Miele W 1113 Parts list manual

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010706
Product Dimensions
Large Capacity Washing Machine
Angled control
W1113
2"
23 1/2"
33 3/8" - 34 1/8"
22 1/2"
D
W
E
3 3/4" - 4 1/2"
21 1/2"
D -
E -
W -
5 foot flexible drain hose connects
upper left rear.
208-240 Volt - 15 Amp 5 foot 4-wire
(2 live / neutral / ground) molded plug
power supply connects upper right
rear (NEMA 14-30 Configuration).
5 foot separate flexible hot and cold
water intake hoses connect upper left
rear.
Location Codes
Notes
• All installations must be done in accordance with local codes
• See "Cut-out Dimensions" sheet for undercounter or built-in space requirements
• Optional Easy Installation Kits utilize existing 208-240 Volt - 30 Amp line to
connect two Miele machines without rewiring.
• Remove transport struts in rear of machine before installation.

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010706
Product Dimensions
Large Capacity Washing Machines
Flat controls - Decor Unit
W1119
2"
23 1/2"
33 3/8" - 34 1/8"
22 1/2"
5 7/8"
3 3/4" - 4 1/2"
1 1/2"
D -
E -
W -
5 foot flexible drain hose connects
upper left rear.
208-240 Volt - 15 Amp 5 foot 4-wire
(2 live / neutral / ground) molded plug
power supply connects upper right
rear (NEMA 14-30 Configuration).
5 foot separate flexible hot and cold
water intake hoses connect upper left
rear.
Location Codes
Notes
• All installations must be done in accordance with local codes
• See "Cut-out Dimensions" sheet for undercounter or built-in space requirements
• Optional Easy Installation Kits utilize existing 208-240 Volt - 30 Amp line to
connect two Miele machines without rewiring.
• Remove transport struts in rear of machine before installation.
Decor White
D
W
E

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010706
Cut-out Dimensions
Built-in Installations
Large Capacity Laundry Products
24"
See Notes
Water & Electrical
Connection
Location
C
32 3/8" - 35 1/4"
• Needed depth will vary by model number:
W1113: 24" minimum
W1119: 25" minimum
• Typically requires removal of unit's lid. Out of box unit height dimension without
lid is 32 5/16" - 32 11/16".
Notes
Location Codes
C - Cutout for Electric and Vent or Drain
pass-through. Adjust according to duct
or drain location.

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010706
5 1/2"
4"
7 1/2"
Existing
208 / 240 Volt
30 Amp
Product Dimensions
Easy Installation Kits
057B / 060B
Notes
• Connect Washer and Dryer to Easy
Installation Kit
• All installations must be done in
accordnace with local codes
• 057B Kit fitted with a NEMA10-30 Plug
• 060B Kit fitted with a NEMA14-30 Plug

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010706
Product Dimensions
Laundry Stand
WTS420 - White Only
26"
11"
Notes
• For use with both large and super
capacity washers or tumble dryers.
• All installations must be done in
accordnace with local codes
23 3/8"

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010706
Product Dimensions
Stacked Washer & Dryer
Example Combination
W1113 + T1302
2"
D
W
E
3 3/4" - 4 1/2"
23 1/2"
22 1/2"
66 3/8" - 67 1/8"
V
D -
E -
W -
5 foot flexible drain hose connects
upper left rear.
5 foot - 208-240 Volt - 15 Amp 4-wire
(2 live / neutral / ground) molded plug
power supply connects upper right
rear.
5 foot separate flexible hot and cold
water intake hoses connect upper left
rear.
Location Codes
Notes
• All installations must be done in accordance with local codes
• See "Cut-out Dimensions" sheet for undercounter or built-in space requirements
• Optional Easy Installation Kits utilize existing 208-240 Volt - 30 Amp line to
connect two Miele machines without rewiring .
• Remove transport struts in rear of machine before installation.
E

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010706
Panel Information
Integrated Laundry
W1119 Decor Unit
These units come equipped with a full size white front panel. These units are also designed to either accept a thin insert or
a custom front panel supplied by the custom cabinet maker.
Sizes are as follows: Version 1 - Thin insert
Width: 23 1/4" for all machines
Thickness: up to 1/8"
Height: 25" in all cases
With this version, a thin white frame will be exposed after
installation
Version 2 - Custom Front Panel
Width: 23 3/8" for all machines
Thickness: up to 3/4"
Height: Up to 25"
With this version, the existing front panel is removed and
replaced by the new custom panel
Miele
Decor
Laundry unit
Hinge Notches
In certain installations, notches will be required to
accomodate the hinges in the front panel.
Miele
Decor
Laundry
Control
Panel
To center lines
16 3/4"
Notch Pattern
For this installation, drill the following
pattern in the appropriate locations.
Note: To insure access to customer servicable features,
a minimum 4" toe kick above finished floor (AFF)
is required.
3 7/8"
C
C
C
1 1/8"
7/8"
1/4" Ø
1/4" Ø
1"
1"
Drill all holes
to a 5/8" depth
1 3/8" Ø