MIFRAM SECURITY MVB-3X User manual

MVB-3X
Assembly
Instructions
© All Rights Reserved to Mifram Ltd. 2018

Set of 6 MVB-3X

About the MVB-3X
•The MVB 3X is a third generation advanced and improved
version of the original Mifram MVB
•When assembled units vertical element is impacted, it
diverts the horizontal momentum into the air
•The placement of the MVB is crucial. The Pictures
demonstrate the correct orientation of the units
•The open side of the L shaped unit is the side to face the
threat and receive the impact
•Tested & Approved:

Deployment
Recommendations
•If Possible, deploy the MVB-3X where the
ramming car will be forced to approach at
a lower speed by using natural obstacles
like curves etc.
•Block sidewalks and the sides of the road.
•Use warning lights and signs.

Orientation of Elements
(Open side of L shape)
in direction of potential threat
MVB - 3X Deployment

Safety Warning
Note that several parts are heavy
(24 kg) and sharp.
pay attention during unloading,
assembling and packing
Elements Placed upright prior to
being joined can fall on their side
and create a hazard

The complete MVB-3X

MVB-3X Parts

R Pin

Handle

Rod &End Unit

MVB-3X, Handle, Rod
and End unit

Start on the left hand side

Pull out
the safety R pin

Pull out the
locking galvanized pin

Pull out the
locking galvanized pin

Lift the upper part

Lift the upper part

Insert the locking Galvanized
pin into the hole