MIND READER STRAWDISP User manual
Introduction
Thank you for purchasing the MIND READER™Straw Dispenser for Table.
These Assembly Instructions are intended to provide you with guidelines
to ensure that assembly and operation of this product is safe and does
not pose risk to the user.
Please read all directions before using the product and retain this guide
for reference. This product is intended for household use only. It is not
intended for commercial use.
Safety Precautions
© 2021. EMS Mind Reader, LLC. All Rights Reserved. 1
STRAWDISP
Straw Dispenser for Table
Assembly Guide
▪WARNING: CHOKING HAZARD- Small
parts. Not for children under 3 years.
▪Keep all small parts away from children
while you assemble the product, as
these parts could present a choking
hazard.
▪Ensure all parts are present before
beginning assembly.
▪Please make sure you have thoroughly
read and understood these
instructions, as improper assembly
could lead to personal injury or
property damage.
▪Do not attempt to modify the product
from the instillation instructions.
▪Make sure to set up the product on a
solid, stable surface.
▪Make sure that you install all parts as
described. Any variation or
modification of parts could be
detrimental to the performance of this
product.
▪Do not allow children to assemble or
play on this device, as it can lead to
injury.
▪Do not place this product outdoors or
in other damp environments, as this
could cause damage to the product.
▪Do not jump, step, or play on this
product.
▪Make sure this product is steady once
assembled.
Large
Medium
Small
1. Suitable for straws with a diameter of 0.4 cm to 1.2 cm.
2. Appropriately adjust the sliding buttons according to the diameter
of the straw to the “small/medium/large” position.
3. Straws will come out one at a time
© 2021. EMS Mind Reader, LLC. All Rights Reserved. 2
Package Contents
Ensure all parts are present before beginning assembly.
Care and Maintenance
•Stop using your Straw Dispenser for Table if it breaks or you notice a change in its appearance.
•Check the assembly every three (3) months, or at least every (6) months.
•To clean the product, use a soft, clean cloth to wipe it down.
•If needed for heavier soiling, you can use a gentle detergent or cleaning solution. We recommend
testing on a small section first to ensure it will not discolor or damage the product.
•Do not use ethyl alcohol, banana oil, or other chemical solvents to clean this product.
•Do not attempt to repair or modify this product on your own, as this could lead to further damage or
injury.
Specifications
•Straw Dispenser for Table Length: 9.45” (24.23 cm)
•Straw Dispenser for Table Width: 5.71” (14.50 cm)
•Straw Dispenser for Table Height: 7.68” (19.50 cm)
•Straw Dispenser for Table Weight: 1.34 lb.
•Number of Straws That Fit: 100-200 straws
Questions? Send us an E-mail!
MIND READER and the MIND READER logo are trademarks of EMS Mind Reader, LLC in the U.S.
All other products, brand names, company names, and logos are trademarks of their respective owners, used merely to
identify their respective products, and are not meant to connote any sponsorship, endorsement, or approval.
© 2021. EMS Mind Reader, LLC. All Rights Reserved. 3
