Miho SDV-8560Q User manual

SDV-8560Q
User Manual
Please read the User Manual carefully before use.
Keep for future reference.

1
Content
Introduction................................................................................................ 2
Safety Instructions.................................................................................... 2
Important Functionality Precautions...................................................... 4
Federal Communications Commission (FCC) Compliance............... 4
Declaration of Conformity........................................................................5
Highlighted Key Features........................................................................ 5
Camera Views........................................................................................... 6
Accessories Views....................................................................................6
Getting Start...............................................................................................7
Charging the Battery................................................................................ 7
Memory Card (microSD Card)................................................................8
Installing the Mounts.............................................................................. 10
Reset........................................................................................................ 15
Basic Operation...................................................................................... 15
Power On and Off...................................................................................15
Working Modes....................................................................................... 15
Setup........................................................................................................ 17
System Setup Options........................................................................... 18
Function Setup Options......................................................................... 18
Video Mode Setup Options................................................................... 20
Photo Capture Mode Setup Options................................................... 20
Operation................................................................................................. 21
Video Recording..................................................................................... 21
Taking Still Photos.................................................................................. 21
Playback...................................................................................................21
Remote Control by Mobile App / Wi-Fi Connecting...........................22
“SportCam” APP Features Views.........................................................23
Download Videos/Photos to a PC........................................................29
Download from a Card Reader.............................................................29
Download Directly from Camera to a PC............................................29
View Photos/Videos on a HDTV.......................................................... 30
Specification............................................................................................ 30

2
Introduction
Congratulations on the purchase of your new Action Camera.
This manual contains important safety and operating information.
Please read all the information carefully before you use the device
to avoid accidents and keep it for future reference. Follow these
important safety and operation instructions.
Safety Instructions
READ ALL THE INFORMATION CAREFULLY BEFORE USING.
1. Neglecting of the below safety instructions may cause injury,
electric shock, fire or other hazards.
2. Never try to open the case of the camera or attempt to modify it in
any way. Maintenance and repair should be carried out only by
authorized service providers. Should repair is required, please
contact retailer directly.
3. Without proper mounting of waterproof case, the camera shall not
be exposed to dripping, splashing, raining, near or under water, or
any other similar circumstances where liquids may go into the
device, such as vases with water, shall not be placed over the
device.
4. Never place the device next to a heat source or flame, such as a
stove; nor place in high temperature places (over 40ºC); for
example, not place the device in a car which you leave it under
summer sun for a long time and its windows are closed.
5. In case liquids or foreign objects come into contact with the
device interior, immediately turn it off and then check and repair it by
a qualified technician and/or authorized service provider.
6. Use only the recommended power accessories. Use of power
sources other than recommended by the manufacturer or specified
in this manual for the device may lead overheating, distortion of the
equipment, fire, electric shock or other hazards.
7. Store this video camera out of reaching from Children or

3
Individuals with certain disabilities. Close supervision is necessary
when this device is used by, on, or near children or individuals with
certain disabilities.
8. Never operate this device if it has dropped, damaged, or dropped
into water without waterproof case proper installation, or if it is not
working properly. Return the appliance to retainer or exam and
repair by a qualified technician and/or authorized service provider.
9. Avoid dropping or subjecting the product to severe impacts.
Chips of lens, screen cracks or other broken fragments may cause
injury.
10. To avoid the risk of injury, do not touch the interior of the product
if it has been dropped or otherwise damaged.
11. Stop using the product immediately if it emits smoke, a strange
smell, or otherwise behaves abnormally.
12. Disconnect the device from the power source before cleaning.
Use only a dry soft cloth to clean this camera. Never use organic
solvents such as alcohol, thinner, etc. to clean the device.
13. Do not directly aim the video camera at bright light, such as sun,
otherwise it may damage image sensor.
14. Turn the camera off in places where camera using is prohibited.
The electromagnetic waves emit from the video camera may
interfere other electronic or other devices even the video camera is
already complied with relative standards, however, for example, it
may interfere working of cardiac pacemaker, may interfere flight
signal, please take special care when you are in this kind of places.
15. Never press the buttons too hard, it may damage the product.
16. Use the camera in an extreme low temperature environment
may cause battery only working a very short time.
17. Before photo/video taking, allow the camera to warm up and
achieve environmental temperature when move it from cold to warm
places.
18. Do not touch the camera lens.

4
19. This product is not intended for commercial use.
20. Disconnect the appliance from power supply and switch off the
device before cleaning.
Important Functionality Precautions
In order to prevent program failure, never disconnect the camera
from a PC while file transferring is in progress.
Federal Communications Commission (FCC)
Compliance
This equipment has been tested and found to comply with the limits
for a digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

5
Declaration of Conformity
This device complies with Part 15 of the FCC rules. Operation is
subject to the following conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including
interference that may cause undesired operation.
Highlighted Key Features
1. 4K Ultra HD (3840*2160, 30fps) Sports and Action Video
Camera.
2. Sony IMX179 8 Mega Pixels CMOS image sensor.
3. 2.0 inches high definition (960*240) LTPS TFT LCD display.
4. 60 M (meters) waterproof case
5. WiFi Remote Control by Mobile App and its maximum distance
up to 20 meters (65 ft) at open field without any blockage or
interference.
6. Real 130 degrees (FOV 130) 6G wide angle lens.

6
Camera Views
Accessories Views
1. Power/Shutter/OK Button
2. Working/Charging Indicator
3. Mode Button
4. Microphone
5. Lens
6. Micro HDMI Out Jack
7. Reset Hole
8. USB Jack
9. MicroSD Card Slot
10. WiFi/Down Button
11. Speaker
12. LCD Screen
13.Tripod Slot
13
10
11
12
5
1234
6
7
8
9
5
1234
6
7
8
9
Camera
Waterproof Case
Bike Mount
Helmet Mount
Extension Mounts
Sticker
Pads
USB
User Manual
AEE Mount
Heat Dissipation Cover

7
Getting Start
Charging the Battery
This Video Camera is operated by a lithium battery which is built-in
inside the housing. Before first use this Video Camera or when the
battery is in low power status, please correctly charge the battery as
per below steps:
1. Press and hold the “Power” button, turn the Video Camera off.
2. Connect the Video Camera to the one end of USB cable, then
connect another end of USB cable to a computer.
The camera screen shall display three icons: “USB Mode”, “PC
Camera” and “Charging Mode”.
Please press “WiFi” button to move cursor to “Charging Mode”, then
press “Power/Shutter” button of camera to enter charging mode.
3. When charging starts, the Charging Indicator will turn on in red
color and flicker continuously.
Note:
When charging starts, the Video Camera may switch on
automatically as the Video Camera includes a car camcorder
function (if the camera connected to a car charger it will be turned
on when car engine starts). In this case, please switch off the Video
Camera if you do not need this car camcorder “auto-on” function.
3.Once charging completes, the Charging Indicator will keep steady
in red color. Unplug the USB cable.
CAUTION:
If you choose to use a wall (car) charger output to USB for charging
of this video camera, it’s your responsibilities to make sure the
charger is properly approved/certified according to National
Standards, for example, in USA, certified by UL, ETL, etc.; and you
must make sure the charger’s output voltage and current is in line
with the specification mentioned on the rating label of this camera,
which is affixed on bottom of camera and near Tripod Slot.

8
BE CAREFUL. NON-CERTIFIED CHARGERS OR CHARGERS
DELIVER IMPROPERLY POWER OUTPUT TO THIS CAMERA
MAY DAMAGE THE VIDEO CAMERA, OR CAUSE OTHER RISKS
AND/OR INJURIES.
Note:
It is normal if the Video Camera housing get hot during charging
process.
Memory Card (microSD Card)
A Micro SD card shall be inserted into this Video Camera before
taking photos and/or videos as the internal memory of this Video
Camera are designed for firmware only.
This Video Camera supports only Micro SD card which speed class
rating is equal or higher than Class 4. This Video Camera also
supports microSDHC and microSDXC cards, however, please take
kind attention, the maximum memory can be supported by this
camera is 64GB.
To insert memory card:
1. Turn the Video Camera off by press and hold the “POWER”
button.
2. Insert memory card into memory card slot with label facing front,
which is showing as per below illustration. You will hear a “click”
sound if the memory card has been inserted into the Video Camera
successfully.

9
To remove memory card:
1. Turn the Video Camera off by press and hold the “POWER”
button.
2. Depress edge of memory card slightly by using fingernail, then
memory card will pop-up from slot.
Note:
1) Must use at least Class 4 or higher speed rate TF card. Please
use above Class 10 TF card when recording video in
2.7K@30fps/ 3.2K@30fps/ 4K@30fps.
2) Make sure the Video Camera is turned off before inserting or
removing the card.
3) Please format the TF card before using.
4) Using poor quality or counterfeit memory card will lead
problems such as crashing, cannot take photo or video,
damaging the files, etc. Suggest to use brand name memory
cards to keep reliabilities and stabilities, for example, Sandisk,
Kingston, etc.
5) Keep TF card clean. Do not adhere any particles on the surface
of card.

10
Installing the Mounts
When you at a circumstances where it is rain, underwater, liquids
splashing, near or among sanding and/or dirt/dust, etc., you should
put the Video Camera into waterproof case to protect it.
When you at a circumstances where it is out of risks mentioned
foregoing, you may directly install the Video Camera on the mounts
or use waterproof case with replaceable Heat Dissipation Cover to
improve recording quality of sounds.
Open/Close Waterproof Case Backdoor
For security purpose, the waterproof case
built with 2 latches (# 1 & #2 as below
illustration). To open the backdoor, you
should slide latch #1 down and then push
latch #2 backward; to close it, you should
lock the backdoor properly by latches then
push latches forward until both latch lock
well, you can hear a “Click” sound.
CAUTION:
1) Before close the backdoor, carefully check and make sure
there is nothing extra sticking on rubber seal of backdoor and
camera housing. A single hair or a grain of sand will cause
water leakage and damage your camera.
2) Before use, make sure backdoor closes and locks well.
3) To prevent corrosion on waterproof case and its rubber seal,
after each use in salt water, put waterproof case into clean
container with clean tap water for half an hour and then rinse
the waterproof case for a while to remove salt thoroughly. Then
air dry it or dry it by a cloth.

11
BE CAREFUL AFTER DRYING AND BEFORE CLOSE THE
BACKDOOR, PLEASE MAKE SURE NO ANYTHING STICKING
ON RUBBER SEAL OR HOUSING. NO WARRANTY COVERS
DAMAGES CAUSED BY ERROR OPERATION.
Replace Heat Dissipation Cover
1) Open the backdoor of waterproof case.
2) Pull backdoor towards the direction where there are openings
on the hinge until the backdoor out of hinge.
3) Snap Heat Dissipation Cover into hinge opening until it
securely locks into hinge.

12
Waterproof Case to Helmet Mount
Waterproof case can be directly installed to “Helmet Mount” as per
below illustration.
Waterproof Case to Bike (Handle Bar/Seat Post) Mount
Waterproof case can be directly installed to “Handle Bar/Seat Post
Mount”as per below illustration.

13
To extend the distance, you may add any of or all of below Mounts
between waterproof case and “Bike (Handle Bar/Seat Post) Mount”
or “Helmet Mount”.
or/and
or/and

14
To adjust the mounting angle, you may use “Mount Adaptor” (one of
the extension mounts), a 90

angle can be adjusted.
or/an
or/and

15
Reset
During operation, in case the Video Camera encounters any
abnormal function, use a pin insert into “RESET” hole and press it,
the Camera will recover to its normal conditions.
Basic Operation
Power On and Off
1. Press the “Power/Shutter” button，the camera will power on; the
work indicator flickers two times and then goes on in blue color.
2. Press and hold the “Power/Shutter” button, the camera will
power off; the work indicator flickers two times and then goes off.
Note:
Power saving function is default in 3 minutes, the Video Camera will
power off automatically after 3 minutes (you may change the setting,
please refer to below chapters).
Working Modes
After power on, the camera enters “Video Capture” Mode.
8
6
5
4
3
2
1
7
2016/06/13 13:07:04
14G
1080P60FPS
1. Video mode
2. Resolution
3. Memory card capacity
4. TF card inserted
5. WiFi
6. Battery capacity level
7. Recording sound on
8. Date&Time

16
Press “MODE” button once, the camera enters “Photo Taking”
mode.
Press “MODE” button twice, the camera enters “Slow Motion
Capture” mode.
Press “MODE” button the third time, the camera enters “Playback”
mode.
1. Capture mode
2. Resolution
3. Memory card capacity
4. TF card inserted
5. WiFi
6. Battery capacity level
7. Date&Time
6
5
4
3
2
8M
14G
2016/06/13 13:07:04
1
7
2
3
4
5
6
720P90FPS
14G
2016/06/13 13:07:04
1
7
8
1. Slow motion mode
2. Resolution
3. Memory card capacity
4. TF card inserted
5. WiFi
6. Battery capacity level
7. Recording sound off
8. Date&Time
1. Playback mode
2. The number of
current file/The total
numer of files
3. Battery capacity level
3
2
1
00001/00034

17
Press “MODE” button the fourth time, the camera enters “Setup”
mode.
Press “MODE” button the fifth time, the camera returns to “Video
Capture” mode.
Setup
1. Power on the camera.
2. Press “MODE” button and enter “Setup” mode of the camera.
3. Press “OK” button, the camera enters into Setup Interface as
below:
4. Press “MODE” button, the cursor will move from left to right one
by one and then return back to left directly from the far right.
5. Press “WiFi” button, the cursor will move from top to bottom
one by one and then return back to top directly from the far
bottom.
6. Press “OK” button to confirm your setting.
Note:
To exit “Setup”, move cursor to the icon “ ”, then press “OK” button.
Video Resolutio 1080P 60FPS >
Close >
Close >
720P 90FPS >
Recording Sound
Time-lapse
Loop Recording
Slow Motion
1. Video mode
2. Setup mode
3. Capture mode
4. Function setup
5. System setup
6. Exit
6
5
4
3
1
2

18
System Setup Options
Menu
Definitions
Options
Language
Set OSD
(on-screen)
language.
【English】/【German】/【French】
/【Italian】 /
【Spanish】
/
【Dutch】
/【Portuguese】
Date-Time
Set the date
and time.
The date/time is in format of
【YYYY/MM/DD/HH/MM/SS】.
Format
Format your TF
card.
【Confirmation】/【Cancel】
Note: Format TF card will delete
all files including the protected
files. Please copy the important
files before confirm.
Reset to
Factory
Settings
Restore the
setup to factory
default settings.
【Confirmation】/【Cancel】
Firmware
Version
Firmware info
displaying.
Information only, no options for
end-user’s operation.
Function Setup Options
Menu
Definitions
Options
Exposure
Set the exposure value
to compensate light.
Solve the problems of
shooting under poor or
strong light.
【-3】/【-2】/【-1】/
【0】/【1】/【2】/【3】
White
Balance
Set the white balance
to adapt to different
light sources.
【Auto】/【Sunny】/
【Cloudy】/
【Incandescent Light】
/【Fluorescent Light】

19
Image
Rotation
180overturn of
screen displaying and
video/photo capture. It
is convenient as a car
recorder on a
windshield.
Press the 【OK】
button to activate or
deactivate it.
Driving
Mode
Open/Close the
function of driving
recorder.
Press the 【OK】
button to activate or
deactivate it.
WiFi
Turn WiFi function on
or off.
Press the 【OK】
button to activate or
deactivate it.
Light Source
Frequency
Set the light source
frequency to match
frequency of electricity
supply in local region
to prevent
interference.
【Auto】/【50Hz】/
【60Hz】
LED
Indicator
Light
Open/Close the
working indicator light.
Press the 【OK】
button to activate or
deactivate it.
Auto
Screensaver
Set the time to shut
screen for power
saving. When you play
video back on camera
screen, please “Close”
this function.
【Close】
/
【10s】
/
【20s】
/【30s】
Auto
Shutdown
Set the time to shut
down the Camera for
power saving if the
camera is idle.
【Close】/【1minutes】
/【3minutes】/
【5minutes】
Time
Watermark
To mark the date and
time on photos and
videos.
Press the 【OK】
button to activate or
deactivate it.