milliard ROUND TABLE & 4 STOOLS User manual

for kids!
PRODUCT MANUAL
ROUND TABLE
4 STOOLS

Milliard Enterprises LLC
1980 Swarthmore Ave
Lakewood, NJ 08701 USA
MADE IN CHINA
Congratulations on the purchase of your new Milliard Round Table with
Stools! Now your kids have their own furniture to work and play on, as well
as spill, paint and, of course, eat. It’s sized just for them, with lots of storage
space to hold all their treasures where no grownups are allowed, and you
can rest easy that your family’s heirloom furniture in the rest of the house
is safe. Win – win for everyone! Enjoy Milliard products and be sure to
check out our other great items!
DISCLAIMER: Milliard™ assumes no liability or responsibility for accidents or injuries to persons or properties
associated with the improper use of this product, nor does Milliard condone prohibited or unlawful uses. This
product must be used as directed and all safety precautions must be followed at all times in accordance to federal
and local laws or regulations. Buyer assumes all risks and liability from misuse of this product and Milliard shall not
be held liable beyond the initial purchase cost of the product for any damages arising from its misuse.
Did your product arrive damaged or missing parts?
WE’RE HERE TO HELP.
Our team of dedicated customer care professionals are ready to help you
with any questions or concerns. For immediate attention, call us.
Or you can leave a voicemail or email and we guarantee you will hear back
from us within one business day.
PHONE: [phone] EMAIL: [email protected]
WARNING: REVIEW ALL WARNINGS AND INSTRUCTIONS TO
REDUCE THE RISK OF SERIOUS INJURY OR DEATH.
The table and chairs must be assembled by an adult.
Carefully inspect the table and chairs after assembly to ensure that they
are stable and that there are no exposed screws or other sharp parts.
To avoid falls or strangulation, do not place the table near a window or a
corded window treatment.
Do not allow children to climb on the table. The table may tip over or
break, which could lead to serious injury or death.
To avoid choking hazards, do not allow children under the age of three to
play with toys that contain small parts.
!

1
10” STOOL PANEL
LEFT (X4)
2
10” STOOL PANEL
RIGHT (X4)
3
STOOL BOTTOM
(X4)
4
5” STOOL PANEL
CENTER (X4)
A
BOLT (X36)
B
DOWEL NUT (X36)
C
WOOD DOWEL
PEG (X32)
D
HINGE (X8)
E
SHORT SCREW (X32)
F
LONG SCREW (X20)
G
STOOL PAD (X16)
H
BRACKET (X2)
I
CAM LOCK (X24)
J
CAM NUT (X24)
K
MEDIUM SCREW (X20)
L
TOOL (X1)
5
5” STOOL PANEL
RIGHT (X4)
6
5” STOOL PANEL
LEFT (X4)
7
STOOL TOP
(X4)
8
UPPER TABLE
SUPPORT (X2)
PARTS
9
LOWER TABLE
SUPPORT (X2)
10
TABLE LEGS (X4)
11
TABLETOP (X1)

ASSEMBLY
1
Begin by assembling the stools.
Take one of each 10” stool panel (1) and
(2). Into the right stool panel (1), insert
dowl nuts (B) into the holes on the wide
sides and wood dowel pegs (C) into the
inner holes on the narrow sides. Attach
the left stool panel to the right stool
panel by inserting bolts through the
holes on the outside of the left stool
panel.
A
C
B
1
2
2
Now you will attach the stool bottom (3).
Begin by inserting 3 dowel nuts (B) into
both the right and left stool panels, as
shown. Insert wood dowel pegs (C) into
the holes in the stool bottom that do not
go through and through.
Then turn the whole unit upside down
and insert 3 bolts (A) into the holes in
the stool bottom.
A
C
B
3
3
In this step you will
assemble the stool front.
Line up one of each center,
right and left 5” panels (4,
5, and 6) and attach them
to each other using 2
hinges (D) and 8 short
screws (E).
E
D
5
4
6

ASSEMBLY
4
Now you will attach the set of
5” panels to the stool bottom
using 3 long screws (F).
5
Secure the 5” stool panels to
the 10” stool panels using
another long screw (F) on
each side.
6
Attaching the stool top (7).
Insert 3 cam locks (I) into the stool sides
and 3 cam nuts (J) into the corresponding
holes on the stool top. Insert wood dowel
pegs (C) into the remaining 2 holes in the
stool top.
Make sure that the arrows on the cam
locks are facing downwards. To lock each
cam lock, turn each one clockwise 90
degrees.
7
Attach 4 stool pads
(G) using the
medium screws
(K).
FF
J
C
I
7
K
G
Repeat steps 1-7 for the remaining 3 stools.

ASSEMBLY
8
Now begin assembling the table.
Wedge the upper table supports (8) into each other and the lower table
supports (9) into each other.
Note: the upper table supports have holes along the long edge for
connecting to the tabletop; the lower table supports have holes in the
center for attaching brackets.
9
Attaching the table legs (10) to the table supports.
Note that the holes on the table legs are closer to the edge on one end.
This is the end that should connect to the upper table supports. Insert
dowel nuts (B) into all the holes on the wide side of the table supports.
Insert bolts (A) into all the holes on the wide sides of the table legs and
screw them in.
8
8
9
9
A
10
10
10
10
B

ASSEMBLY
10
Attach the brackets (H) on
opposite sides of the lower table
supports using short screws (K).
As mentioned in step 8, the lower
table supports have bracket holes
in the center.
11
Now it is time to attach the tabletop (11).
Insert cam locks (I) into the holes in both
the upper table supports and the tops of
the table legs. Make sure that the arrows
on the cam locks are facing downwards.
Insert cam nuts (J) into the correspond-
ing holes on the tabletop. Attach the
tabletop to the table support and turn
each cam lock clockwise 90 degrees.
J11
I
H
K
You are done! Great job!

PHONE: [phone]
EMAIL: [email protected]