Mightymast Leisure FLAMINGO User manual

1
FLAMINGO
TABLE FOOTBALL GAME
ASSEMBLY INSTRUCTIONS
Please keep for future reference
Adult Assembly Required
(0818)

2
ASSEMBLY INSTRUCTIONS
Please keep these instructions for future reference. Adult assembly required.
This table is not a toy & is intended for use by or under the supervision of adults.
Please do not sit, climb or lean on the table.
The table is intended for indoor use only.
1. Find a clean & level place to begin the assembly of your FLAMINGO table football game. You will
need a Phillips screwdriver & a hammer. Remove all parts from the box & save all packing materials
until the parts have been inspected & the table is assembled.
2. First attach the 4x legs – place the table upside down on the floor.
Rest a leg support over the leg bracket then push the leg through the hole in the leg support &
screw in the leg. Next secure the leg support with 4x silver screws. Once done screw in the 4x
adjustable height feet to the bottom of the legs.

3
3. Stand the table up on its legs & prepare to fit the poles. Push the bars into the table, placing the
handle-end of the pole through the hole first from the inside.
The score counters & players are in 2x different colours. In the case of the white FLAMINGO (as shown on
the front of these instructions) the colour combination is white & silver. Using this as an example, starting
from the silver score counters end of the table insert the poles as follows:
- Silver 1-man pole
- Silver 2-man pole
- White 3-man pole
- Silver 5-man pole
- White 5-man pole
- Silver 3-man pole
- White 2-man pole
- White 1-man pole
There should now be 4x poles on each side of the table with the 2x different coloured teams facing each
other. Refer to the picture on the front of these instructions to check the correct player formation.
4. Now fit the pole bearings as shown in the diagram below. At both ends of the poles fit 2x half moon
bearings with legs to the inside of the table & then 2x half moon bearings without legs to the outside
of the table. Secure with 1x black screw. Finally hammer on the handles to the end of the poles.
Now fit the black pole studs to the other end of the poles.

4
5. If not already fitted, attach the score cubes to the top of the ends of the table with the 4x long
screws provided. Also fit the 2x black plastic goal covers with the 8x black screws provided.
You are now ready to play
Cleaning & Maintenance
Use everyday household glass cleaner for both the glass & laminate surface.
Mightymast Leisure is the UK & Ireland agent for FAS Italian table football games
For sales & service contact:
Mightymast Leisure Ltd, 58 Bentwaters Park, Rendlesham, Woodbridge, Suffolk. IP12 2TW. UK
Tel: [phone]
www.mightymast.com
[e-mail]