Graco 244651 Operation manual

309344C
EN
Instructions - Parts List
Stand Mount Bulk Grease
Transfer Packages
For dispensing non-corrosive and non-abrasive oils and lubricants only. For professional
use only.
Not approved for use in explosive atmospheres or hazardous (classified) locations.
Model No. 244651, 3:1 Bulldog® Pump
120 psi (0.8 MPa, 8.3 bar) Maximum Air Input Pressure.
360 psi ((2.5 MPa, 25 bar) Maximum Fluid Working Pressure.
Model No. 244656, Viscount® II Pump
1500 psi (10 MPa, 103 bar) Maximum Hydraulic Input Pressure.
2300 psi (15.9 MPa, 159 bar) Maximum Fluid Working Pressure.
Related Manuals
Important Safety Instructions
For complete warnings refer to the Operating
and/or Repair manual for Bulldog Air Motor,
3:1 Ratio Bulldog Transfer Pump, or Viscount II
Hydraulic Motor.
Manual in
English Description
307049 Bulldog Air Motor
306642 3:1 Ratio Bulldog Transfer Pump
307158 Viscount II Hydraulic Motor

Parts
2 309344C
Parts
Part Number/Assembly Name
Not included in packages. Call
your Graco distributor or installer
to purchase separately.
1
Ref. Part Description Qty.
1 205148 PUMP, 3:1 Bulldog (Model 244651) See
Related Manuals, page 1.
1
222902 PUMP, Viscount II (Model 244656) See
Related Manuals, page 1.
1
2 223952 STAND, floor See Related Manuals,
page 1.
1
3 244845 REGULATOR, air, 3/4 npt(fbe) (Includes
gauge) See Related Manuals, page 1.
1
4 208610 HOSE, air, 3/4 in. ID, 3/4 npt(mbe) x 6 ft. 1
5 247969 HOSE, fluid, 2 in. ID, 2 npt(mbe) x 6 ft.
(Model 244651)
1
115042 HOSE, fluid, 1 in. ID, 1 npt(mbe) x 6 ft,
(Model 244656)
1
6 110226 VALVE, air shutoff, 3/4 npt(fbe) 1
7 512213 VALVE, fluid shutoff, 2 npt(fbe) (Model
244651)
1
116471 VALVE, fluid shutoff, 1 npt(fbe) (Model
244656)
1
8 222776 KIT, mounting (Model 244656) See form
405952
1
224148 KIT, mounting (Model 244651) 1
9 116650 COUPLING, 1-1/2 npt(f) x 1 npt(f)
(Model 244656)
1
10 116648 ADAPTER, swivel, straight, 1 npt(m) x 1
npsm(f), (Model 244656)
1
116470 ADAPTER, swivel, straight, 2 npt(m) x 2
npsm(f) (Model 244651)
1
11 175013 NIPPLE, 3/4 npt(mbe) 1
12 208390 VALVE, ball, 1/4 npt(mbe) (Models
244651 and 244656)
1
13 236865 MANIFOLD, hydraulic fluid control
(Model 244656)
1
14 116745 ADAPTER, swivel, straight, 1 npt(m) x
1-1/4 npsm(f) (Model 244656)
1
Ref. Part Description Qty.

Recycling and Disposal
309344C 3
Recycling and Disposal
End of Product Life
At the end of the product’s useful life, dismantle and
recycle it in a responsible manner.
• Perform the Pressure Relief Procedure in your
pump manual.
• Drain and dispose of fluids according to applicable
regulations. Refer to the material manufacturer’s
Safety Data Sheet.
• Deliver remaining product to a recycling facility.
Technical Specifications
The system maximum air and fluid pressure ratings are on the cover. See the separate Technical Data/Technical
Specifications section in the pump and motor instructions manuals that came with your pump/motor.
California Proposition 65
Wetted parts
Pump See separate pump instruction manuals
Output fitting, hose, valve Steel, brass, rubber
CALIFORNIA RESIDENTS
WARNING: Cancer and reproductive harm – www.P65warnings.ca.gov.

All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 309344
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2001, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
www.graco.com
Revision C, June 2022
Graco Standard Warranty
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty
published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by
Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written
recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or
maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification
of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be
returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or
workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental
or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these
warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder,
or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the
negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered
into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu
que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés,
à la suite de ou en rapport, directement ou indirectement, avec les procédures concernées.
Graco Information
For the latest information about Graco products, visit www.graco.com.
For patent information, see www.graco.com/patents.
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: [phone] or Toll Free: 1-800-533-9655, Fax: [phone]