Safety with children
 Danger of suffocation! Ensure that any plastic wrap-
pings, bags, etc. are disposed of safely and kept out of the
reach of children.
 Do not allow the vacuum cleaner to be used as a toy.
Close attention is necessary when used near children.
WARNING
To reduce the risk of fire, electric shock or injury:
 Check the voltage rating of the vacuum cleaner before
connecting the power cord to an electrical outlet. Your
power source should correspond with the voltage rating
plate located on the underside of the vacuum. Use only
household AC outlets. Never use DC power sources. If you
are not sure of your home’s voltage supply, consult a qual-
ified electrician. Connecting the vacuum cleaner to a
higher voltage than indicated in these instructions may re-
sult in damage to the vacuum cleaner or injury.
 To reduce the risk of electric shock, this appliance has a
polarized plug (one blade is wider than the other.) This plug
will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the proper out-
let. Do not alter the plug in any way.

en - IMPORTANT SAFETY INSTRUCTIONS
6
Technical safety
 Before using the vacuum cleaner and its accessories,
check for any visible signs of damage. Do not use a dam-
aged appliance.
 Ensure that the connection data on the data plate of the
vacuum cleaner (voltage and frequency) match the house-
hold power supply. Without modifications, the vacuum
cleaner is suited for 50Hz or 60Hz.
 The electrical outlet must be fitted with a 15 A fuse.
 Reliable and safe operation of this vacuum cleaner can
only be assured if it has been connected to the electricity
supply.
 The socket on the vacuum cleaner must only be used
for the Miele Electrobrushes listed in these operating in-
structions.
 The Miele Powerbrush is a motor driven accessory for
use only with Miele vacuum cleaners. For safety reasons,
the vacuum cleaner must not be used with an Powerbrush
produced by another manufacturer.
 Repairs must only be performed by an authorized ser-
vice agent in accordance with national and local safety
regulations. Unauthorized repairs could cause injury or ma-
chine damage. Otherwise the warranty will be void.

en - IMPORTANT SAFETY INSTRUCTIONS
7
 Do not pull or carry the vacuum cleaner by the power
cord, and be careful not to damage the cord when with-
drawing the plug from the socket. Keep the cord away
from sharp edges and do not let it get pinched, for exam-
ple, under a door. Avoid running the vacuum cleaner over
the cord. This could damage the cord, plug or socket. The
appliance must not be used if any of these have suffered
damage.
 Do not use the vacuum cleaner if the power cord is
damaged. If the power cord is damaged it must be re-
placed together with the cord reel. For safety reasons this
must only be done by Miele Technical Service or a Miele
authorized service technician.
 When vacuuming, in particular fine dust, e.g. sawdust,
sand, plaster, flour, talcum powder etc., electrostatic
charges build up naturally. Under certain conditions these
charges will be released. To avoid the unpleasant effects of
these discharges, a metal inlay has been incorporated into
the underside of the handle. Please make sure that you
keep your hand in constant contact with this metal strip
during vacuuming.
 Repairs should only be carried out by a Miele-authorized
service technician. Repairs and other work by unqualified
persons can cause considerable danger to users.
 Defective components should be replaced by Miele orig-
inal parts only. Only with these parts can the manufacturer
guarantee the safety of the appliance.

en - IMPORTANT SAFETY INSTRUCTIONS
8
Cleaning
 Do not let the vacuum cleaner, the Electrobrush, the
telescopic wand and the suction hose get wet.
 The Electrobrush, telescopic wand and suction hose
contain electrical wires. The plug connectors must not
come into contact with water - damp cleaning of these
items is therefore not permitted.
 Clean only with a dry cloth or slightly damp cloth when
disconnected from the power supply. Exception:
– Dust container / fine dust container: only clean these
parts with water and a small amount of liquid dish soap,
then dry carefully.
– Fine dust filter: do not clean the inside of the fine dust
filter. Rinse the outside under running cold water. Do not
use soap. Do not use any sharp or pointed objects and
do not brush the fine dust filter. After cleaning, leave the
fine dust filter to dry for a minimum of 24hours before
placing it back in the fine dust container.
– Pre-filter / filter frame: clean these parts under running
cold water. Do not use soap. Do not use any sharp or
pointed objects. Dry these parts carefully after cleaning.
Proper use
 Do not use the vacuum cleaner without the dust con-
tainer, pre-filter, fine dust container and fine dust filter fit-
ted.

en - IMPORTANT SAFETY INSTRUCTIONS
9
 Do not vacuum up anything which has been burning or
smoking, e.g., cigarettes, ashes or hot ash, whether glow-
ing or apparently extinguished.
 Do not use the vacuum cleaner to vacuum up any water,
liquid or damp dirt. Wait until any freshly cleaned or sham-
pooed rugs or carpets are completely dry before attempt-
ing to vacuum.
 Do not use the vacuum cleaner to vacuum toner dust.
Toner, such as that used in printers and photocopiers, can
conduct electricity.
 Do not vacuum up any flammable or combustible liquids
or gases and do not vacuum in areas where such sub-
stances are stored.
 Do not vacuum at head height and do not let the suction
get anywhere near a person's head.
Accessories
 To avoid the risk of injury when vacuuming with a Miele
Powerbrush or Turbobrush, do not touch the rotating roller
brush.
 It is not advisable to vacuum directly with the handle,
i.e., without an accessory attached, as the rim could get
damaged and you could hurt yourself on sharp edges.
 Only use accessories with the "ORIGINAL Miele" logo
on them. Otherwise the manufacturer cannot guarantee the
safety of the product.
SAVE THESE INSTRUCTIONS

en - Appliance description
10

en - Appliance description
11
aSES 121 Suction hose
bVacuum cleaner carrying handle
cFoot switch for cable rewind
dComfortClean button
ePower cord
fUpholstery nozzle
gFine dust container with fine dust filter
hWheels
iCrevice nozzle
jPark system for pauses during vacuuming
kSuction power selector
lOn/off  foot switch
mDust container carrying handle
nFilter frame
oDust container
pPre-filter
qPre-filter handle
rDust container release mechanism
sElectrobrush (either SEB 217 / EB02, SEB 228 / EB03 or SEB 236 / EB01, de-
pending on model)
tRelease buttons
uSET 220 telescopic wand
vTelescopic suction wand release button
wElectrobrush On/Off button
xComfort handle
Underneath - Park system for storage (not shown)

en - Caring for the environment
12
Disposal of the packing mate-
rial
The cardboard box and packing materi-
als protect the appliance during ship-
ping. They have been designed to be
biodegradable and recyclable.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children. Dan-
ger of suffocation!
Disposal of your old appliance
Before disposing of your old appliance,
remove the fine dust filter and dispose
of it with your household waste.
Electrical and electronic appliances
contain valuable materials. They also
contain certain substances, compounds
and components which are essential for
the proper functioning and safe use of
the equipment. Handling these materi-
als improperly by disposing of them in
your household waste can be harmful to
your health and the environment. There-
fore, please do not dispose of your old
appliance with your regular household
waste.
Instead, use the official collection and
disposal points provided by local au-
thorities, dealers or Miele, in order to
dispose of and recycle electrical and
electronic appliances. You are legally
responsible for deleting any personal
data on the old appliance you wish to
dispose of. Please ensure that your old
appliance is kept away from children
until removal.

en-US
13
References to illustrations
The illustrations referred to in the text
are shown on the fold-out pages at
the end of these Operating Instruc-
tions.
Electrobrush operating instruc-
tions
Your vacuum cleaner is equipped with
an Electrobrush as standard. Please
read the separate operating instructions
supplied with the Electrobrush before
using it for the first time.
Preparing for use
Attaching the suction hose (Fig. 01)
Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into position.
Disconnecting the suction hose
(Fig. 02)
Press the release buttons at the side
of the hose connector, and lift the
hose from the socket.
Connect the Comfort handle to the
telescopic wand (Fig. 03)
Insert the Comfort handle into the
telescopic wand until it clicks into po-
sition.
Press the release button to separate
the individual sections from each
other.
Adjusting the telescopic wand
(Fig. 04)
One part of the telescopic wand is fitted
inside the other so that the tube can be
adjusted to suit your preferred height
for comfortable vacuuming, the maxi-
mum height, however, is until the end
stop.
Press the release button and adjust
the telescopic wand to the desired
height.
Connecting the telescopic wand to
the Electrobrush (Fig. 05)
Insert the telescopic wand into the
Electrobrush until it clicks into posi-
tion.
Using the Electrobrush
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following Electrobrushes.
– Electrobrush SEB 217
– Electrobrush SEB 228
– Electrobrush SEB 236
The Electrobrush is particularly suitable
for the intensive vacuuming of carpets
which are subject to hard wear.
Please note that the Electrobrush
should not be used to vacuum deep-
pile rugs and carpets or valuable
hand-knotted rugs and carpets, e.g.,
Persian and oriental rugs, etc. or long
piled rugs and carpets. There is a
risk of the threads being pulled out.

en-US
14
Do not use the Electrobrush SEB
217 Electro to clean highly variable
or uneven floors. The base plate
might come into contact with the
floor and cause damage.
For further information on use and
maintenance please refer to the sepa-
rate instructions supplied with the Elec-
trobrush.
Connecting the telescopic wand to
the floorhead/floorbrush (Fig. 06)
(included as standard depending on
model)
Push the telescopic wand into the
suction nozzle and turn it clockwise
or counter-clockwise until it clicks
into position.
To detach these parts from each
other, press the release button and
pull the telescopic wand out of the
suction nozzle, twisting it slightly as
you do so.
Using the reversible floorhead
(Fig. 07)
(included as standard depending on
model)
Please be sure to observe the floor-
ing manufacturer's cleaning and care
instructions.
The floorhead can be used for vacuum-
cleaning carpets and rugs. It is espe-
cially suitable for cleaning hard flooring
which is not susceptible to scratching.
Adjusting the floor head (Fig. 07)
Vacuum carpets and rugs with the
brush retracted:
Press the foot switch  .
Clean hard flooring which is not sus-
ceptible to scratching, and flooring with
gaps or deep crevices in it with the
brush protruding:
Press the foot switch  .
Using the accessories supplied
(Fig. 08)
Crevice nozzle
For cleaning in folds, crevices or
corners.
Upholstery nozzle
For cleaning upholstery, mat-
tresses, cushions, curtains, cov-
ers, etc.
Dusting brush with natural bris-
tles,
included in loose form
For cleaning base boards as well
as ornate, carved and particularly
sensitive objects. The head can be
swiveled to adjust to the best an-
gle.
The crevice nozzle and the upholstery
nozzle are located in holders at the rear
of the vacuum cleaner.
Reversible floorhead (Fig. 09)
(included as standard depending on
model)
For general use and also for vacuuming
the stairs.
For safety reasons when vacu-
uming stairs, it is best to start at the
bottom of the stairs and move up-
wards.

en-US
15
Floorbrush Parquet Twister with
swiveling head (SBB 300-3)
(included as standard depending on
model)
This brush is suitable for a variety of
hard floor surfaces and has a swivel
joint enabling it to get into awkward
corners.
Floorbrush Parquet Twister XL with
swiveling head (SBB 400-3)
(included as standard depending on
model)
With natural bristles for quickly vacu-
uming smooth hard floors and small
gaps.
Use
Power cord
Unwind the cord completely to
aid the vacuum in dissipating heat.
Do not pull or carry by the cord, use
the cord as a handle, close a door on
the cord, or pull the cord around
sharp edges or corners. Do not run
the appliance over the cord. Keep
the cord away from heated surfaces.
Do not unplug by pulling the cord. To
unplug grasp the plug, not the cord.
This appliance is equipped with a
power cord reel. Hold the plug when
rewinding onto cord reel. Do not al-
low plug to whip when rewinding.
Unwind the power cord (Fig. 10)
Pull the power cord out to the re-
quired length (max. cord length ap-
prox. 21 ft / 6.5 m).
Insert the plug into the electrical
socket.
If vacuuming for longer than 30
minutes, the power cord must be
pulled out all the way. Otherwise
there is a danger of overheating and
damage.
Rewinding the power cord (Fig. 11)
Unplug the power cord from the
socket.
Step on the cord rewind foot switch.
The power cord will then retract itself
into the vacuum cleaner.
If you do not want the cord to retract
completely into the vacuum cleaner
you can deactivate this function. To do
this, take hold of the end of the cord
while rewinding it and give it a short
pull when you want the rewinding to
end.
Turning the vacuum cleaner on and
off (Fig. 12)
Press the On/Off foot control .
Selecting the suction power
The suction power can be adjusted to
suit the type of flooring being cleaned.
Reducing the power lowers the amount
of effort required to maneuver the floor
brush.
The vacuum cleaner has symbols on
the controls which indicate the type of
use the settings are suitable for.

en-US
16
Curtains, lightweight fabric
Deep pile carpets, rugs and run-
ners
Low pile carpet and rugs
Hard flooring and heavily soiled
carpets and rugs (also for clean-
ing upholstery and mattresses
with the upholstery nozzle)
If the suction seems too high when us-
ing the Electrobrush/floorhead, reduce
the suction until the Electrobrush/
floorhead is easier to maneuver.
Rotary dial (Fig. 13)
Turn the rotary selector to the suction
power setting you require.
During vacuuming
When vacuuming, pull the vacuum
cleaner behind you on its wheels. You
can stand it upright for vacuuming
stairs and curtains, etc.
When vacuuming, in particular
fine dust, e.g. dust, sand, plaster,
flour, etc., electrostatic charges build
up naturally. Under certain conditions
these charges will be released. To
avoid the unpleasant effects of these
discharges, a metal inlay has been
incorporated into the underside of
the handle. Please make sure that
you keep your hand in constant con-
tact with this metal strip during vacu-
uming (Fig. 14).
If a large amount of dust is vacuumed
at once, the ComfortClean self-cleaning
function should be started manually ei-
ther during a vacuuming pause or
straight away. This enables the vacuum
cleaner to achieve the very best clean-
ing performance again straight away
(see "Maintenance - Starting the Com-
fortClean self-cleaning function manu-
ally").
Switching the Powerbrush on and off
(Fig. 15)
To use the Electrobrush, it has to be
switched on additionally to the vacuum
cleaner.
To do this, press the On/Off button 
on the Comfort handle.
This means that you can switch the
Electrobrush off during vacuuming and
the vacuum cleaner will continue to op-
erate using suction only, e.g. when
moving from vacuuming a fitted carpet
to a high quality rug, for example.
Parking, transport and storage
Park system for pauses during vacu-
uming (Fig. 16)
(cannot be used with the Electrobrush
SEB 236)
The park system allows you to conve-
niently park the suction wand and floor-
head during pauses.
Slot the floorhead into the parking at-
tachment on the vacuum cleaner.
If your vacuum cleaner is on a slop-
ing surface, e.g., a ramp, retract the
telescopic suction wand fully.

en-US
17
Park system for storage (Fig. 17)
Always disconnect the vacuum
cleaner from the power supply when
you have finished using it. Remove
the plug from the socket.
Stand the vacuum cleaner upright.
It is a good idea to retract the tele-
scopic suction wand fully.
Slot the floorhead downwards into
one of the parking attachments on ei-
ther side of the vacuum cleaner (the
parking attachments cannot be used
with Electrobrushes SEB 228 and
SEB 236).
This makes the vacuum cleaner easier
to carry or store.
For safety reasons, do not lift the
vacuum cleaner using the dust con-
tainer carrying handle.
Maintenance
Always switch off the vacuum
cleaner for maintenance work and
unplug the power cord from the wall
socket.
Emptying the dust
container(Figs. 18 - 23)
Empty the dust container before the
dust has reached the max marking
on the dust container.
Pull the dust container handle up-
ward.
Remove the dust container upward.
The contents of the dust container can
be disposed of with the normal house-
hold trash, providing it contains gen-
eral household dust only.
Hold the dust container close to the
bin so that as little dust billows out as
possible.
Press the yellow release button on
the bottom of the dust container.
The flap will open and the dust will fall
out.
Close the flap so that it clicks audibly.
Insert the dust container down into
the vacuum cleaner so that it audibly
clicks into place.
Push the handle down.
Cleaning the dust container
Clean the dust container as required.
Clean the dust container using water
and liquid dish soap.
Dry the dust container carefully.
Cleaning the filter
frame(Figs. 24 + 25)
A removable filter frame is located in the
dust container. This should be cleaned
if it is obviously dirty.
Place the emptied and open dust
container on its front.
Release the filter frame and remove it.
Empty the filter frame and rinse it un-
der cold running water.

en-US
18
Do not use detergent!
Do not use any sharp or pointed ob-
jects!
Dry the filter frame carefully!
Place the dry filter frame in the dust
container so that it audibly clicks into
place.
Cleaning the fine dust filter
The fine dust filter is equipped with a
self-cleaning function. When a specified
degree of soiling is reached, the vac-
uum cleaner switches off automatically
for approx. 20seconds and carries out
a cleaning process. You will hear this
process running.
The ComfortClean button on the vac-
uum cleaner lights up yellow.
Starting the ComfortClean self-clean-
ing function manually(Fig. 26)
If a large amount of dust has been vac-
uumed at once, the ComfortClean self-
cleaning function should be started
manually either during a vacuuming
pause or immediately afterward. This
enables the vacuum cleaner to achieve
the very best cleaning performance
again right away.
With the vacuum cleaner switched
on, press the ComfortClean button
for at least two seconds.
The vacuum cleaner is switched off au-
tomatically for approx. 20 seconds and
a cleaning process is carried out which
results in operational noise.
The ComfortClean button on the vac-
uum cleaner lights up yellow.
The vacuum cleaner will then switch
back on automatically and will operate
with the previously selected setting.
We also recommend emptying and
cleaning the fine dust container once or
twice a year (see "Fault resolution -
Cleaning the fine dust filter manually").
When to change the thread catchers?
(only possible for models with a re-
versible floorhead included as standard)
The thread catchers on the suction inlet
of the reversible floorhead can be re-
placed. Check them from time to time
and replace them if the pile has worn
down.
How to replace the thread lifters
(Fig. 27)
Use a suitable screwdriver to remove
the thread lifters from the slots.
Fit new thread lifters.
Cleaning the roller on the AllTeQ
floorhead (Fig. 28)
(depending on model)
Clean the roller on the floorhead if re-
quired.
Release the bearing (with bayonet fit-
ting) using a coin.
Press the bearing out, and remove.
Remove the roller.
Remove any threads and hair, replace
the roller and refit the bearing, locking
it back into position.
Replacement parts are available from
your Miele dealer or through Miele
Technical Service.

en-US
19
Cleaning and care
Always switch off the vacuum
cleaner before cleaning it and unplug
the power chord from the wall
socket.
Vacuum cleaner and accessories
The vacuum cleaner and all plastic ac-
cessories can be cleaned with a propri-
etary cleaner suitable for use on plastic.
Follow the special cleaning instruc-
tions for the dust container and filter
frame in "Maintenance" and for the
fine dust filter, the pre-filter and the
fine dust container in "Frequently
asked questions".
Do not use abrasive cleaning
agents, glass cleaning agents, all-
purpose cleaners or oil-based condi-
tioning agents!
Do not let the vacuum cleaner
get wet. If moisture gets into the ap-
pliance, there is a risk of electric
shock.

en-US
20
Frequently Asked Questions
With the help of the following guide minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be remedied with-
out contacting the Service Department. Time and money will be saved because a
service call will not be needed.
This guide may help you to find the reason for the fault, and how to correct it.
Problem Possible cause and solution
The vacuum cleaner
turns off automatically.
A temperature limiter switches the vacuum cleaner off
automatically when it gets too hot. This can occur
when the airways are blocked by bulky objects.
Turn the vacuum cleaner off immediately using the
On/Off foot switch , and unplug it.
After removing the cause, wait for approximately 20 -
30 minutes to allow the vacuum cleaner to cool down.
It can then be turned on again.
The ComfortClean but-
ton lights up in yellow.
The vacuum cleaner carries out an automatic cleaning
process which you can hear running.
Wait for approx.20seconds until this cleaning
process has finished.
The ComfortClean but-
ton lights up in red.
The vacuum cleaner
switches itself to the
lowest power setting.
The dust container is full.
Empty the dust container.
The pre-filter is dirty.
Clean the pre-filter (see "Frequently asked ques-
tions - Cleaning the pre-filter").
The fine dust filter is dirty.
Clean the fine dust filter at the next available op-
portunity (see "Frequently asked questions -
Cleaning the fine dust filter manually").
Cleaning power is re-
duced.
The pre-filter is dirty.
Clean the pre-filter (see "Frequently asked ques-
tions - Cleaning the pre-filter").
The fine dust container is full.
Empty and clean the fine dust container at the
next available opportunity (see "Frequently asked
questions - Cleaning the fine dust filter manually").