Miele DA 6881 User manual

Operating and Installation Instructions
Downdraft
To prevent accidents and damage to the appliance, you must read
these instructions before installing the appliance and using it for the first
time.
en-US M.-Nr. 10 651 741

Contents
2
IMPORTANT SAFETY INSTRUCTIONS ................................................................ 3
Caring for the environment ................................................................................ 11
Guide to the appliance........................................................................................ 12
Description of functions ..................................................................................... 14
Operation.............................................................................................................. 15
Extending/retracting the canopy, switching the blower on/off.............................. 15
Selecting the power level ...................................................................................... 15
Selecting the delayed shut down time .................................................................. 15
Turning the overhead lighting on/off...................................................................... 15
Energy-saving tips............................................................................................... 16
Cleaning and care ............................................................................................... 17
Stainless steel housing.......................................................................................... 17
Grease filters and edge extraction panel............................................................... 18
OdorFree Charcoal Filter ....................................................................................... 20
Disposing of charcoal filters .............................................................................20
Installation............................................................................................................ 21
Before installation.................................................................................................. 21
Installation parts .................................................................................................... 21
Appliance dimensions ........................................................................................... 22
Cabinet dimensions............................................................................................... 24
Cutout for flush-fit installation ............................................................................... 25
Support bracket .................................................................................................... 26
Vented mode ......................................................................................................... 32
Recirculating mode ............................................................................................... 32
Air venting ............................................................................................................ 33
Electrical connection .......................................................................................... 34
Grounding Instructions.......................................................................................... 34
Power supply......................................................................................................... 34
Electrical connection of an external blower .......................................................... 36
Service and warranty .......................................................................................... 37
Location of the data plate ..................................................................................... 37
MieleCare .............................................................................................................. 37
Technical data..................................................................................................... 38

IMPORTANT SAFETY INSTRUCTIONS
3
READ AND SAVE THESE INSTRUCTIONS
This appliance complies with current safety requirements.
Improper use of the appliance can lead to personal injury and
material damage.
Read all instructions before installing or using the appliance for the
first time. Only use the appliance for its intended purpose.
Keep these operating instructions in a safe place and pass them
on to any future user.
Use
 CAUTION: For General Ventilating Use Only. Do Not Use To
Exhaust Hazardous Or Explosive Materials And Vapors.
 This appliance is intended for residential use only. Use only as
described in these operating instructions.
 This ventilation hood is not intended for outdoor use.
 It must only be used to extract and clean vapors produced during
cooking. Any other use occurs at the owner's own risk.
 This appliance is suitable for installation above gas or electric
cooking surfaces.
 Persons who lack physical, sensory or mental abilities, or
experience with the appliance should not use it without supervision
or instruction by a responsible person.

IMPORTANT SAFETY INSTRUCTIONS
4
Children
 As with any appliance, close supervision is necessary when used
by children.
 Please supervise children in the vicinity of the hood and do not let
them play with it.
 Danger of suffocation! Ensure that any plastic wrappings, bags,
etc. are disposed of safely and kept out of the reach of children.
Technical safety
 WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
– Use this appliance only in the manner intended by the
manufacturer. If you have questions, contact Miele.
– Before servicing or cleaning the appliance, switch power off at the
service panel and lock the service disconnecting means to
prevent power from being switched on accidentally. If the service
disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
 CAUTION: To Reduce The Risk Of Fire And Electric Shock Install
This Rangehood Only With Internal Blower Miele DAG 600 Or
External Blower Miele DAG 1000.
 Installation, repair and maintenance work should be performed by
a Miele authorized service technician in accordance with national
and local safety regulations and the provided installation
instructions. Contact Miele’s Technical Service Department for
examination, repair or adjustment. Repairs and other work by
unauthorized persons could be dangerous and may void the
warranty.
 A damaged ventilation hood can be dangerous. Always check for
visible signs of damage. Never use a damaged ventilation hood.

IMPORTANT SAFETY INSTRUCTIONS
5
 Be certain your appliance is properly installed and grounded by a
qualified technician. To guarantee the electrical safety of this
appliance, continuity must exist between the appliance and an
effective grounding system. It is imperative that this basic safety
requirement be met. If there is any doubt, have the electrical system
of the house checked by a qualified electrician.
 Reliable and safe operation of this hood can only be guaranteed if
it has been connected to the electrical supply.
 To avoid damaging the ventilation hood, make sure that the
connection data (voltage and frequency) on the data plate
correspond to the building's power supply before connecting the
appliance.
If in doubt, consult a qualified electrician.
 Do not use a power bar or extension cord to connect the
ventilation hood to electricity. These are a fire hazard and do not
guarantee the required level of appliance safety.
 To ensure safe operation, only use the ventilation hood after it has
been properly installed.
 This ventilation hood may not be used in non-stationary locations
(e.g. on a ship).
 Adequate ventilation must be provided when the hood is operated
simultaneously with devices that burn gas or other fuels.
 Only open the housing as described in the enclosed “Installation
diagram” and in the “Cleaning and care” section of this manual.
Under no circumstances should any other parts of the housing be
opened.
Tampering with electrical connections or components and
mechanical parts is highly dangerous to the user and can cause
operation faults.

IMPORTANT SAFETY INSTRUCTIONS
6
 Defective components should be replaced by Miele original parts
only. Only with these parts can the manufacturer guarantee the
safety of the appliance.
 If the power cord is damaged, it must only be replaced by a
qualified service technician.
 During installation, maintenance, and repair work, the ventilation
hood must be disconnected from the electrical supply. It is only
completely isolated from the electricity supply if one of the following
applies:
– The circuit breakers on the electrical service panel are tripped.
– The screw-type fuses on the electrical service panel have been
removed.
– The power cable (if present) has been unplugged from the socket
(pull the plug not the cord).
Proper use
 Danger! Do not reach into the motion range of the canopy while it
is extending/retracting.
 WARNING: TO REDUCE THE RISK OF A COOKTOP GREASE
FIRE:
– a) Never leave surface units unattended at high settings. Boilovers
cause smoking and greasy spillovers may ignite. Heat oils slowly
on low or medium settings.
– b) Always turn the hood on when cooking at a high heat.
– c) Clean the ventilation hood frequently. Grease should not be
allowed to accumulate on the fan or filter.
– d) Use the proper pan size. Always use cookware appropriate for
the size of the cooking area.

IMPORTANT SAFETY INSTRUCTIONS
7
 WARNING: TO REDUCE THE RISK OF INJURY TO PERSONS IN
THE EVENT OF A COOKTOP GREASE FIRE, OBSERVE THE
FOLLOWING*:
– a) SMOTHER FLAMES with a close fitting lid, cookie sheet, or
metal tray then turn off the burner. BE CAREFUL TO PREVENT
BURNS. If the flames do not go out immediately, EVACUATE AND
CALL THE FIRE DEPARTMENT.
– b) NEVER PICK UP A FLAMING PAN - You may be burned.
– c) DO NOT USE WATER, including wet dishcloths or towels - a
violent steam explosion will result.
– d) Use a fire extinguisher ONLY if:
– 1) You have a class ABC extinguisher, and you know how to operate it.
– 2) The fire is small and contained in the area where it started.
– 3) The fire department is being called.
– 4) You can fight the fire with your back to an exit.
*Based on “Kitchen Fire Safety Tips” published by NFPA.
 The ventilation hood may become damaged if exposed to
excessive heat from a gas cooktop.
– When using the ventilation hood over a gas cooktop, ensure that
any burners in use are always covered by cookware. Turn burners
off when removing the cookware, even if doing so for just a short
time.
– Select cookware that is suitable for the size of the burner.
– Adjust the flame so that it never extends up the sides of the
cookware.
– Avoid overheating the cookware (e.g., when cooking with a wok).
 Always turn the ventilation hood on whenever a burner is in use to
prevent damage from condensation.

IMPORTANT SAFETY INSTRUCTIONS
8
 Overheated oil and fat can ignite, causing fire damage to the
ventilation system.
Do not leave cookware, pans, and deep fryers unattended when
cooking with oil or fat. Similarly, never leave an open grill unattended
when grilling.
 Fat and debris deposits impair the proper functioning of the
ventilation hood.
To ensure that cooking vapors are properly cleaned, never use the
ventilation hood without the grease filters in place.
 Please note that the heat rising from the stovetop during cooking
can cause the ventilation hood to become very hot.
Do not touch the housing or the grease filters until the ventilation
hood has cooled down.

IMPORTANT SAFETY INSTRUCTIONS
9
Proper installation
 WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
– a) Installation work and electrical wiring must be done by qualified
person(s) in accordance with all applicable codes and standards,
including fire-rated construction.
– b) Sufficient air is needed for combustion and exhausting of gases
through the flue (chimney of fuel burning equipment to prevent
back drafting. Follow the heating equipment manufacturer’s
guideline and safety standards such as those published by the
National Fire Protection Association (NFPA) and the American
Society for Heating, Refrigeration and Air Conditioning Engineers
(ASHRAE), and the local code authorities.
– c) When cutting or drilling into the wall or ceiling, do not damage
electrical wiring and other hidden utilities.
– d) Ducted hoods must always be vented to the outdoors.
– e) Do not use this hood with any solid-state speed control device.
 To determine whether a ventilation hood may be operated above
your cooking appliance, please refer to the information provided by
the appliance's manufacturer.
 Safety regulations prohibit the installation of a ventilation hood
over solid fuel stoves.
 Insufficient distance between the cooking appliance and the
ventilation system can result in damage to the hood.
The minimum safety distances between the appliance and the
bottom of the ventilation system specified in the “Installation”
section must be maintained, unless the appliance's manufacturer or
local building codes has indicated that a greater distance is required.
If more than one cooking appliance is used beneath the ventilation
system, and if different minimum safety distances apply for these
appliances, you should use the greater distance.

IMPORTANT SAFETY INSTRUCTIONS
10
 Be sure to observe the information contained in the “Installation”
section when mounting the ventilation hood.
 Metal parts can have sharp edges which may cause injury.
Wear gloves to protect your hands from being cut.
 When installing the exhaust duct, only use pipes or tubes made of
non-flammable material. These can be obtained from your Miele
dealer or from Miele Technical Service.
 Exhaust air should not be vented into a chimney or vent flue which
is otherwise in use and should not be channeled into ducting which
ventilates rooms with fuel-burning installations.
 If exhaust air is to be extracted into a chimney or ventilation duct
no longer used for other purposes, seek professional advice.
 WARNING: TO REDUCE THE RISK OF FIRE USE ONLY METAL
DUCTWORK.
Cleaning and care
 There is a risk of fire if cleaning is not completed according to the
instructions in this manual.
 Never use a steam cleaner to clean the ventilation hood.
The steam can reach the electrical components and cause a short
circuit.
Accessories
 Use only genuine original Miele parts. If parts or accessories from
other manufacturers are used, the warranty will become void.

Caring for the environment
11
Disposal of the packing
material
The cardboard box and packing
materials protect the appliance during
shipping. They have been designed to
be biodegradable and recyclable.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
Disposal of your old appliance
Electrical and electronic appliances
contain valuable materials. They also
contain certain substances, compounds
and components which were essential
for the proper functioning and safe use
of the equipment. Handling these
materials improperly by disposing of
them in your household waste can be
harmful to your health and the
environment. Therefore, please do not
dispose of your old appliance with
regular household waste and follow
local regulations on proper disposal.
Consult with local authorities, dealers or
Miele in order to dispose of and recycle
electrical and electronic appliances.
Miele assumes no responsibility for
deleting any personal data left on the
appliance being disposed. Please
ensure that your old appliance is kept
away from children until removal.
Observe safety requirements for
appliances that may tip over or pose an
entrapment hazard.

Guide to the appliance
12

Guide to the appliance
13
aControl panel
bRetractable canopy
cCooktop lighting
dEdge extraction panel
eGrease filter
fCharcoal filter
Optional accessory for recirculation mode
gDAG 600 blower unit
Optional accessories
hExhaust connection
iOn/Off control for the retractable canopy and the blower
jOverhead lighting button
kButtons for setting the blower power
lDelayed shutdown button
mFilter saturation indicator

Description of functions
14
The following functions are available on
your ventilation hood, depending on the
model:
Vented mode
(requires DAG 600 internal blower as
optional accessory)
The cooking vapors are drawn in by the
ventilation system. The air is then
passed via the edge extraction panel
through the grease filters, cleaned and
then directed outside.
Recirculating mode
(requires DAG 600 internal blower,
conversion kit and charcoal filter,
available as optional accessories)
The air is drawn in and passed via the
edge extraction panel through the
grease filters and then through the
charcoal filters. The cleaned air is then
recirculated back into the kitchen.
Operation with an external
blower
(requires DAG 1000 external blower as
optional accessory)
The external blower is mounted on the
roof or an outside wall. It is connected
to the ventilation system by a control
cord and is operated by the ventilation
system's control panel.

Operation
15
Extending/retracting the
canopy, switching the blower
on/off
Danger!
Do not reach into the motion range
of the canopy while it is extending/
retracting.
Switch the blower on as soon as you
start cooking. This is to ensure that
vapors are captured right from the start.
Touch the On/Off control until all
symbols are lit up.
The canopy comes up. The blower
switches on at power level 2, the
cooktop lighting switches on at 70%
brightness.
Touch the On/Off control  briefly to
switch the blower off.
The blower can be switched on again
by briefly touching one of the blower
power level controls.
To retract the canopy, press the On/
Off control until all symbols are lit
up.
The canopy retracts. All the symbols go
out.
Selecting the power level
Power levels 1 to 3 are available for light
to heavy cooking vapors and odors.
For strong vapors and odors that are
temporarily produced when cooking,
e.g., during searing, select the B
booster level.
Select the power level required by
tapping a button from 1 to B.
Reducing power of the booster
level
The blower automatically switches back
to power level 3 after 5 minutes.
Selecting the delayed shut
down time
It is advisable to run the blower for a
few minutes after cooking has finished
to remove any lingering vapors and
odors in the air.
With the delayed shutdown option, the
blower switches itself off automatically
after 15minutes.
After cooking has finished, press the
delayed shutdown control 15 while
the blower is still running.
The blower will switch off after
15minutes. The deflector plate remains
extended.
If you touch the delayed shutdown
control 15 again, the blower will
remain on.
Turning the overhead lighting
on/off
The cooktop lighting is switched on
and off when the deflector plate is
extended and retracted.
The cooktop lighting switches on at
70% brightness.
Touch the cooktop lighting control 
to switch the lighting to 100%
brightness.
Touch the cooktop lighting control
again to switch the lighting off.

Energy-saving tips
16
This hood operates in a very efficient
and energy-saving manner. The
following will help you to save even
more energy when using it:
– Ensure that there is sufficient
ventilation in the kitchen when
cooking. If there is insufficient air flow
during vented mode, the hood
cannot operate efficiently, causing
increased operating noise levels.
– Always cook with the lowest possible
setting. This produces fewer cooking
vapors so that you can use a lower
hood power level and therefore
benefit from reduced energy
consumption.
– Check the power level selected on
the hood. A lower power level is
generally sufficient for the majority of
cooking. Only use the booster level
when necessary.
– When a large volume of cooking
vapors are being produced, switch to
a high power level in good time. This
is more efficient than operating the
hood for longer to try to capture
cooking vapors that have already
been distributed throughout the
kitchen.
– Make sure that you switch off the
hood after use.
– Clean or change the filters at regular
intervals. Heavily soiled filters reduce
performance, increase the risk of fire
and are unhygienic.

Cleaning and care
17
WARNING: TO REDUCE THE
RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
Before cleaning or servicing the
hood, disconnect it from the power
supply, see “IMPORTANT SAFETY
INSTRUCTIONS”.
Stainless steel housing
General information
The surfaces and control buttons
are susceptible to scratching and
chipping.
Observe the following cleaning
instructions.
Clean all surfaces and control buttons
using warm water and liquid dish
soap. Apply with a sponge cloth.
Make sure that no water gets
into the interior of the hood.
Only use a damp cloth to clean the
hood, especially in the control panel
area.
After cleaning, dry the surfaces with a
soft cloth.
Avoid the following:
– Cleaners containing soda, acid or
chloride, or cleaners containing
solvents
– Abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents.
Special instructions for stainless
steel surfaces
Stainless steel surfaces can also be
cleaned using a non-abrasive
stainless steel cleaner.
To prevent the surfaces from quickly
becoming dirty again, we recommend
treating them with a stainless steel
care conditioner.
Apply sparingly over the entire area
using a soft cloth.
Special instructions for glass
surfaces
Glass surfaces can be cleaned using
a commercial glass cleaner.

Cleaning and care
18
Grease filters and edge
extraction panel
The edge extraction panel and the
reusable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapors, preventing soiling of the hood.
The grease filters and the panel must be
cleaned at regular intervals.
Heavily soiled grease filters hinder air
extraction and will lead to increased
levels of soiling in the ventilation hood
and in the kitchen.
Risk of fire!
Oversaturated grease filters are a fire
hazard.
Clean the grease filters at regular
intervals.
Cleaning intervals
Grease which has collected in the
ventilation hood hardens over time and
makes cleaning more difficult. It is
therefore recommended that the edge
extraction panel and the grease filters
should be cleaned regularly (at least
every 3–4 weeks) to avoid a build-up of
grease.
After 30 operating hours, the grease
filter symbol  will light up when the
deflector plate is out to remind you to
clean the edge extraction panel and the
grease filters.
Removing the panel and grease
filters
The panel is held in place by magnets
at the top. Pull the panel forwards by
the upper edge, unhook it at the
bottom and remove it.
Open the grease filter retainer catch
and remove the filters.
If charcoal filters are fitted on the
back of the grease filters, they must
be removed before cleaning (see
“Charcoal filters”).

Cleaning and care
19
Cleaning the panel
Follow the instructions under
“Stainless steel housing.”
The panel is not suitable for cleaning
in a dishwasher.
Cleaning the grease filters by hand
Clean the filters with a soft nylon
brush in a mild solution of hot water
and dish soap. Do not use undiluted
dish soap.
Unsuitable cleaning agents
Unsuitable cleaners can cause damage
to the filter surfaces if used regularly.
Do not use any of the following:
– Lime removers
– Abrasive powders or abrasive liquids
– Aggressive all-purpose cleaners and
degreaser sprays
– Oven sprays
Cleaning the grease filters in a
dishwasher
Place the grease filters upright or
slightly inclined in the lower basket.
Ensure the spray arm is not
obstructed.
Use a commonly available household
dishwashing detergent.
In a Miele dishwasher use the
“Normal” program.
Depending on the detergent used,
cleaning the filters in a dishwasher
may cause the inside filter surfaces to
become discolored. However, this will
not affect the functioning of the grease
filters in any way.
After cleaning
After cleaning, leave the filters on an
absorbent surface to dry.
When removing the panel and filters
for cleaning, also clean off any
accessible oil or grease buildup from
the housing. Doing so will prevent a
fire hazard.
Resetting the filter saturation counter
for the grease filters
Once cleaning is complete, the filter
saturation counter must be reset.
With the deflector plate out, touch the
grease filter control  for approx. 3
seconds until the grease filter symbol
 goes out.

Cleaning and care
20
OdorFree Charcoal Filter
In recirculation mode with conversion
kit DUU 2900, two charcoal filters are
fitted into the recirculation unit. Refer to
the Operating and installation
instructions supplied.
In recirculation mode with conversion
kit DUU 151, two DKF 22-1 charcoal
filters are fitted on the back of the
grease filters. These absorb the odors
which arise during cooking.
Charcoal filters are available from your
dealer or from Miele Service.
How to install/replace the charcoal
filter
Before installing or replacing the
charcoal filters, the panel and the
grease filters must first be taken out
(see previous section for instructions
on how to do this).
Remove the charcoal filter from its
packaging.
Secure the charcoal filters to the back
of the grease filters with the retainers
provided.
Replace the grease filters and the
panel.
When to change the OdorFree
Charcoal Filter
Replace the charcoal filters when
they no longer absorb kitchen odors
effectively.
They should, however, be replaced at
least every 6months.
Disposing of charcoal filters
Used charcoal filters can be disposed
of with normal household waste.