Mimitakara goHearing R3 User manual

User Guide
goHearing R3

WELCOME
YOUR HEARING DEVICE
ACCESSORIES
FEATURES
HOW TO RECHARGE
GETTING STARTED
REPLACING EARBUDS
PAIR AND CONNECT
CONTROL YOUR HEARING DEVICE
SAFETY AND MAINTENANCE
WARRANTY
TROUBLESHOOTING
ADDITIONAL INFORMATION
................................................ P1
.............................. P2
.......................................... P3
............................................... P4
.................................. P5
.................................... P8
.................................P9
..................................P10
...............P15
...................... P22
............................................ P24
..................................P25
.........................P27
Content

1
WELCOME
Thank you for choosing our hearing devices to
accompany you through everyday life.
Like anything new, it may take you a little time to
become familiar with them.
This guide will help you understand the advantag-
es and greater quality of life your hearing device
oer. To receive the most benet from your
hearing device, it is recommended that you wear
them evey day, all day.
This will help you get adjusted them.
CAUTION
It is important to read this user guide thoroughly
and completely. Follow the safety information to
avoid damage or injury.
The devices are not intended for children under
the age of 3 years or people with a developmental
age of under 3 years.

2
YOUR HEARING DEVICE
Your hearing devices are Mimitakara
RIE (Receiver-in-Ear) Rechargeable models
Device: goHearing R3
The goHearing R3 connect to iPhone, iPad, or iPod
touch so you can stream audio, answer phone
calls, adjust settings, and more.
To use the goHearing R3, you need one of these
devices:
iPhone 5 or later
iPad Pro (all models)
iPad Air (all models)
iPad (4th generation) or later
iPad mini (all models)
iPod touch (5th generation) or later

3
ACCESSORIES
Recharging Case x1
Hearing Aid x2 (Right & Left)
Earbuds: Single (Mini / Small / Large / Medium
on the unit) x2, Double (Small / Medium /
Large) x2
Cleaning Brush x1
AC Adaptor x1

4
FEATURES
Earbud (M)
Receiver
Microphone
AC Charging
Port
Recharging Case
Cleaning
Brush
AA Battery Charger
(Battery not included)
Red – Right Ear
Blue – Left Ear
Battery /
AC Power
Indicator
Status Button
Charging Status Indicator
On / O Switch

5
HOW TO RECHARGE
※Make sure to fully charge the devices before
rst use. The charging time is 4 hours. This is to
awake all functions of the devices and extend
your battery life. (Make sure your hearing aids
are switched “OFF” while charging.)
A) AC Charging
Carefully put hearing aids in the recharging case.
Make sure the charging connectors on the bottom
of the hearing aid is in contact with the charging
pins of the case. Connect the adaptor to the
recharging case. Plug the adapter into the wall
socket.

6
B) AA Battery Charging
Step 1: Carefully put it in the recharging case.
Make sure the charging connectors on the bottom
of the hearing aid is in contact with the charging
pins of the case.
Step 2 : Place a AA battery(not included) inside the
battery charger of the recharging case. Make sure
the negative pole of the battery (-) is in contact
with the charging spring in the battery compart-
ment.

7
C) Charge Status
Battery/AC Power
Indicator is Green
Battery/AC Power
Indicator is Orange
Battery/AC Power
Indicator is not lit
Charging Status
Indicator is Green
The hearing aids are
charging normally.
Input power is sucient.
Input power is low.
Insert new AA battery or
use the AC adapter.
Charging Status
Indicator is not lit
The charge is complete.
Place hearing aid in
charging case improperly.

88
GETTING STARTED
Make sure your ears are clean.
Rest your hearing aid
securely on your ear .
Turn the Hearing Aid
power on.
Place the earbud inside the ear canal
until it sits soundly and comfortably
with a tight seal in your ears.
Make sure the earbud tips t your
ears (change the earbud size if it’s
too tight or too loose).
ON

99
We provide additional earbuds of dierent size to
suit your need.
To replace the earbud:
Step 1. Hold the earbud.
Step 2. Gently pinch the earbud and pull to
remove it. Once the earbud is removed, you will
see an axis.
Step 3. Pick the replacing earbud. Align the
central hole of the earbud tip with the axis and
gently push the tip toward it until the axis fully
insert the hole.
REPLACING EARBUDS

10
When you pair goHearing R1 to your Apple device,
audio from your Apple device goes to your hearing
device. Should the Bluetooth be disconnected due
to range or any other reason, reconnect the
goHearing R3 with the device that you wish to pair
with.
To pair your hearing device, follow these steps
1. Make sure that Bluetooth is ON.
Go to Settings, and select Bluetooth.
PAIR AND CONNECT

11
2. On your Apple device, go to Settings >
Accessibility > Hearing> Hearing Devices.

12
3. Your Apple device will search for your hearing
device. Under MFi Hearing Devices, tap the
device name goHearing R3.
4. Tap Pair when you see the pairing request on
the screen. If you have two hearing devices,
you'll get two requests. Pairing could take up
to a minute.

13
You can start using your goHearing R3 when you
see it under MFi Hearing Devices with a check
mark.
Pair with more than one device
When you pair your goHearing R3 with more than
one Apple device, the connection for your hear-
ing devices switches from one device to the other
when you use audio. The connection also switch-
es when you receive a call on your phone. If you
make changes to your hearing device settings on
one device, they're sent to your other devices.

14
To pair with another iPhone, iPad, or iPod touch,
follow these steps:
1. Make sure all devices are connected to the
same Wi-Fi network and signed in to iCloud
with the same Apple ID.
2. Follow the steps for how to pair your hearing
device.
Scan the QC code and follow the step by step
guide (https://support.apple.com/en-us/
HT201466)

15
You can use your Apple device to select environ-
ment presets adjust the volume, turn on Live
Listen, and more. To control your hearing device,
use Settings or the Accessibility Shortcut.
Set preferences for features that you control with
your Apple device by going to:
Settings > Accessibility > Hearing Devices
Then tap Hearing Devices
Play Ringtones
You can play ringtones through connected
hearing devices.
Audio Routing
Choose the default device for audio playback.
CONTROL YOUR HEARING DEVICE

16
Control Nearby Devices
Use your Apple device to adjust the settings of
hearing devices that are on the same WiFi net-
work and connected to your iCloud account.
Audio Hando
Continue listening to media through your hearing
device when you switch between your Apple
devices. For example, if your hearing device is
connected to your iPhone but you start watching
a movie on your iPad, the hearing device auto-
matically switches to the iPad.
Control on Lock Screen
Quickly make preset and volume adjustments on
your hearing device right from the Lock Screen
with the Accessibility Shortcut or Control Center
hearing button.

17
Tap the device name goHearing R3 in Settings
● Adjust volume levels for either or both hearing
devices.