milliard Art Table User manual

Art Table
Congratulations on the purchase of your Art Table
PRECAUTION:
Always read and follow instructions before use | Always use the unit according to the
manufacturers guidelines | Only use the unit in a manner as intended by manufacturer.

Our team of dedicated customer care professionals are ready to help you with
any questions or concerns you may have.
For immediate attention, call Monday-Thursday 9:00am-5:00pm & Friday
9:00am-1:00pm.
Or you can leave us a voice message or email, and we guarantee you will hear
back from us within one business day.
Phone: [phone]
Email: [email protected]
Did your Art Table come with any damaged or missing parts?
WE’RE HERE TO HELP
WARNING: CHOKING HAZARD - SMALL PARTS NOT
FOR CHILDREN UNDER 3 YEARS.
THIS PRODUCT IS TO BE ASSEMBLED BY AN ADULT. IN
ITS UNASSEMBLED STATE THIS PRODUCT CONTAINS
POTENTIALLY HAZARDOUS SHARP POINTS, SHARP EDGES,
AND SMALL PARTS. KEEP OUT OF REACH OF CHILDREN.
DO NOT STAND ON THE ART TABLE
DESIGNED FOR USE BY CHILDREN AGES 3-10
!
MAINTENANCE:
To upkeep the unit, periodically dust and wipe it with a damp cloth. For more
extensive cleaning, use a mild wood cleanser and a soft cloth.
DISCLAIMER: MILLIARD™ ASSUMES NO LIABILITY OR RESPONSIBILITY FOR ACCIDENTS OR INJURIES TO PERSONS OR
PROPERTIES ASSOCIATED WITH THE IMPROPER USE OF THIS PRODUCT, NOR DOES MILLIARD CONDONE PROHIBITED OR
UNLAWFUL USES. THIS PRODUCT MUST BE USED AS DIRECTED AND ALL SAFETY PRECAUTIONS MUST BE FOLLOWED AT ALL
TIMES IN ACCORDANCE TO FEDERAL AND LOCAL LAWS OR REGULATIONS. BUYER ASSUMES ALL RISKS AND LIABILITY FROM
MISUSE OF THIS PRODUCT AND MILLIARD SHALL NOT BE HELD LIABLE BEYOND THE INITIAL PURCHASE COST OF THE PRODUCT
FOR ANY DAMAGES ARISING FROM ITS MISUSE.
KEEP HANDS AWAY WHEN THE TABLE TOP
IS OPENING OR CLOSING

CHAIR PARTS
TABLE PARTS
1
Left Chair
Side ×2
6
10
14
17
21
22
23
18 19
20
15 16
11 12 13
Left Table Leg
7
Table End
8 9
Right Table Leg Left Side Panel
Right Side Panel
Shelf Right Side
Bottom Shelf
Upper Shelf Back
Table Top
Cup Holder Panel
Rails x2 Bottom Shelf Back
Shelf Top
Shelf Left Side Middle Shelf
Center Support Easel End
Support
Table Bottom
Right Chair
Side ×2
2
Seat Back x2
3
Seat x2
5
Seat Support x4
4

HARDWARE
Dowel Nut x36
Long Bolt x6
Short Bolts x6
A
E
I
Medium Bolt x30
Flathead Screw x6
Short Round Head
Screw x12
Pneumatic Piston
x2
B
F
J
M
Wooden Dowel x30
Cam Nut x10
Short Flathead
Screw x16
Hex Key
C
G
K
N
Round Head
Screw x2
Cam Screw x10
Hinge x2
D
H
L
24
28
25
29 30 31
26 27
Canvas Holder x2
Cup x5
Rod
Storage Bin x6 Bin Insert x6 Paper Roll
Rod Support x2 Knob x4

Insert wooden dowels into
each of the six shallow holes
on the left chair side .
Start by assembling the chairs.
Insert a dowel nut into the hole
on the seat and attach it to the
left chair side with a medium
bolt .
Insert dowels nuts into the
holes on the seat back and seat
supports and attach them using
medium bolts .
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 3
STEP 2
1
C
A
A
B
3
4
5
1
B
x6
x1
x1
x2
x3
x3
C
1
1
3
4
A
B
B
A
5

STEP 4
STEP 6
Insert wooden dowels into
each of the six shallow holes
on the right chair side .
Place dowel nuts into the
table end .
Insert dowels nuts
into the holes of the seat
back , seat and seat
supports and attach
the right chair side with
medium bolts .
2
C
A
3
4
2
B
A
7
5
x6
x5
x4
x2
x2
C
2
2
7
3
5
4
B
A
A
STEP 5
Now, let’s assemble the table.

Attach the left and right side panels to the center support
and the easel end support using medium bolts .
STEP 7
STEP 9
Let’s attach the left and right
table legs to the table end
by inserting long bolts .
• Place dowel nuts and
wooden dowels into the
center support .
• Insert dowel nuts into the
easel end support .
6 8 7
E
A
A
C
11
910 11
12 B
12
x2
x6
x6
x2
E
STEP 8
6
11
A
B
C
12
7
8
9
10
11
12

STEP 10
Slide the table bottom into the slots on side panels until it
fully rests in the slot on the easel end support . Make sure that
the indented corners are facing the open side.
• Insert dowel nuts into the side panels .
• Attach, previously constructed legs , to the table
base and secure them with long bolts .
13
13
A
E
9
6
10
7 8
12
910
10
12
9
STEP 11
10
9
6
7
E
A
8
x4
x4

Place dowel nuts into the middle
and bottom shelves .
Slide in the bottom shelf back .
Attach the middle shelf using
medium bolts .
Attach the right and left shelf
sides to the bottom shelf
using medium bolts .
STEP 12
STEP 14
16
17
17
A
16 17
14 15
16
17
19
B
B
STEP 13
STEP 15
x8
A
15
B
14
19
16
x4
Bx4

STEP 16
STEP 18
Slide in the upper shelf back .
Make sure that the indented corners
are facing up/the open side.
• Turn the shelf unit upside
down.
• Attach the rails on top
of the middle and bottom
shelves , on the
front edge, with athead
screws .
• Insert cam nuts into the right
and left shelf sides .
• Insert cam screws into the
shelf top .
• Attach the shelf top to the shelf
sides by turning the cam
nuts clockwise 90 degrees.
21
G
14 15
H
20
20
14 15
G
18
16 17
F
21
STEP 17
20
15
17
16
14
G
18
H
x4
x2
x4
x6
F

STEP 19
• Attach the table top to the cup holder panel by inserting
small screws into each hinge .
• On the table top , insert cam screws into each middle hole
and wooden dowels in the outer holes.
With the shelf unit still upside-down, insert the protruding ends of
the partially constructed table through the openings in the back
of the shelf unit and secure with short bolts on each side as
shown.
I
22
22
23
J L
H
C
STEP 20
Ix6
Now, let’s assemble the tabletop.
22
23
x12
x4
x2
x2
J
C
C
L

• Insert the paper roll onto the rod .
• Attach the rod to the rod support using a round head
screw .
STEP 21
• Insert cam screws into the holes on the cup holder
panel as shown.
• Insert a cam nut into the smaller hole of one of the rod
supports and secure it to the table top by turning the
cam nut clockwise 90 degrees.
H
31 25
25 26
D
G
G
26 22
23
G
22
x1
x1
x4
23
H
26
26
D
31
25
STEP 22

22
Gx1
x1
D
• Insert cam nuts into holes on the inside of table
compartment where shown.
• Attach the cup holder panel to the top edge of table
compartment and secure it by turning the cam nuts
clockwise 90 degrees.
• Attach the rod to the second rod support using a round
head screw .
• Insert a cam nut into the other rod support and secure
it to the table top by turning the cam nut clockwise 90
degrees.
STEP 23
G
G
G
G
26
22
25 26
D
23
26
STEP 24
Gx4
23

STEP 25
Attach the protruding side of the pneumatic pistons to the
underside of the desktop with short athead screws .
Attach the at side of the pneumatic pistons to the inside of the
side panels with short athead screws .
M
M
22 K
K
K
M
M
x6
x2
x2
x10
STEP 26
910
K
10
9

STEP 27
Gently attach the canvas holder strips to the table top
with the knobs .
• Finally, place the cups in the cup holders.
• Insert the bin inserts into the bins and place the bins
onto the storage shelves.
24 22
27
28
29
30
27
24
22
x4
x2
STEP 28
28
29
30
x5
x6
x6
Now, let’s make some art together!