Miele PW 6137 EL User manual

10.11 M.-Nr. 09 270 460 / 01
Installation plan
Washer-extractor
PW 6137 EL
en - GB

M.-Nr. 09 270 460 / 01
2

Technisches Datenblatt / Technical datasheet: PW 6137 EL
Datum / Date: 12.10.2011 Seite / Page: 8
Technical Datasheet
Washer-extractor:
Heating:
PW 6137
Electric (EL)
Legend:
Solid circle around symbol:
Connection mandatory
en-GB
Broken circle around symbol:
Connection optional or as required
Optional extras:
UM
Miele plinth
UO 6013 (UO = Open plinth)
Height
mm
144
Width
mm
780
Depth
mm
899
UG 6013 (UG = Box plinth)
Height
mm
144
Width
mm
800
Depth
mm
909
UO 6013-30 (UO = Open plinth)
Height
mm
300
Width
mm
780
Depth
mm
899
UG 6013-30 (UG = Box plinth)
Height
mm
300
Width
mm
800
Depth
mm
909
BS
Concrete plinth
Recommended height
mm
150
Minimum height
mm
100
Min. plinth width
mm
950
Min. plinth depth
mm
1000
WI
Weighing
system
Model version with integrated weighing system
OS
Offshore
Special offshore version
Machine connections:
Electrical
connection
1. Standard voltage (as supplied)
V
3N AC 380 - 415
Frequency
Hz
50 –60
Rated load
kW
17
Fuse rating
A
3 × 25
Connection cable, min. cross-section
mm²
5 × 4
Connection cable (not supplied)
2. Standard voltage (as supplied)
V
3N AC 380 - 415
Frequency
Hz
50 –60
Rated load
kW
11
Fuse rating
A
3 × 16
Connection cable, min. cross-section
mm²
4 ×2.5
Connection cable (not supplied)

Technisches Datenblatt / Technical datasheet: PW 6137 EL
Datum / Date: 12.10.2011 Seite / Page: 9
Country variations:
1. Standard voltage (as supplied)
V
3 AC 220 - 240
Frequency
Hz
50 - 60
Rated load
kW
17
Fuse rating
A
3 × 50
Connection cable, min. cross-section
mm²
4 ×10
Connection cable (not supplied)
1. Standard voltage (as supplied)
V
3 AC 220 - 240
Frequency
Hz
50 - 60
Rated load
kW
17
Fuse rating
A
3 × 50
Connection cable, min. cross-section
mm²
4 × 10
Connection cable (not supplied)
Alternative voltage (convertible)
V
3 AC 208
Frequency
Hz
60
Rated load
kW
14.3
Fuse rating
A
3 × 50
Connection cable, min. cross-section
mm²
4 × 10
Connection cable (not supplied)
Non-standard voltages:
OS 440
Standard voltage (as supplied)
V
3 AC 440
Frequency
Hz
60
Rated load
kW
17
Fuse rating
A
3 × 25
Connection cable, min. cross-section
mm²
4 × 4
Connection cable (not supplied)
Electrical connection must comply with national legis-
lation, guidelines and ordinances as well as local
regulations. Guidelines issued by power utilities and
insurance companies, occupation safety regulations
and general good practices also apply.
Connection should only be performed by a qualified
person with suitable training.
The machine can be hard-wired or installed with a
plug connection according to IEC 60309-1. A wall
socket or mains isolator must be accessible after
installation.
A plug and socket connection is recommended to
facilitate accessibility for electrical safety tests.
If an earth-leakage circuit breaker (RCD) is required
by local regulations, a Type B device (sensitive to all
types of current) should be installed.
Equi-potential
bonding
Sleeve with external thread
mm
10 × 35
for washer and nut
M
10
Fitting such as washers and nuts are only supplied
with the OS machine version.
If necessary, equipotential bonding with good galvan-
ic contact must be provided in accordance with all
appropriate national and local regulations.
Peak-load
cut-off
Connection voltage for control signals
V
AC 230
Connection cable, min. cross-section
mm²
5 × 1.5
Connection cable (not supplied)
Miele recommends the use of a flexible supply lead
and an additional cut-off switch. The switch should be
visible and accessible after installation.

Technisches Datenblatt / Technical datasheet: PW 6137 EL
Datum / Date: 12.10.2011 Seite / Page: 10
Cold water
Soft water
Min. water pressure/flow pressure
kPa
100
Max. water pressure/flow pressure
kPa
1000
Max. throughput
l/min
26
Max. throughput
(if hot or raw water supply is not available)
l/min
42
2 inlet hoses with ¾" threaded union including Y-
piece (¾" / 1") included.
On-site connection thread according to DIN 44 991
Inch
1" external thread
Length of inlet hose
mm
1500
Average water requirements for standard programme
(60°C Cottons) for cold, hot and raw water connec-
tions.
l/h
Approx. 89
Additional requirements if hot water supply is not
available.
If connected to grey water supply, subtract cold water
(soft) volume.
Hot water
(soft water)
Max. water temperature
°C
70
Min. water pressure/flow pressure
kPa
100
Max. water pressure/flow pressure
kPa
1000
Max. throughput
l/min
16
1 inlet hose with ¾" threaded union supplied.
On-site connection thread according to DIN 44 991
Inch
¾" external thread
Length of inlet hose
mm
1500
Average water requirements for standard programme
(60°C Cottons) for cold, hot and raw water connec-
tions.
l/h
Approx. 93
In the absence of a hot water supply, the hot water
hose should be connected to cold water!
Cold water
Raw water
Min. water pressure/flow pressure
kPa
100
Max. water pressure/flow pressure
kPa
1000
Max. throughput
l/min
32
2 inlet hoses with ¾" threaded union including Y-
piece (¾" / 1") included (optional).
On-site connection thread according to DIN 44 991
Inch
1" external thread
Length of inlet hose
mm
1500
Average water requirements for standard programme
(60°C Cottons) for cold, hot and raw water connec-
tions.
l/h
Approx. 55
Cold water
Liquid
dispensing
Min. water pressure/flow pressure
kPa
100
Max. water pressure/flow pressure
kPa
1000
Max. throughput
l/min
5.5
1 inlet hose with ¾" threaded union included (option-
al).
On-site connection thread according to DIN 44 991
Inch
¾" external thread
Length of inlet hose
mm
1500
Waste water
Drain valve
Max. waste water temperature
°C
95
Waste water connection on machine (ext. diameter)
mm
75 [DN 70]
Drain connection on site (int. diameter)
mm
75 [DN 70]
Max. transient throughput
l/min
200
Vented drainage required. If ventilation is insufficient,
fit Miele kit, Mat. no. 05238090.
Drain manifolds serving several machines must be of
sufficient cross-section.

Technisches Datenblatt / Technical datasheet: PW 6137 EL
Datum / Date: 12.10.2011 Seite / Page: 11
Fasteners
Without plinth
The machine must be firmly anchored to the floor!
Anchor fittings included:
2 × angle brackets (from shipping lock)
2 × bolts DIN 571 (Ø × length)
mm
8 x 80
2 × rawl plugs (Ø × length)
mm
12 x 60
The floor must be solid and able to support the ma-
chine. The fittings included are suitable for a solid
concrete floor. Anchor bolts and fittings for other floor
types must be provided on site.
On concrete plinth
The machine must be firmly anchored to the floor!
Anchor fittings included:
2 × angle brackets (from shipping lock)
2 × bolts DIN 571 (Ø × length)
mm
8 x 80
2 × rawl plugs (Ø × length)
mm
12 x 60
The grade of concrete should be suitable for the load.
The plinth should be firmly anchored to the floor to
accommodate dynamic stress!
Miele plinth
The plinth must be firmly anchored to the floor!
Anchor fittings included with plinth:
4 × bolts DIN 571 (Ø × length)
mm
8 x 80
4 × rawl plugs (Ø × length)
mm
12 x 60
Both the machine and the plinth must be installed
according to the installation instructions provided.
Machine
version
WI
The machine must be firmly anchored to the floor!
Anchor fittings included:
4 × angled anchor brackets
4 × bolts DIN 571 (Ø × length)
mm
8 x 80
4 × rawl plugs (Ø × length)
mm
12 x 60
The floor must be solid and able to support the ma-
chine. The fittings included are suitable for a solid
concrete floor. Anchor bolts and fittings for other floor
types must be provided on site.
Machine
version
OS
The machine must be firmly anchored to the floor!
Fittings not supplied with machine.
Internal anchor thread
mm
12
Installation must comply with local requirements and
cater for on-site conditions. The machine is supplied
without feet to allow the interior thread to be used
with stay bolts.

Technisches Datenblatt / Technical datasheet: PW 6137 EL
Datum / Date: 12.10.2011 Seite / Page: 12
Machine data
Machine width
mm
804
Machine depth
mm
1005
Machine height
mm
1250
Casing width
mm
800
Casing depth
mm
910
Min. access width to installation site
mm
810
Recommended rear wall gap (measured to front of
machine)
mm
1350
Minimum wall gap (measured to rear of machine lid)
mm
400
Net weight
kg
340.6
Dynamic floor load, max.
N
4290
Static floor load, max.
N
3778
Dynamic load, max.
N
503
Drum frequency, max.
Hz
18,3
Average heat dissipation
(dependent on ambient room temperature and pro-
gramme selected)
W
1470
Sound pressure level (re 20 mPA),
workplace-related
(at distance of 1 m and height of 1.6 m)
dB (A)
69
Installation should only be carried out by authorised fitters in accordance with valid regulations!
Observe installation instructions when installing machine! All rights reserved! Dimensions in mm