Miele DA 289 User manual

Operating and installation instructions
Cooker hoods
DA 289, 289 EXT
To avoid the risk of accidents
or damage to the appliance
it is essential to read these
instructionsbefore it is installed
or used for the first time.
GiWOZ
M.-Nr. 05 785 240

Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Description of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Brief description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Operation
Main switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
To switch the fan on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
To select a power level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Run-on option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
To switch the fan off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
To switch the lighting on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
To dim the lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
To switch the lighting off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Filter operating hours counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Reading the filter operating hours counter. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Altering the filter operating hours counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cleaning and care
Housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Vapour plate and grease filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Changing a halogen lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Appliance dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Installation
Assembly parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Protective cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Dismantling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Connection for air extraction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Condensate trap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Contents
2

Disposal of the pac ing material
The transport and protective packing
has been selected from materials which
are environmentally friendly for disposal
and can normally be recycled.
Ensure that any plastic wrappings,
bags etc. are disposed safely and kept
out of the reach of babies and young
children. Danger of suffocation!
Rather than just throwing these materi-
als away, please ensure that they are
recycled.
Disposal of your old appliance
Old appliances contain materials which
can be reclaimed or recycled. Please
contact your dealer, your local waste
collection centre or scrap merchant
about potential recycling schemes.
Ensure that the appliance presents no
danger to children while being stored
for disposal.
See the appropriate section in the
Warning and safety instructions.
Caring for the environment
3

This appliance complies with all rele-
vant legal safety requirements. Inap-
propriate use can however lead to
personal injury and damage to prop-
erty.
Before installation and before using
for the first time read the operating
instructions carefully. They contain
important information on safety, in-
stallation, use and maintenance of
the appliance. This way you will
avoid the risk of accidents and dam-
age to the appliance.
Keep these operating instructions in
a safe place and ensure that all us-
ers are familiar with the contents.
Pass them on to any future owner of
the appliance.
Correct usage
The appliance is intended for do-
mestic use only.
The manufacturer cannot be held liable
for damage caused by improper or in-
correct use of the appliance.
Technical safety
Before connecting the appliance to
the mains supply, make sure that
the voltage and frequency details given
on the data plate correspond with the
on-site electricity supply, otherwise the
appliance could get damaged. Consult
a qualified electrician if in doubt.
The electrical safety of this appli-
ance can only be guaranteed when
continuity is complete between the ap-
pliance and an effective earthing sys-
tem which complies with local and na-
tional regulations. It is most important
that this basic safety requirement is
present. If in any doubt, the electrical
wiring should be checked by a quali-
fied electrician. The manufacturer can-
not be held liable for the consequences
of an inadequate earthing system (e.g.
electric shock).
Installation work and repairs may
only be carried out by suitably
qualified and competent persons to en-
sure safety. Repairs and other work by
unqualified persons could be danger-
ous and the manufacturer will not be
held liable.
This equipment is not designed for
maritime use or for use in mobile
installations such as caravans, aircraft
etc. However it may be suitable for
such usage subject to a risk assess-
ment of the installation being carried
out by a suitably qualified engineer.
Warning and Safety instructions
4

The appliance is only completely
isolated from the electricity supply
when:
–it is switched off at the wall socket
and the plug removed. (Do not pull
on the cable, only on the plug), or
–the fuse from the fused spur connec-
tion unit is withdrawn, or
–the mains fuse is withdrawn, or
–the screw-out fuse is removed in
countries where this is applicable.
Ensure power is not supplied to the
appliance while maintenance or re-
pair work is being carried out.
Do not connect the appliance to
the mains electricity supply by an
extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
Use
Do not let small children play with
the appliance or its controls or op-
erate it. Supervise its use by the elderly
or infirm.
Never use an open flame beneath
the cooker hood. To avoid the dan-
ger of fire, do not flambé or grill over an
open flame. When switched on, the
cooker hood could draw flames into the
filter. Fat particles drawn into the cooker
hood present a fire hazard.
Always switch the cooker hood on
when using the hob, otherwise
condensation may collect in the hood,
which could cause corrosion.
When cooking with oil or fat, chip
pans and deep fat fryers etc, do
not leave the pans unattended. Never
leave an open grill unattended when
grilling.
Overheated oil and fat can ignite and
could set the cooker hood on fire.
Do not use the cooker hood without
the vapour plate and grease filter
in place.
This way you will avoid the risk of
grease and dirt getting into the appli-
ance and hindering its smooth opera-
tion.
The vapour plate and grease filter
should be cleaned regularly.
A saturated filter is a fire hazard. (See
"Cleaning and care").
Under no circumstances use a
steam-cleaning appliance to clean
this appliance. Pressurised steam
could reach the electrical components
and cause a short circuit.
In countries where there are areas
which may be subject to infestation
by cockroaches or other vermin, pay
particular attention to keeping the appli-
ance and its surroundings in a clean
condition at all times. Any damage
which may be caused by cockroaches
or other vermin will not be covered by
the appliance guarantee.
Warning and Safety instructions
5

Installation
The distance between the top of
the cooker/hob and the bottom of
the cooker hood must measure at least:
–365 mm above electric/gas hobs and
cookers.
Safety regulations prohibit the fit-
ting of a cooker hood over solid
fuel stoves.
All ducting, pipework and fittings
must be of non-flammable material.
These can be obtained from the Miele
Spare Parts department or from build-
ers' merchants.
The appliance must not be con-
nected to a chimney or vent flue
which is in use. Neither should it be
connected to ducting which ventilates
rooms with fireplaces.
If exhaust air is to be extracted into
a chimney or ventilation duct no
longer used for other purposes, seek
professional advice.
Warning and Safety instructions
6

When using the cooker hood at the
same time as another heating ap-
pliance which depends on the air in the
room (e.g. gas, oil or coal fired heaters,
continuous flow or other water heaters,
gas cooker, gas hob or gas oven), spe-
cial care must be taken as the action of
the cooker hood extracts air from the
room in which it is installed and from
neighbouring rooms, which these type
of heaters need for combustion.
They could also draw exhaust air back
in from chimneys or ducting in contra-
vention of fire safety regulations.
In order to ensure safe operation, and
to prevent gases given off by the heat-
ing appliances from being drawn back
into the room when the extractor and
the heater are in operation simulta-
neously, an underpressure in the room
of 0.04 mbar (4 pa) is the maxium per-
missible.
Ventilation can be maintained by air in-
lets which cannot be blocked, in win-
dows, doors and outside wall vents, or
by other technical measures, such as
ensuring that the extractor can only be
switched on when the heating appli-
ance is switched off or vice-versa.
N.B: The overall ventilation condition of
the dwelling must be taken into ac-
count. If in any doubt, the advice of a
competent builder or, for gas, a "Corgi"
installer must be sought.
Appliances with external fans
For appliances with an external fan
motor fitted (EXT models) the con-
nection of the two units must be made
using the connection cable and the
plug connectors.
Make sure the correct combination of
the two appliances has been selected.
Separate instructions are supplied with
the external fan.
Disposal of your old appliance
Before discarding an old appliance
switch off and disconnect it from
the power supply. Cut off and render
any plug useless. Cut off the cable di-
rectly behind the appliance to prevent
misuse.
This should be done by a competent
person.
The manufacturer cannot be held lia-
ble for damage caused by non-com-
pliance with these Warning and
Safety instructions.
Warning and Safety instructions
7

Description of the appliance
8

aExtension piece
bTower
cCanopy
dControl panel
eHob lighting
fMaster switch
gGrease filter
hVapour plate
iTouch control for
the hob lighting
This control switches the lighting on
and off and is also a dimmer switch.
jOn/Off touch control for
the fan
kControls to select the
fan power level
lTouch control for the
run-on option
The fan can be set to continue running
for 5 to 15 minutes. The fan is switched
off automatically after either 5 or 15
minutes.
mTouch control for the
grease filter
The indicator lamp for the grease filter
touch control lights up when the vapour
plate and grease filter need to be
cleaned.
The touch control is used:
– to reset the operating hours counter
after cleaning the vapour plate and
the grease filter (see "Cleaning and
Care").
– to show how long the grease filter
has been in use (see "Operation / Fil-
ter operating hours counter").
– to alter the number of hours counted
by the filter operating hours counter
(see "Operation / Altering the filter
operating hours counter").
Description of the appliance
9

The cooker hood works with
. . . air extraction:
The air is drawn in through the vapour
plate, cleaned by the grease filter and
directed outside.
If the on-site ventilation system does
not have a non-return flap, the
non-return flap supplied must be fit-
ted.
The flap is closed when the cooker
hood is switched off. No exchange of
room air and outside air can take place.
When the cooker hood is switched on,
the non-return flap opens for the cook-
ing vapours to be blown directly out-
side.
. . . an external fan:
The EXT models are designed to be
connected to an external fan located
outside the room.
The external fan is connected to the
cooker hood by means of a control ca-
ble and is operated by the controls on
the cooker hood.
Brief description
10

Master switch
Switch the master switch to "I". The fan
and the lighting can now be operated.
If the appliance is not going to be used
for a longer period of time (e.g. whilst
on holiday) switch the appliance off by
turning the master switch to "0".
The next time it is switched on the
cooker hood will operate at the level
previously used.
To operate the master switch the
vapour plate must first be removed (see
"Cleaning and Care").
To switch the fan on
^Press the On/Off touch control.
The fan runs at power level “lI”.
The indicator lamp comes on.
To select a power level
^Use the –/+controls to select the
power level required.
Touch control += higher setting
Touch control –= lower setting
Depending on the intensity of cooking
vapours, levels "I" to "III" (green indica-
tor lamps) are usually sufficient for nor-
mal cooking.
Intensive setting
When frying or cooking food with a
strong aroma, you may wish to select
the Intensive setting (yellow indicator
lamp) for a short period.
Run-on option
If the air still needs to be cleared after
cooking, the cooker hood can be set to
continue running.
The fan is switched off automatically af-
ter either 5 or 15 minutes.
^Press the run-on option touch control
whilst the fan is still running.
Press once = The fan switches off
after 5 minutes.
(left hand indicator lamp)
Press twice = The fan switches off
after 15 minutes.
(right hand indicator lamp)
To switch the run-on option off, press
the run-on option touch control again.
Operation
11

To switch the fan off
^Press the On/Off touch control to
switch the fan off.
The indicator lamp for the control goes
out.
To switch the lighting on
The hob lighting can be switched on
and off independently of the fan.
^Briefly press the lighting touch con-
trol to switch on the hob lighting.
The indicator lamp for the control co-
mes on.
The lighting will come on at maximum
brightness.
To dim the lighting
The brightness of the lighting can be
dimmed.
^With the lighting switched on, press
and hold the hob lighting control in.
The brightness will gradually dim until
you release the control.
^Press the control in again to increase
the brightness to the level required
and then release it.
If you keep the control pressed in, the
brightness will continually go brighter
and then dimmer.
To switch the lighting off
^Briefly press the hob lighting control
to switch the lighting off.
The indicator lamp for the control goes
out.
Safety cut-out
Should the cooker hood have been left
switched on, the fan will switch off auto-
matically after 10 hours. The lighting re-
mains on.
^Pressing the On/Off touch control will
switch the fan back on again.
Operation
12

Filter operating hours counter
The number of hours the appliance has
been in operation is stored in memory.
The indicator lamp for the grease filter
control will light up after 30 hours of op-
eration. The vapour plate and the
grease filter must then be cleaned.
After the vapour plate and the grease
filter have been cleaned and put in
place, the filter operating hours counter
must be re-set.
^To do this, press the grease filter
touch control and hold for about
3 seconds.
The indicator lamp for the control will
go out.
Reading the filter operating hours
counter
To check the percentage of time set al-
ready used:
^Press the On/Off touch control to
switch the fan on.
^Press the grease filter touch control.
One or several of the indicator lamps
for the –/+touch controls will flash.
The number of flashing lamps shows
the percentage of the operating time
which has already been used up.
1 lamp = 25 %
2 lamps = 50 %
3 lamps = 75 %
4 lamps = 100 %
The number of operating hours used re-
mains in the memory, even when the
appliance is switched off or there is a
power cut.
Operation
13

Altering the filter operating hours
counter
The operating hours counter for the
grease filter is set to 30 hours. This can
be lengthened or shortened to suit the
type of cooking you do.
You can choose from 20, 30, 40 or
50 hours.
–Select a short time if you roast or fry
a lot.
–If you use very little fat for cooking,
select a longer time.
–If you only cook occasionally, we rec-
ommend that you select a short time
because grease which has built up
gradually over a long period of time
will harden on the grease filter and
make cleaning more difficult.
^Press the On/Off touch control to
switch the fan off.
^Press the run-on option touch control
and the grease filter touch control at
the same time.
The indicator lamp for the grease filter
touch control and one of the –/+touch
control lamps will flash.
The –/+control lamps show the time
which has been set:
1st lamp from the left = 20 hours
2nd lamp from the left = 30 hours
3rd lamp from the left = 40 hours
4th lamp from the left = 50 hours
^Use the –/+touch controls to select
the desired time.
^Confirm the selection by pressing the
grease filter touch control.
If the procedure is not confirmed
within 4 minutes of programming the
steps, the cooker hood will automati-
cally revert to the “old” data.
Operation
14

Before any cleaning or maintenance
work disconnect the cooker hood
from the mains supply. Ensure that:
– it is switched off at the wall socket
and the plug removed (do not pull
on the cable, only on the plug), or
– the fuse is withdrawn from the
fused spur connection unit, or
– the mains fuse is withdrawn, or
– the screw-out fuse is removed (in
countries where this is applicable).
Housing
Warning: The surfaces and controls
are susceptible to scratches and
abrasion. Please observe the follow-
ing cleaning instructions.
E-Cloth
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
Part Number 98013530, which is suit-
able for cleaning surfaces such as
stainless steel, glass, plastic and
chrome without the use of chemicals. It
can be washed 300 times.
^All external surfaces and controls can
be cleaned using warm water with a
little washing up liquid applied with a
well wrung out soft sponge or cloth.
^Wipe the surfaces dry using a soft cloth.
Do not use too much water when
cleaning the controls. Water could
penetrate into the electronics and
cause damage.
^Glass surfaces can be cleaned using
a proprietary cleaning agent for glass.
Avoid:
–cleaning agents containing soda, ac-
ids or chlorides,
–abrasive cleaning agents, e.g. pow-
der cleaners or cream cleaners and
abrasive sponges, e.g. pot scourers
or sponges which have been used
previously with abrasive cleaning
agents.
These will damage the surface material.
Stainless steel surfaces
Stainless steel surfaces can be cleaned
using a proprietary non-abrasive clean-
ing agent designed specifically for use
on stainless steel.
To help prevent re-soiling, proprietary
conditioning agents for stainless steel
can also be used. Apply sparingly with
an even pressure following the direction
of the grain.
Stainless steel coloured controls
The controls may suffer discolour-
ation or damage if soiling is left on
them for too long.
Remove any soiling straight away.
Do not use stainless steel cleaning
agents on the controls.
If you are unsure about a particular
product or need further advice please
contact your nearest Miele Sales of-
fice. See back page for address.
Cleaning and care
15

Vapour plate and grease filter
The vapour plate and the re-useable
metal grease filter remove solid parti-
cles from the kitchen vapours (grease,
dust, etc) preventing soiling of the
cooker hood.
The vapour plate and grease filter
should be cleaned regularly (at least
every 3-4 weeks) to avoid a built-up of
fat.
They should be cleaned immediately if
the grease filter touch control lamp co-
mes on.
An over saturated filter is a fire haz-
ard.
To remove the vapour plate
^Pull the vapour plate down towards
you at the top, push the bottom
slightly to the right and pull forwards
to remove (see illustration).
To remove the grease filter
^Pull the grease filter by the hand hold
forwards and out.
Cleaning and care
16

^Clean the filter
–by hand: with a soft nylon brush,
warm water and a little washing up
liquid.
–in a dishwasher: place the filter
with the short side upright in the
lower basket, ensuring the spray arm
is not obstructed.
Depending on the cleaning agent
used, cleaning the grease filter in a
dishwasher can cause permanent
discolouration to the surface.
However, this will not affect the func-
tioning of the grease filter in any way.
^After cleaning, leave the filter to dry
for a while on an absorbent surface
before putting it back in place.
^When cleaning the vapour plate,
please follow the instructions given
under "Housing" earlier in this sec-
tion.
^With the vapour plate and grease fil-
ter removed, clean off any residues of
oil or fat from the now accessible
housing and channel on the lower
housing to prevent the risk of these
catching fire.
^After replacing the vapour plate and
grease filter press the grease filter
touch control for approx. 3 seconds
to re-set the operating hours counter.
The indicator lamp will go out.
^If the vapour plate and grease filter
are cleaned before the operating
hours counter has reached its maxi-
mum, the grease filter touch control
should be pressed for approx. 6 sec-
onds to reset the counter to zero.
^Push the grease filter into position un-
til it engages.
^Hook the vapour plate into the bottom
of the housing, push it slightly to the
left and then raise it up towards the
appliance and click it into position.
Cleaning and care
17

Changing a halogen lamp
Disconnect the cooker hood from
the mains supply by
– switching it off at the wall socket
and removing the plug, or
– withdrawing the fuse from the
fused spur connection unit, or
– withdrawing the mains fuse, or
– removing the screw-out fuse, (in
countries where this is applicable).
Exercise caution when changing
halogen lamps. They get very hot
during use and remain hot for some
time after being switched off. Do not
touch the surface directly when
changing a lamp, as grease prticles
from your fingers will adhere to the
surface and damage it. Please fol-
low manufacturer's instructions.
^Use the lever supplied to pull the
halogen lamp out of its socket.
Take care not to let the lamp fall onto
the hob below.
^Insert the new halogen lamp into its
socket and carefully push into posi-
tion.
When replacing a defective lamp it
is essential to use exactly the same
type of lamp (see "Technical data"
for lamp specification).
Cleaning and care
18

In the event of a fault which you cannot
correct yourself, or if the appliance is
under guarantee please contact:
–Your Miele Dealer
or
–The Miele Service Department (see
back cover for address).
When contacting the Service Depart-
ment, please quote the model and serial
number of your appliance. These are
shown on the data plate which is visible
when the grease filter is removed.
Please note that telephone calls may
be monitored and recorded to im-
prove our service.
After sales service
19

Appliance dimensions
20