Mimitakara goodHearing A1 User manual

User Guide
@goodHearing A1

1. ACCESSORIES
2. FEATURES
3. SET UP
3.1) Wearing Instructions
3.2) Recharging Instruction
3.3) Switching Between Modes
4. PAIRING BLUETOOTH
4.1) Download App
4.2) Bluetooth Connect
4.3) Notes
5. SAFETY & MAINTENANCE
5.1) Earbud Maintenance
5.2) Battery Maintenance
5.3) LED Statues
6. FAQ
7. SPECIFICATION
8. WARNING AND REMINDER
......................................... P1
............................................. P2
.................................................. P3
......................... P3
....................... P5
................. P7
...............................P9
...................................P9
.............................P9
............................................ P12
....................... P14
....................... P14
....................... P15
................................... P16
................................................... P18
.................................... P21
..................... P22
Content

1
1. ACCESSORIES
Main device with replaceable earbuds (M size)
3 x Additional pair of L, S & Mini size earbuds
Cleaning Brush
USB Cable

2
2. FEATURES
9
7
Cable Clips Earphones
Charging Port LED Indicator
Power Switch Dual Microphone
Magnetic Earphone Holders
Left Volume Controller
Right Volume Controller
Mode / Bluetooth Connect
6
8

3
3. SET UP
3.1) Wearing Instructions
1) Simply place the device around your neck,
under your shirt collar or on the neck and place
the earbuds into your ear.
2) The power switch is
on the left side of the
device facing your
neck.

4
3) The goodHearing A1 has adjustable volume
settings. To adjust the volume of the device, the
right and left sides / buttons situated on the
outer sides base of the device, increase and
decrease the volume respectively to suit your
preferred specication
CAUTION: LISTENING AT A HIGH VOLUMES MAY
DAMAGE YOUR HEARING
4) We suggest placing the device around your neck,
under your collar to avoid it from rubbing against
objects in order to reduce static sounds (Ensure
the microphone is not obstructed for optimum
sound quality)

5
3.2) Recharging Instruction
1) Charging the battery before use is recommended
but not required. The goodHearing A1 comes
pre-charged however initial charge will vary.
2) 3+ hours for full charge gives up to 10 hours of
usage time

6
Solid BLUE LED Indicator : Fully charged
Solid RED LED Indicator : Charging
3) When plugged into a power source

7
3.3) Switching Between Modes
1) There are 3 pre-set modes on the goodHearing
A1.
General : Standard Mode
Mostly used indoors where the environment is
not too noisy.
Conversation : Noise Cancelling Mode
Used in louder environment such as outdoor
public areas, restaurants.
In-car : High-level Noise Cancelling Mode
Providing superior noise cancelling in even
the loudest environments, such as in
transportation.

88
2) To switch between the 3 modes click the
button (located on the center of the goodHear-
ing A1 device). A beep will be heard when
switching between the 3 modes to indicate
which mode it is currently set.
Mode 1 : A single beep will be heard
(General: Standard Mode)
Mode 2 : Two beeps will be heard
(Conversation: Noise Cancelling Mode)
Mode 3 : Three beeps will be heard
(In-car: High-level Noise Cancelling
Mode)

99
4. PAIRING BLUETOOTH
4.1) Download App
Please scan QR code to download the App or
search “goodHearing” on App Store / Google Play
4.2) Bluetooth Connect
1. Turn on goodHearing A1 and have both
devices within arm length of each other.
2. Press and hold the for 3 seconds, the LED
Indicator will ash alternating BLUE and RED
colors.
3. Turn on the Bluetooth function on your mobile
device.
AndroidiOSgoodHearing

10
4. Scan for nearby devices, search and pair with
goodHearing A1.
O
Wi-Fi
Connected
Bluetooth
Connected
Bluetooh
WIRELESS & NETWORKS
Airplane Mode O
On
On
AVAILABLE DEVICES
User Name
Currently visible to nearby devices
Scan
goodHearing A1
Bluetooh
On

11
5. When pairing has been successful your phone
will show that the status is “Connected” with
goodHearing A1.
※The pairing steps may vary according to your
mobile operating system.
User Name
Currently visible to nearby devices
Scan
AVAILABLE DEVICES
goodHearing A1
Connected
Bluetooh
On

12
4.3) Notes
Paired devices will remember each other unless
pairing information is deleted manually, so
there is no need to pair again. The goodHearing
A1 can pair and remember 2 Bluetooth devices.
Repeat the steps outlined above to set-up your
goodHearing A1 with another Bluetooth device.
When a 3rd Bluetooth device is paired, the oldest
pairing device information with goodHearing
A1 will be deleted.
The goodHearing A1 will connect automatically
with the latest connected Bluetooth device.
If you want to use another Bluetooth device to
pair with goodHearing A1, switch o the Blue-
tooth function of the current Bluetooth device,
connect the new Bluetooth mobile device to the
unit by selecting goodHearing A1 on the Blue-
tooth device list and press connect.

13
When the Bluetooth device that is connected
to the goodHearing A1 is not playing any sort
of media, the device will automatically switch
back to being its primary function until the
connected device starts playing media or
receives a phone call again.
Should the Bluetooth be disconnected due to
range or any other reason, reconnect the
goodHearing A1 with the device that you wish
to pair it with.
If you have connected the goodHearing A1
to a device and the 2 devices gets out of
connecting range, the goodHearing A1 will
have a reminder tone in the background.
To switch this tone o, simple turn o the unit
for 5 seconds and turn it back on.

14
5.1) Earbud Maintenance
Clean your ear thoroughly before each use.
Remove all remaining debris from the earbud
and ensure that the hole on the side is also free
from any debris after each use.
※Use the Cleaning Brush to clean any earwax
adhered on the hearing aid, especially in
and around the hearing aid and earbud tip.
5. SAFETY & MAINTENANCE
Before
each
use
After
each
use

15
5.2) Battery Maintenance
Do not consistently discharge the battery
completely before recharging as this may
cause depletion of the batteries life.
We suggest recharging goodHearing A1
regardless of its battery status before sleeping
at night.
Do not attempt to remove the battery as this
may cause damage to the goodHearing A1
device or may cause injuries.
Ensure the device is fully charged before
removing it from charge.

16
5.3) LED Indicator status
Solid RED: Charging
Solid BLUE: Fully Charged
Flashing BLUE: ON (working normally)
Flashing RED and BLUE:
Searching for Bluetooth devices to be paired
Flashing PURPLE:
Bluetooth Connected with media playing
ON
OFF
MODE
Bluetooth
Search 2 Sec Push
Push
LED

17
Blue : Fully Charged
Red : Charging
Red : ON / OFF
LED Indicator
Red & Blue : Bluetooth Search
Blue : Bluetooth Standby
Red-Purple-Blue : Bluetooth
Connected with media playing