Miele DA279-4 Parts list manual

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010306
Product Dimensions
Decorator Wall Hood
DA279-4
110 Volt - 15 Amp 3-wire molded plug
power supply connects through top or
rear of chimney.
Standard 110V Outlet
35 7/16"
19 11/16"
28 3/4" - 39 15/16"
See Notes
2 15/16"
Notes
• All installations must be done in
accordance with local codes.
• Recirculation: 32 5/16" - 43 5/16"
• 6" duct connects to blower system inside
chimney.
Location Codes
E -
O -
E
10 5/8"
11 7/16"
Front Perspective
O

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010306
Area must be reinforced
with a minimum of
1/2" plywood backing
Notes
• Center unit over cooking surface
• Distance "S" is determined by the cooking
surface. Minimum distance "S" is:
- 18" for electric surfaces
- 26" for gas surfaces
• Area behind mounting plates MUST be
reinforced using a minimum of 1/2"
plywood. Reinforcing material should be
affixed to structural wall members
Installation Dimensions
Decorator Wall Hoods
DA279-4
Ceiling Line
Center Line
Structural member
S + 1 7/8"