Milwaukee M18 FNCS18GS User manual

M18 FNCS18GS
Original instructions

2 3
STOP
18
10
12
6
8
4
14
11
9
20
Text section with Technical Data, important Safety and
Working Hints and description of Symbols

4 5
1
1
2
2
click
78-100 %
55-77 %
33-54 %
10-32 %
< 10 %
Remove the battery pack
before starting any work on
the machine.

6 7
1
2
3
click
1
2

8 9
Single Sequential Actuation
Contact (Bump) Actuation
Switching on-off
Press and hold the power button for 2
seconds.
2 sec
Low Battery LED
If the red light will on, the battery is low.
The tool will not be able to fi re nails. To
continue work, charge the battery.

10 11
1
2
9 sec

12 13
1
clack
Switch to single sequential actiation:
Press MODE Button - LED will light.
Push the tool against the work surface,
compressing the workpiece contact.
Pull the trigger to drive the fastener.
Switch to Contact Actuation:
Press MODE Button - LED will light.
Pull and hold the trigger
Push the tool against the work surface,
compressing the workpiece contact to drive
the fastener.
1
2
3
2
3
Single Sequential Actuation Contact (Bump) Actuation

14 15
1
3
25
6
4
Retract a dropped striker.

16 17
9
8
7
11
10

18 19
1
2