RiverRidge 02-075 User manual

ASSEMBLY INSTRUCTIONS
RiverRidge® Kids Storage Stacker
with Veggie Bin/2 Cubbies
ITEM #: 02-075 White
ITEM #: 02-076 Navy
ITEM #: 02-077 Turquoise
ADULT ASSEMBLY REQUIRED
This product requires assembly by an adult because of the small parts. Care should be
taken in unpacking and assembling this item to keep the small parts away from children.
WARNING
Young children can be seriously injured or killed, if furniture tips over.
Don’t use this item for a TV stand.
Use angle-braces or anchors to secure furniture to the wall.

WARNING: EACH STORAGE STACKER WILL HOLD UP TO 25 POUNDS PER VEGGIE BIN/
CUBBY. DO NOT LOAD EACH VEGGIE BIN/CUBBY WITH MORE THAN 25 POUNDS. THIS MAY
CAUSE DAMAGE TO THE STORAGE STACKER AND MAY CAUSE SERIOUS INJURY OR DEATH.
Send requests for missing or damaged parts replacements by email to :
[email protected] or call toll free 1-(844)-223-5201 or order parts on line at
www.riverridgehome.com

PARTS LIST
CAM BOLT
CAM LOCK
SCREW 4x35mm
SCREW 3x12mm
PLASTIC LOCK STRAP
CONNECTOR BRACKET
PLASTIC ANCHOR
NO PARTS QTY DESCRIPTION
A20PCS WOOD DOWEL
10PCS
10PCS
9PCS
2PCS
5PCS
2PCS
1PC
1PC
B
C
D
E
F
G
H
I
ANCHOR BRACKET

1
2
3
4
5
6
7
8
1PC
1PC
1PC
1PC
1PC
1PC
1PC
1PC
NO QTY
PARTS DESCRIPTION
RIGHT SIDE PANEL
LEFT SIDE PANEL
RIGHT DIVIDER
LEFT DIVIDER
BACK BOARD
TOP BOARD
BOTTOM BOARD
FRONT BIN PANEL
TOOLS NEEDED FOR ASSEMBLY : FLAT & PHILIPS SCREWDRIVER(NOT INCLUDED)
THE USE OF POWER SCREWDRIVER IS NOT RECOMMENED

B
STEP 1
STEP 2
A
A
A
A
A
A
B
A
A
1. Insert 4 wood dowels (A) into the wood dowel holes on the edges of front bin panel (1).
1. Insert 4 wood dowels (A) into the wood dowel holes on the edges of right divider (2).
2. Screw 1 cam bolt (B) into the pre-threaded hole on the right divider (2).

B
STEP 3
STEP 4
C
B
B
A
A
A
A
1. Insert 4 wood dowels (A) into the wood dowel holes on the edges of left divider (3).
2. Screw 1 cam bolt (B) into the pre-threaded hole on the left divider (3).
C
1. Attach the front bin panel (1) to right divider (2) by inserting the wood dowels into the wood
dowel holes on the right divider (2) and inserting the cam bolt (B) into the cam lock hole
on the front bin panel (1).
2. Insert 1 cam lock (C) into the cam lock hole on the front bin panel (1), then rotate clockwise to
secure the cam bolt (B) in place.
3. Repeat the above steps #1-#2 to assemble the front bin panel (1) to the left divider (3).

STEP 5
STEP 6
A
A
A
A
A
A
A
A
1. Insert 4 wood dowels (A) into the wood dowel holes on the edges of right side panel (4).
1. Insert 4 wood dowels (A) into the wood dowel holes on the edges of left side panel (5).

B
STEP 7
STEP 8
D
D
D
D
D
D
D
B
B
B
B
B
B
B
B
D
1. Screw 8 cam bolts (B) into the pre-threaded holes on the top board (7).
1. Attach the bottom board (6) to pre-assembled left side panel (5), left divider (3) and pre-assembled
right side panel (4), right divider (2) by inserting the wood dowels into the wood dowel holes on the
bottom board (6).
2. Insert 8 screws (D) through the holes on the bottom board (6) then tighten it to pre-assembled
left side panel (5), left divider (3) and pre-assembled right side panel (4), right divider (2).

STEP 9
STEP 10
CCC
C
G
F
C
C
C
C
1. Attach 1 anchor bracket (G) to the back side of top board (7) by inserting 1
screw (F) through the hole on anchor bracket (G) then tighten to the top board (7).
1. Slide the back board (8) into the grooves on the left side panel (5), right side panel (4) and bottom
board (6).
2. Attach the top board (7) to pre-assembled left side panel (5), left divider (3) and pre-assembled right
side panel (4), right divider (2) by inserting the wood dowels into the wood dowel holes on the top
board (7) and inserting the cam bolts into the cam lock holes on the left side panel (5), left divider (3),
right side panel (4) and right divider (2).
3. Make sure the back board (8) is also in the groove on the top board (7).
4. Insert 8 cam locks (C) into the cam lock holes, then rotate clockwise to secure the cam bolts (B) in
place.

STEP 11
GH
D
I
WALL
1. Drill a hole on the wall where you want to place the storage stacker.
2. Insert the plastic anchor (I) into the hole on the wall.
3. Attach 1 anchor bracket (G) to plastic anchor (I) by inserting 1 screw (D) through the hole on
the anchor bracket (G) then tighten to the plastic anchor (I).
4. Place the back side of the storage stacker against the wall, close to the bracket (G) that in fixed on
the wall.
5. Insert plastic lock strap (H) through the hole on the anchor bracket (G) that is assembled on the
storage stacker, then through the hole on the anchor bracket (G) on the wall. Fasten the plastic lock
strap (H) to the 2 anchor brackets (G) firmly.

STEP 12
E
E
F
F
F
F
IGH
D
1. If you have more than one storage stackers, you can use 2 connector bracket (E) and 4 screws (F)
to connect them.
2. Then use the anti-tip hardware (D,G,H,I) to attach the storage stackers to the wall.
3. Secure storage stackers to the wall at the top to ensure no tipping.
4. Do not stack more than 3 storage stackers together.
WALL

ENJOY YOUR NEW RiverRidge® KIDS
STORAGE STACKER WITH VEGGIE BIN/2 CUBBIES
Attention Adults: The shelf should be checked periodically for damage or loose screws/parts.
Take appropriate action necessary to correct the hazard such as tightening of screws and taking
any damaged parts away from children.
Thank you for purchasing this RiverRidge® Kids Products item. We hope you enjoy it, and
consider purchasing other RiverRidge® items.
Send requests for missing or damaged parts replacements by email to :
[email protected] or call toll free 1-(844)-223-5201 or order parts on line at
www.riverridgehome.com
RiverRidge® is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016.