Mimitakara @goodHearing P1 User manual

User Guide
@goodHearing P1

1. ACCESSORIES
2. FEATURES
3. SET UP
3.1) Wearing instructions
3.2) Recharging instruction
3.3) Switching between modes
4. PAIRING BLUETOOTH
5. SAFETY & MAINTENANCE
5.1) Ear bud maintenance
5.2) Battery maintenance
5.3) LED Statues
6. ADDITIONAL INFORMATION
7. FAQ
8. SPECIFICATION
9. WARNING AND REMINDER
......................................... P1
............................................. P2
.................................................. P3
......................... P3
...................... P5
................. P7
............................. .P9
....................... P12
....................... P12
........................ P13
.................................... P14
................... P15
................................................... P16
.................................... P19
..................... P20
Content

1
1. ACCESSORIES
Main unit with built-in ear buds (M size)
2 x Additional pair of L & S Size ear buds
USB cable

2
2. FEATURES
Mode /
Bluetooth
Connect
Volume controller
LED Indicator
Microphone
Earphone
(Red – Right)
(Blue – Left)
Power Switch
Charging port Collar clip
t

3
3. SET UP
3.1) Wearing instructions
1) Securely t the red earphone into the right ear
and the blue earphone into the left ear.
2) Turn the unit ON (When the unit is turned
on the LED Indicator Light will ash blue.
3) The goodHearing P1 has 11 adjustable volume
settings, adjust the volume to suit your pre-
ferred specication. When the hearing aid is
turned o and turned back on it will resume
from its previous setting from when it was
turned o.
CAUTION : LISTENING AT A HIGH VOLUMES
MAY DAMAGE YOUR HEARING.

4
4) We suggest clipping the device to the outside
shirt pocket or collar to avoid it from rubbing
against objects in order to reduce the static
sounds (Ensure the microphone is not
obstructed for optimum sound quality).

5
3.2) Recharging Instruction
1) Charging the battery before use is recommended
but not required.
goodHearing P1 comes pre-charged however
initial charge will vary.
2) 3+ hrs for full charge gives up to 10 hours of
usage time.

6
Solid BLUE LED Indicator : Fully charged
Solid RED LED Indicator : Charging
3) When plugged into a power source

7
3.3) Switching between modes
1) There are 3 pre-set modes on the goodHearing
P1 (Standard Mode & Noise Cancelling Mode).
Standard Mode :
Mostly used indoor where the environment is
not too noisy.
Noise Cancelling Mode :
Used in louder environment such as outdoor
public areas, restaurants.
High-level Noise Cancelling Mode :
Providing superior noise cancelling in even
the loudest environments, such as in
transportation

88
2) To switch between the 2 modes click the
button (located in the center of the goodHear-
ing P1 device). A beep will be heard when
switching between the 3 modes to indicate
which mode it is currently set it.
Mode 1 : A single beep will be heard
(Standard Mode)
Mode 2 : 2 beeps will be heard
(Noise Cancelling Mode)
Mode 3 : 3 beeps will be heard
(High-level Noise Cancelling Mode)

99
4. PAIRING BLUETOOTH
1) Have both devices within arm length of each
other
2) Turn on goodHearing P1
3) Press and hold the M for 3 seconds
4) The LED Indicator will ash alternating BLUE
and RED colors
5) Turn on the Bluetooth function on your mobile
device
6) Scan for nearby devices
7) Pair with goodHearing P1
8) When pairing has been successful your phone
will show that the status is connected with
goodHearing P1
Paired devices will remember each other unless
pairing information is deleted, so there is no need
to pair again. goodHearing P1 can pair and reme-
mber 2 bluetooth devices.

10
Repeat the steps outlined above to set-up your
goodHearing P1 with another Bluetooth device.
Note that when a 3rd Bluetooth device is paired
the oldest pairing Bluetooth device information
will be deleted.
goodHearing P1 will connect with the latest
connected device.
If you want to use another paired Bluetooth
device, switch o the Bluetooth function of the
current Bluetooth device, and then connect the
Bluetooth device to the hearing device by selecting
goodHearing P1 on the Bluetooth device list and
press connect.
When the Bluetooth device that is connected to
the goodHearing P1 is not playing any sort of
media, the device will automatically switch back
to being its rimary function until the connected
device starts playing media or receives a Should
the Bluetooth be disconnected due to range or

11
any other reason, reconnect the goodHearing P1
with the device that you wish to pair it with.
Please scan QR code to download the APP or
search “goodHearing” on APP Store / Google Play
AndroidiOS
goodHearing

12
5.1) Ear bud maintenance
Before each use : Clean your ear thoroughly.
After each use : Remove all remaining debris
from the ear bud after each use. Ensure that the
hole on the side of ear bud is also free from any
debris.
5. SAFETY AND MAINTENANCE
Before
each
use
Thoroughly clean the ear
After
each
use
Use the cleaning brush to clean any earwax
adhered on the hearing aid, especially in and
around the hearing aid and ear bud nipple.

13
5.2) Battery maintenance
Do not consistently discharge the battery
completely before recharging as this may
cause depletion of the batteries life.
We suggest recharging goodHearing P1
regardless of its battery status before sleeping
at night.
Do not attempt to remove the battery as this
may cause damage to the goodHearing P1
device or may cause injuries.
Ensure the device is fully charged before
removing it from charge.

14
5.3) LED Indicator status
Solid RED : Charging
Flashing BLUE : ON (working normally)
Flashing RED and BLUE :
goodHearing P1 is searching for Bluetooth
devices to pair with.
Flashing PURPLE :
Connected to a device and outputting media
audio.

6. ADDITIONAL INFORMATION
Keep the device out of reach for children.
Do not attempt to open, x, replace or remove
any of the components.
Avoid excessive volume levels and prolonged
periods of use.
Avoid using the device while you are sleeping.
Keep the device in dry areas.
Keep the device away from high temperature
areas.
15

16
7. FAQ
Question : No Sound
Answer :
Turn on the device
Increase the volume
Clean out the earphone caps
Check if the earphone cable damages
Recharge the device
Question : Charging problems
Answer :
Check that the USB is connected correctly
Ensure that the power supply is normal
(wall outlet switch is on)
Question : Can’t power on
Answer :
Out of battery and needs to be charged.

17
Question : Is it compatible for both Android
and iOS systems?
Answer :
Yes, is compatible for both Android and iOS
systems.
Question : There is a lag when I change from
listening to media on my phone and back to
the hearing aid function is this normal?
Answers :
Yes, there is a slight lag as it depends on the
operating system you are currently running on
your phone. There may be up to 5 second
delay.
Question : Can I pick up phone calls with the
hearing aid?
Answers :
Yes, you can, with Android and iOS system your