Milwaukee 58-01-0646 User manual

WIRING INSTRUCTIONS
58-01-0646
2-
Wires routed under switch
WIRE FORMING AND
SOLDER DETAIL FOR
BRUSH HOLDER CLIP Wires routed on top of switch
NOTE:
All leads must be held to 2 l/8”.
All field leads to be measured from
and perpendicular to laminations.
All lead lengths are before stripping.
TERMINAL DESCRIPTION
Code Part No. Qnty.
TZ 23-74-0390 1
CONNECTOR DESCRIPTION
Code Part No. Qnty: