Mindray iMEC8 Vet User manual

iMEC8 Vet
Portable Multi-Parameter Veterinary
Monitor
Operator’s Manual

I
©Copyright 2015-2019Shenzhen Mindray Bio-Medical Electronics Co., Ltd. All rights reserved.
Release date:2019-01
Revision: 3.0
Intellectual Property Statement
SHENZHEN MINDRAY BIO-MEDICAL ELECTRONICS CO., LTD. (hereinafter called Mindray) owns the intellectual property
rights to this Mindray product and this manual. This manual may refer to information protected by copyrights or patents
and does not convey any license under the patent rights of Mindray, nor the rights of others.
Mindray intends to maintain the contents of this manual as confidential information. Disclosure of the information in
this manual in any manner whatsoever without the written permission of Mindray is strictly forbidden.
Release, amendment, reproduction, distribution, rental, adaption and translation of this manual in any manner
whatsoever without the written permission of Mindray is strictly forbidden.
, , and are the registered trademarks or trademarks owned by Mindray in China
and other countries. All other trademarks that appear in this manual areused only for editorial purposes without
the intention ofimproperly using them. They are the property oftheir respective owners.
This posting serves as notice under 35 U.S.C.§287(a) for Mindray patents: http://www.mindrayna.com/patents.

II
Manufacturer's Responsibility
Contents of this manual are subject to changes without prior notice.
All information contained in this manual is believed to be correct. Mindray shall not be liable for errors contained herein
nor for incidental or consequential damages in connection with the furnishing, performance, or use of this manual.
Mindray is responsible for the effects on safety, reliability and performance of this product, only if:
all installation operations, expansions, changes, modifications and repairs of this product are conducted by Mindray
authorized personnel;
the electrical installation of the relevant room complies with the applicable national and local requirements;
the product is used in accordance with the instructions for use.
WARNING
This equipment must be operated by skilled/trained clinical professionals.
It is important for the hospital or organization that employs this equipment to carry out a reasonable
service/maintenance plan. Neglect of this may result in machine breakdown or personal injury.
Service
Mindray maintains a network of service representatives and factory-trained distributors. Prior to requesting service,
perform a complete operational check of the instrument to verify proper control settings. If operational problems
continue to exist, contact the Service Department at [phone], ext: 8116 for Technical Support or [phone]
for assistance in determining the nearest field service location.
Please include the instrument model number, the serial number, and a description of the problem with all requests for
service.
Any questions regarding the warranty should be directed to your local sales or service representative.
NOTE
Upon request, Mindray provides circuit diagrams, component part lists, descriptions, calibration
instructions, or other information which assist the user’s appropriately qualified technical personnel to
repair those parts of the equipment which are designated by Mindray DS USA, Inc. as repairable.

Company Contact
Manufacturer: Shenzhen Mindray Bio-Medical Electronics Co., Ltd.
Address: Mindray Building, Keji 12th Road South, Hi-tech industrial park,
Nanshan,Shenzhen 518057,P.R.China
Website: www.mindray.com
E-mail Address: [e-mail]
Tel: [phone]
Fax: [phone]
Distributor: Mindray DS USA, Inc.
Address: 800 MacArthur Boulevard, Mahwah, New Jersey, 07430 USA
Tel: [phone]
Website: www.mindray.com
III

Preface
Manual Purpose
This manual contains the instructions necessary to operate the product safely and in accordance with its function and
intended use. Observance of this manual is a prerequisite for proper product performance and correct operation and
ensures patient and operator safety.
This manual is based on the maximum configuration and therefore some contents may not apply to your product. If you
have any question, please contact Mindray.
This manual is an integral part of the product. It should always be kept close to the equipment so that it can be obtained
conveniently when needed.
Intended Audience
This manual is geared for clinical professionals who are expected to have a working knowledge of medical procedures,
practices and terminology as required for monitoring of critically ill patients.
Illustrations
All illustrations in this manual serve as examples only. They may not necessarily reflect the setup or data displayed on
your monitor.
Conventions
Italic text is used in this manual to quote the referenced chapters or sections.
[ ] is used to enclose screen texts.
→is used to indicate operational procedures.
IV

I
Contents
1 Safety..............................................................................................................................................................................1-1
1.1 Safety Information.................................................................................................................................................................................... 1-1
1.1.1 Dangers.......................................................................................................................................................................................... 1-2
1.1.2 Warnings........................................................................................................................................................................................ 1-2
1.1.3 Cautions ......................................................................................................................................................................................... 1-3
1.1.4 Notes............................................................................................................................................................................................... 1-3
1.2 Equipment Symbols................................................................................................................................................................................. 1-3
2 The Basics .......................................................................................................................................................................2-1
2.1 Monitor Description................................................................................................................................................................................. 2-1
2.1.1 Intended Use ................................................................................................................................................................................ 2-1
2.2 Front View ................................................................................................................................................................................................... 2-1
2.3 Side View ..................................................................................................................................................................................................... 2-3
2.4 Rear View..................................................................................................................................................................................................... 2-4
2.5 Display Screen ........................................................................................................................................................................................... 2-5
2.6 QuickKeys.................................................................................................................................................................................................... 2-7
3 Basic Operations ............................................................................................................................................................3-1
3.1 Installation .................................................................................................................................................................................................. 3-1
3.1.1 Unpacking and Checking ......................................................................................................................................................... 3-1
3.1.2 Environmental Requirements ................................................................................................................................................. 3-2
3.2 Getting Started.......................................................................................................................................................................................... 3-2
3.2.1 Turning Power On ....................................................................................................................................................................... 3-2
3.2.2 Starting Monitoring.................................................................................................................................................................... 3-3
3.3 Turning the Monitor Off.......................................................................................................................................................................... 3-3
3.4 Using Keys................................................................................................................................................................................................... 3-3
3.5 Using the Touchscreen............................................................................................................................................................................ 3-3
3.6 Setting the Screen.................................................................................................................................................................................... 3-4
3.7 Using the On-screen Keyboard ............................................................................................................................................................ 3-5
3.8 Using the Timer ......................................................................................................................................................................................... 3-5
3.9 Using the Main Menu.............................................................................................................................................................................. 3-6
3.10 Changing General Settings ................................................................................................................................................................. 3-6
3.10.1 Setting up a Monitor................................................................................................................................................................ 3-6
3.10.2 Changing Language ................................................................................................................................................................ 3-7
3.10.3 Adjusting the Screen Brightness.......................................................................................................................................... 3-7
3.10.4 Showing/Hiding Online Help Information........................................................................................................................ 3-7
3.10.5 Setting the Date and Time..................................................................................................................................................... 3-7
3.10.6 Adjusting Volume ..................................................................................................................................................................... 3-7
3.11 Setting Parameters ................................................................................................................................................................................ 3-8
3.11.1 Switching the Parameters On/Off........................................................................................................................................ 3-8
3.11.2 Accessing the Parameters Menu.......................................................................................................................................... 3-8
3.12 Operating Modes ................................................................................................................................................................................... 3-9

II
3.12.1 Monitoring Mode ...................................................................................................................................................................... 3-9
3.12.2 Night Mode ................................................................................................................................................................................. 3-9
3.12.3 Privacy Mode .............................................................................................................................................................................. 3-9
3.12.4 Demo Mode ............................................................................................................................................................................. 3-10
3.12.5 Standby Mode......................................................................................................................................................................... 3-10
4 Managing Patients.........................................................................................................................................................4-1
4.1 Admitting a Patient .................................................................................................................................................................................. 4-1
4.2 Quick Admitting a Patient......................................................................................................................................................................4-2
4.3 Querying and Obtaining Patient Information..................................................................................................................................4-2
4.4 Associating Patient Information........................................................................................................................................................... 4-3
4.5 Editing Patient Information....................................................................................................................................................................4-3
4.6 Discharging a Patient............................................................................................................................................................................... 4-3
4.7 Transferring a Patient............................................................................................................................................................................... 4-4
4.7.1 Transferring Data from the Monitor to a USB Drive .......................................................................................................... 4-4
4.7.2 Transferring Data from a USB Drive to the Monitor .......................................................................................................... 4-5
4.8 Connecting to a Central Monitoring System.................................................................................................................................... 4-6
5 Managing Configurations .............................................................................................................................................5-1
5.1 Introduction................................................................................................................................................................................................ 5-1
5.2 Entering the [Manage Configuration] Menu .................................................................................................................................... 5-1
5.3 Setting Default Configuration...............................................................................................................................................................5-2
5.4 Saving Current Settings .......................................................................................................................................................................... 5-2
5.5 Editing a Configuration........................................................................................................................................................................... 5-2
5.6 Deleting a Configuration........................................................................................................................................................................5-3
5.7 Transferring a Configuration.................................................................................................................................................................. 5-3
5.8 Loading a Configuration......................................................................................................................................................................... 5-3
5.9 Restoring the Latest Configuration Automatically .........................................................................................................................5-4
5.10 Modifying Password .............................................................................................................................................................................. 5-4
6 User Screens...................................................................................................................................................................6-1
6.1 Tailoring Your Screens.............................................................................................................................................................................. 6-1
6.1.1 Changing the Wave Line Size................................................................................................................................................... 6-1
6.1.2 Changing Measurement Colors .............................................................................................................................................. 6-1
6.1.3 Changing Screen Layout ...........................................................................................................................................................6-1
6.2 Viewing Minitrends................................................................................................................................................................................... 6-1
6.2.1 Having a Split-Screen View of Minitrends............................................................................................................................6-1
6.2.2 Setting Minitrends.......................................................................................................................................................................6-2
6.3 Viewing OxyCRG........................................................................................................................................................................................ 6-2
6.4 Viewing Other Patients............................................................................................................................................................................ 6-3
6.4.1 Care Group..................................................................................................................................................................................... 6-3
6.4.2 Viewing the Care Group Overview Bar..................................................................................................................................6-4
6.4.3 Understanding the [View Other Patient] Window ............................................................................................................6-4
6.5 Understanding the Big Numerics Screen ..........................................................................................................................................6-5
7 Alarms ............................................................................................................................................................................7-1

III
7.1 Alarm Categories ...................................................................................................................................................................................... 7-1
7.2 Alarm Levels ............................................................................................................................................................................................... 7-2
7.3 Alarm Indicators........................................................................................................................................................................................ 7-2
7.3.1 Alarm Lamp................................................................................................................................................................................... 7-2
7.3.2 Alarm Message............................................................................................................................................................................. 7-2
7.3.3 Flashing Numeric ........................................................................................................................................................................ 7-3
7.3.4 Audible Alarm Tones .................................................................................................................................................................. 7-3
7.3.5 Alarm Status Symbols................................................................................................................................................................ 7-3
7.4 Alarm Tone Configuration...................................................................................................................................................................... 7-4
7.4.1 Setting the Minimum Alarm Volume .................................................................................................................................... 7-4
7.4.2 Changing the Alarm Volume ................................................................................................................................................... 7-4
7.4.3 Setting the Interval between Alarm Sounds ...................................................................................................................... 7-4
7.4.4 Changing the Alarm Tone Pattern.......................................................................................................................................... 7-5
7.4.5 Setting the Reminder Tones..................................................................................................................................................... 7-5
7.5 Understanding the Alarm Setup Menu.............................................................................................................................................. 7-5
7.5.1 Setting Alarm Properties for All Parameters....................................................................................................................... 7-6
7.5.2 Adjusting Alarm Limits Automatically.................................................................................................................................. 7-6
7.5.3 Setting Alarm Delay Time......................................................................................................................................................... 7-8
7.5.4 Setting SpO2Technical Alarm Delay...................................................................................................................................... 7-8
7.5.5 Setting Recording Length ........................................................................................................................................................ 7-8
7.5.6 Intubation Mode ......................................................................................................................................................................... 7-8
7.6 Pausing Alarms.......................................................................................................................................................................................... 7-9
7.7 Switching Off All Alarms......................................................................................................................................................................... 7-9
7.8 Silencing the Alarm Sound.................................................................................................................................................................. 7-10
7.9 Latching Alarms ...................................................................................................................................................................................... 7-10
7.10 Silencing Technical Alarms................................................................................................................................................................ 7-10
7.11 Testing Alarms....................................................................................................................................................................................... 7-11
7.12 When an Alarm Occurs ....................................................................................................................................................................... 7-11
7.13 Using Care Group Alarms................................................................................................................................................................... 7-11
7.13.1 Care Group Auto Alarms....................................................................................................................................................... 7-11
7.13.2 Setting Care Group Alert Tone............................................................................................................................................ 7-12
7.13.3 Silencing Care Group Alarms .............................................................................................................................................. 7-12
8 Monitoring ECG..............................................................................................................................................................8-1
8.1 Introduction ............................................................................................................................................................................................... 8-1
8.2 Safety............................................................................................................................................................................................................ 8-1
8.3 Preparing to Monitor ECG...................................................................................................................................................................... 8-1
8.3.1 Preparing the Patient and Placing the Electrodes ............................................................................................................ 8-1
8.3.2 Choosing AHA or IEC Lead Placement.................................................................................................................................. 8-2
8.3.3 ECG Lead Placements ................................................................................................................................................................ 8-2
8.3.4 Checking Paced Status .............................................................................................................................................................. 8-4
8.4 Understanding the ECG Display........................................................................................................................................................... 8-5
8.5 Changing ECG Settings........................................................................................................................................................................... 8-5
8.5.1 Accessing ECG Menus................................................................................................................................................................ 8-5
8.5.2 Choosing the Alarm Source..................................................................................................................................................... 8-5
8.5.3 Setting the ECG Lead Set .......................................................................................................................................................... 8-6

IV
8.5.4 Choosing an ECG Display Screen............................................................................................................................................8-6
8.5.5 Changing the ECG Filter Settings ...........................................................................................................................................8-6
8.5.6 Setting the Notch Filter..............................................................................................................................................................8-7
8.5.7 Changing the Pacer Reject Settings.......................................................................................................................................8-7
8.5.8 Changing ECG Wave Settings ..................................................................................................................................................8-7
8.5.9 Enabling Smart Lead Off ...........................................................................................................................................................8-8
8.5.10 Setting the Alarm Level for ECG Lead Off Alarms............................................................................................................8-8
8.5.11 Adjusting QRS Volume............................................................................................................................................................. 8-8
8.5.12 About the Defibrillator Synchronization............................................................................................................................8-8
8.6 About ST Monitoring ............................................................................................................................................................................... 8-8
8.6.1 Switching ST On and Off ...........................................................................................................................................................8-9
8.6.2 Changing ST Filter Settings ......................................................................................................................................................8-9
8.6.3 Understanding the ST Display.................................................................................................................................................8-9
8.6.4 Saving the Current ST Segment as Reference.................................................................................................................. 8-10
8.6.5 Changing the Reference Segment...................................................................................................................................... 8-10
8.6.6 Deleting a Reference Segment............................................................................................................................................. 8-10
8.6.7 Recording the ST Segment.................................................................................................................................................... 8-10
8.6.8 Changing the ST Alarm Limits.............................................................................................................................................. 8-10
8.6.9 Setting the ST Alarm Delay Time ......................................................................................................................................... 8-10
8.6.10 Adjusting ST Measurement Points.................................................................................................................................... 8-11
8.7 About Arrhythmia Monitoring........................................................................................................................................................... 8-12
8.7.1 Understanding the Arrhythmia Events.............................................................................................................................. 8-12
8.7.2 Changing Arrhythmia Alarm Settings................................................................................................................................ 8-13
8.7.3 Changing Arrhythmia Threshold Settings ........................................................................................................................ 8-13
8.7.4 Setting the Extended Arrhythmia ....................................................................................................................................... 8-13
8.7.5 Reviewing Arrhythmia Events .............................................................................................................................................. 8-14
8.8 ECG Relearning ....................................................................................................................................................................................... 8-14
8.8.1 Initiating an ECG Relearning Manually .............................................................................................................................. 8-14
8.8.2 Automatic ECG Relearning .................................................................................................................................................... 8-14
9 Monitoring Respiration (Resp) ......................................................................................................................................9-1
9.1 Introduction................................................................................................................................................................................................ 9-1
9.2 Safety Information.................................................................................................................................................................................... 9-1
9.3 Understanding the Resp Display..........................................................................................................................................................9-1
9.4 Placing Resp Electrodes ..........................................................................................................................................................................9-2
9.4.1 Optimizing Lead Placement for Resp....................................................................................................................................9-2
9.4.2 Cardiac Overlay ............................................................................................................................................................................ 9-2
9.4.3 Abdominal Breathing................................................................................................................................................................. 9-2
9.4.4 Lateral Chest Expansion ............................................................................................................................................................ 9-3
9.5 Choosing the Respiration Lead............................................................................................................................................................. 9-3
9.6 Changing the Apnea Alarm Delay .......................................................................................................................................................9-3
9.7 Changing Resp Detection Mode ..........................................................................................................................................................9-3
9.8 Changing Resp Wave Settings ..............................................................................................................................................................9-4
9.9 Setting RR Source...................................................................................................................................................................................... 9-4
9.10 Setting alarm properties ......................................................................................................................................................................9-4
9.11 Switching Resp Measurement On/Off..............................................................................................................................................9-4

V
10 Monitoring PR........................................................................................................................................................... 10-1
10.1 Introduction........................................................................................................................................................................................... 10-1
10.2 Setting the PR Source ......................................................................................................................................................................... 10-1
10.3 Selecting the Active Alarm Source.................................................................................................................................................. 10-2
10.4 QRS Tone ................................................................................................................................................................................................. 10-2
11 Monitoring SpO2....................................................................................................................................................... 11-1
11.1 Introduction........................................................................................................................................................................................... 11-1
11.2 Safety ....................................................................................................................................................................................................... 11-2
11.3 Identifying SpO2Modules.................................................................................................................................................................. 11-2
11.4 Applying the Sensor............................................................................................................................................................................ 11-3
11.5 Changing SpO2Settings..................................................................................................................................................................... 11-3
11.5.1 Accessing SpO2Menus.......................................................................................................................................................... 11-3
11.5.2 Adjusting the Desat Alarm................................................................................................................................................... 11-3
11.5.3 Setting SpO2Sensitivity........................................................................................................................................................ 11-4
11.5.4 Changing Averaging Time ................................................................................................................................................... 11-4
11.5.5 Monitoring SpO2and NIBP Simultaneously ................................................................................................................... 11-4
11.5.6 Sat-Seconds Alarm Management...................................................................................................................................... 11-4
11.5.7 Changing the Speed of the Pleth Wave........................................................................................................................... 11-5
11.5.8 Setting the Alarm Level for SpO2Sensor Off Alarm ..................................................................................................... 11-5
11.5.9 Setting the SpO2Tone Mode............................................................................................................................................... 11-6
11.6 Measurement Limitations.................................................................................................................................................................. 11-6
11.7 Masimo Information............................................................................................................................................................................ 11-6
11.8 Nellcor Information ............................................................................................................................................................................. 11-7
12 Monitoring NIBP ....................................................................................................................................................... 12-1
12.1 Introduction........................................................................................................................................................................................... 12-1
12.2 Safety ....................................................................................................................................................................................................... 12-2
12.3 Measurement Limitations.................................................................................................................................................................. 12-2
12.4 Measurement Methods...................................................................................................................................................................... 12-2
12.5 Setting Up the NIBP Measurement................................................................................................................................................. 12-3
12.5.1 Preparing to Measure NIBP.................................................................................................................................................. 12-3
12.5.2 Starting and Stopping Measurements............................................................................................................................. 12-4
12.5.3 Correcting the Measurement if Limb is not at Heart Level........................................................................................12-4
12.5.4 Enabling NIBP Auto Cycling and Setting the Interval..................................................................................................12-4
12.5.5 Starting a STAT Measurement............................................................................................................................................. 12-5
12.6 Understanding the NIBP Numerics................................................................................................................................................. 12-5
12.7 Changing NIBP Settings ..................................................................................................................................................................... 12-6
12.7.1 Setting the Initial Cuff Inflation Pressure.........................................................................................................................12-6
12.7.2 Setting NIBP Alarm Properties............................................................................................................................................ 12-6
12.7.3 Displaying NIBP List ............................................................................................................................................................... 12-6
12.7.4 Setting the Pressure Unit...................................................................................................................................................... 12-6
12.7.5 Switching On NIBP End Tone............................................................................................................................................... 12-6
12.8 Assisting Venous Puncture................................................................................................................................................................ 12-6
13 Monitoring Temp ...................................................................................................................................................... 13-1

VI
13.1 Introduction .......................................................................................................................................................................................... 13-1
13.2 Safety....................................................................................................................................................................................................... 13-1
13.3 Making a Temp Measurement ......................................................................................................................................................... 13-1
13.4 Understanding the Temp Display................................................................................................................................................... 13-2
13.5 Setting the Temperature Unit .......................................................................................................................................................... 13-2
14 Monitoring IBP...........................................................................................................................................................14-1
14.1 Introduction .......................................................................................................................................................................................... 14-1
14.2 Safety....................................................................................................................................................................................................... 14-1
14.3 Zeroing the Transducer...................................................................................................................................................................... 14-1
14.4 Setting Up the Pressure Measurement......................................................................................................................................... 14-2
14.5 Understanding the IBP Display........................................................................................................................................................ 14-3
14.6 Changing IBP Settings........................................................................................................................................................................ 14-4
14.6.1 Changing a Pressure for Monitoring ................................................................................................................................ 14-4
14.6.2 Setting the Pressure Label Order....................................................................................................................................... 14-4
14.6.3 Setting Alarm Properties...................................................................................................................................................... 14-4
14.6.4 Changing Averaging Time................................................................................................................................................... 14-4
14.6.5 Setting Up the IBP Wave ...................................................................................................................................................... 14-5
14.6.6 Enabling PPV Measurement and Setting PPV Source................................................................................................. 14-5
14.6.7 Setting the Pressure Unit..................................................................................................................................................... 14-5
14.7 Overlapping IBP Waveforms............................................................................................................................................................. 14-6
14.8 Measuring PAWP.................................................................................................................................................................................. 14-7
14.8.1 Preparing to Measure PAWP ............................................................................................................................................... 14-7
14.8.2 Setting Up the PAWP Measurement................................................................................................................................. 14-7
14.8.3 Understanding the PAWP Setup Menu ........................................................................................................................... 14-8
15 Monitoring Carbon Dioxide (CO2) .............................................................................................................................15-1
15.1 Introduction .......................................................................................................................................................................................... 15-1
15.2 Measuring CO2...................................................................................................................................................................................... 15-2
15.2.1 Making a Sidestream CO2Measurement ........................................................................................................................ 15-2
15.2.2 Making a Microstream CO2Measurement...................................................................................................................... 15-3
15.3 Changing CO2Settings....................................................................................................................................................................... 15-3
15.3.1 Accessing CO2Menus............................................................................................................................................................ 15-3
15.3.2 Entering the Standby Mode................................................................................................................................................ 15-3
15.3.3 Setting the CO2Unit.............................................................................................................................................................. 15-4
15.3.4 Setting up Gas Compensations......................................................................................................................................... 15-4
15.3.5 Setting up Humidity Compensation................................................................................................................................ 15-4
15.3.6 Setting the Apnea Alarm Delay ......................................................................................................................................... 15-5
15.3.7 Choosing a Time Interval for Peak-Picking..................................................................................................................... 15-5
15.3.8 Setting the Flow Rate............................................................................................................................................................ 15-5
15.3.9 Setting up the CO2Wave...................................................................................................................................................... 15-5
15.4 Setting RR Source ................................................................................................................................................................................ 15-6
15.5 Setting Barometric Pressure Compensation ............................................................................................................................... 15-6
15.6 Measurement Limitations................................................................................................................................................................. 15-6
15.7 Leakage Test.......................................................................................................................................................................................... 15-6
15.8 Troubleshooting the Sidestream CO2Sampling System ......................................................................................................... 15-7

VII
15.9 Removing Exhaust Gases from the System.................................................................................................................................. 15-7
15.10 Zeroing the Sensor ............................................................................................................................................................................ 15-7
15.10.1 For Sidestream and Microstream CO2Modules .......................................................................................................... 15-7
15.11 Calibrating the Sensor...................................................................................................................................................................... 15-7
15.12 Oridion Information.......................................................................................................................................................................... 15-8
16 Freezing Waveforms ................................................................................................................................................. 16-1
16.1 Freezing Waveforms ............................................................................................................................................................................ 16-1
16.2 Viewing Frozen Waveforms ............................................................................................................................................................... 16-1
16.3 Unfreezing Waveforms ....................................................................................................................................................................... 16-1
16.4 Recording Frozen Waveforms........................................................................................................................................................... 16-2
17 Review ....................................................................................................................................................................... 17-1
17.1 Accessing Respective Review Windows........................................................................................................................................ 17-1
17.2 Reviewing Graphic Trends................................................................................................................................................................. 17-1
17.3 Reviewing Tabular Trends.................................................................................................................................................................. 17-2
17.4 Events....................................................................................................................................................................................................... 17-2
17.4.1 Marking Events........................................................................................................................................................................ 17-2
17.4.2 Reviewing Events.................................................................................................................................................................... 17-3
17.5 Reviewing Waveforms......................................................................................................................................................................... 17-4
18 Calculations............................................................................................................................................................... 18-1
18.1 Introduction........................................................................................................................................................................................... 18-1
18.2 Dose Calculations................................................................................................................................................................................. 18-1
18.2.1 Performing Calculations....................................................................................................................................................... 18-1
18.2.2 Selecting the Proper Drug Unit.......................................................................................................................................... 18-2
18.2.3 Titration Table .......................................................................................................................................................................... 18-2
18.2.4 Drug Calculation Formulas .................................................................................................................................................. 18-3
18.3 Oxygenation Calculations ................................................................................................................................................................. 18-3
18.3.1 Performing Calculations....................................................................................................................................................... 18-3
18.3.2 Entered Parameters................................................................................................................................................................ 18-3
18.3.3 Calculated Parameters and Formulas............................................................................................................................... 18-4
18.4 Ventilation Calculations...................................................................................................................................................................... 18-4
18.4.1 Performing Calculations....................................................................................................................................................... 18-4
18.4.2 Entered Parameters................................................................................................................................................................ 18-5
18.4.3 Calculated Parameters and Formulas............................................................................................................................... 18-5
18.5 Hemodynamic Calculations.............................................................................................................................................................. 18-5
18.5.1 Performing Calculations....................................................................................................................................................... 18-5
18.5.2 Entered Parameters................................................................................................................................................................ 18-6
18.5.3 Calculated Parameters and Formulas............................................................................................................................... 18-6
18.6 Renal Calculations................................................................................................................................................................................ 18-7
18.6.1 Performing Calculations....................................................................................................................................................... 18-7
18.6.2 Entered Parameters................................................................................................................................................................ 18-7
18.6.3 Calculated Parameters and Formulas............................................................................................................................... 18-8
18.7 Understanding the Review Window .............................................................................................................................................. 18-8

VIII
19 Recording...................................................................................................................................................................19-1
19.1 Using a Recorder.................................................................................................................................................................................. 19-1
19.2 Overview of Recording Types .......................................................................................................................................................... 19-1
19.3 Starting and Stopping Recordings................................................................................................................................................. 19-2
19.4 Setting up the Recorder..................................................................................................................................................................... 19-2
19.4.1 Accessing the Record Setup Menu................................................................................................................................... 19-2
19.4.2 Selecting Waveforms for Recording................................................................................................................................. 19-2
19.4.3 Setting the Realtime Recording Length.......................................................................................................................... 19-2
19.4.4 Setting the Interval between Timed Recordings.......................................................................................................... 19-3
19.4.5 Changing the Recording Speed ........................................................................................................................................ 19-3
19.4.6 Clearing Recording Tasks..................................................................................................................................................... 19-3
19.5 Loading Paper....................................................................................................................................................................................... 19-3
19.6 Removing Paper Jam.......................................................................................................................................................................... 19-4
19.7 Cleaning the Recorder Printhead ................................................................................................................................................... 19-4
20 Other Functions .........................................................................................................................................................20-1
20.1 Analog Output...................................................................................................................................................................................... 20-1
20.2 Exporting the Log................................................................................................................................................................................ 20-1
20.3 Transferring Data.................................................................................................................................................................................. 20-1
20.3.1 Data Export System ............................................................................................................................................................... 20-1
20.3.2 Transferring Data by Different Means.............................................................................................................................. 20-2
20.4 Nurse Call ............................................................................................................................................................................................... 20-2
20.5 Network Connection .......................................................................................................................................................................... 20-3
20.5.1 Setting the Network Type.................................................................................................................................................... 20-3
20.5.2 Wireless Network.................................................................................................................................................................... 20-3
20.5.3 Setting the IP Address, Subnet Mask and Gateway..................................................................................................... 20-4
21 Batteries .....................................................................................................................................................................21-1
21.1 Overview ................................................................................................................................................................................................ 21-1
21.2 Replacing a Battery ............................................................................................................................................................................. 21-1
21.3 Battery Guidelines............................................................................................................................................................................... 21-2
21.4 Battery Maintenance .......................................................................................................................................................................... 21-2
21.5 Battery Recycling................................................................................................................................................................................. 21-3
22 Care and Cleaning......................................................................................................................................................22-1
22.1 General Points....................................................................................................................................................................................... 22-1
22.2 Cleaning.................................................................................................................................................................................................. 22-1
22.3 Disinfecting ........................................................................................................................................................................................... 22-2
23 Maintenance ..............................................................................................................................................................23-1
23.1 Regular Inspection .............................................................................................................................................................................. 23-1
23.2 Maintenance and Testing Schedule............................................................................................................................................... 23-2
23.3 Checking Monitor and Module Information............................................................................................................................... 23-3
23.4 ECG Verification.................................................................................................................................................................................... 23-3
23.5 NIBP Leakage Test................................................................................................................................................................................ 23-3
23.6 NIBP Accuracy Test .............................................................................................................................................................................. 23-3

IX
23.7 CO2 Test .................................................................................................................................................................................................... 23-3
23.8 Calibrating the Touchscreen............................................................................................................................................................. 23-4
23.9 Electrical Safety Tests .......................................................................................................................................................................... 23-4
24 Accessories................................................................................................................................................................ 24-1
24.1 ECG Accessories.................................................................................................................................................................................... 24-1
24.2 SpO2Accessories .................................................................................................................................................................................. 24-2
24.3 NIBP Accessories................................................................................................................................................................................... 24-3
24.4 Temp Accessories ................................................................................................................................................................................. 24-3
24.5 IBP/ICP Accessories.............................................................................................................................................................................. 24-4
24.6 CO2Accessories..................................................................................................................................................................................... 24-5
24.7 Others ...................................................................................................................................................................................................... 24-6
A Product Specifications ................................................................................................................................................. A-1
A.1 Monitor Safety Specifications............................................................................................................................................................... A-1
A.2 Power Supply Specifications................................................................................................................................................................. A-2
A.3 Physical Specifications............................................................................................................................................................................ A-2
A.4 Hardware Specifications ........................................................................................................................................................................A-3
A.5 Data Storage .............................................................................................................................................................................................. A-4
A.6 Wireless Network...................................................................................................................................................................................... A-5
A.7 Measurement Specifications ................................................................................................................................................................A-5
B EMC and Radio Regulatory Compliance ...................................................................................................................... B-1
B.1 EMC ............................................................................................................................................................................................................... B-1
B.2 Radio Regulatory Compliance.............................................................................................................................................................. B-4
C Default Configurations................................................................................................................................................. C-1
C.1 Parameters Configuration...................................................................................................................................................................... C-1
C.2 Routine Configuration ............................................................................................................................................................................ C-7
C.3 User Maintenance Items......................................................................................................................................................................... C-9
D Alarm Messages............................................................................................................................................................D-1
D.1 Physiological Alarm Messages ............................................................................................................................................................ D-1
D.2 Technical Alarm Messages.................................................................................................................................................................... D-2
E Electrical Safety Inspection ...........................................................................................................................................E-1
E.1 Power Cord Plug........................................................................................................................................................................................ E-1
E.2 Device Enclosure and Accessories....................................................................................................................................................... E-1
E.3 Device Labelling........................................................................................................................................................................................ E-2
E.4 Protective Earth Resistance ................................................................................................................................................................... E-2
E.5 Earth Leakage Test.................................................................................................................................................................................... E-2
E.6 Patient Leakage Current ......................................................................................................................................................................... E-3
E.7 Mains on Applied Part Leakage............................................................................................................................................................ E-3
E.8 Patient Auxiliary Current......................................................................................................................................................................... E-4
F Symbols and Abbreviations ..........................................................................................................................................F-1

X
F.1 Symbols ........................................................................................................................................................................................................ F-1
F.2 Abbreviations.............................................................................................................................................................................................. F-2

1-1
1Safety
1.1 Safety Information
DANGER
Indicates an imminent hazard that, if not avoided, will result in death or serious injury.
WARNING
Indicates a potential hazard or unsafe practice that, if not avoided, could result in death or serious injury.
CAUTION
Indicates a potential hazard or unsafe practice that, if not avoided, could result in minor personal injury or
product/property damage.
NOTE
Provides application tips or other useful information to ensure that you get the most from your product.

1-2
1.1.1 Dangers
There are no dangers that refer to the product in general. Specific “Danger” statements may be given in the respective
sections of this manual.
1.1.2 Warnings
WARNING
The device is intended for animal monitoring by trained personnel in the specified places.
This equipment is used for one patient at a time.
Before putting the system into operation, the operator must verify that the equipment, connecting cables
and accessories are in correct working order and operating condition.
The equipment must be connected to a properly installed power outlet with protective earth contacts only.
If the installation does not provide for a protective earth conductor, disconnect it from the power line and
operate it on battery power, if possible.
To avoid explosion hazard, do not use the equipment in the presence of oxygen-rich atmospheres,
flammable anesthetics, or other flammable agents (such as gasoline).
Do not open the equipment housings. All servicing and future upgrades must be carried out by the
personnel trained and authorized by our company only.
Do not come into contact with patients during defibrillation, otherwise serious injury or death could result.
Do not touch the equipment’s metal parts or connectors when in contact with the patient, otherwise patient
injury may result.
Before connecting the equipment to the power line, check that the voltage and frequency ratings of the
power line are the same as those indicated on the equipment’s label or in this manual.
Do not rely exclusively on the audible alarm system for monitoring. Adjustment of alarm volume to a low
level or off may result in a hazard to the patient. Remember that alarm settings should be customized
according to different patient situations and always keeping the patient under close surveillance is the most
reliable way for safe monitoring.
The physiological data and alarm messages displayed on the equipment should be reviewed by a clinician
before being used for diagnostic interpretation and treatment.
To avoid inadvertent disconnection, route all cables in a way to prevent a stumbling hazard. Wrap and
secure excess cabling to reduce risk of entanglement or strangulation by patients or personnel.
Ensure that the monitor is supplied with continuous electric power during work. Sudden power failure may
lead to the loss of patient data.
Never mix patient electrode types or brands. Dissimilar metals or other incompatibilities may cause
considerable baseline drift and may increase trace covery time after defibrillation.

1-3
1.1.3 Cautions
CAUTION
To ensure patient safety, use only parts and accessories specified in this manual.
At the end of its service life, the equipment, as well as its accessories, must be disposed of in compliance
with the guidelines regulating the disposal of such products. If you have any questions concerning disposal
of the equipment, please contact Mindray.
Magnetic and electrical fields are capable of interfering with the proper performance of the equipment. For
this reason make sure that all external devices operated in the vicinity of the equipment comply with the
relevant EMC requirements. Mobile phones, X-ray equipment or MRI devices are a possible source of
interference as they may emit higher levels of electromagnetic radiation.
Before connecting the equipment to the power line, check that the voltage and frequency ratings of the
power line are the same as those indicated on the equipment’s label or in this manual.
Always install or carry the equipment properly to avoid damage caused by drop, impact, strong vibration or
other mechanical force.
Dry the equipment immediately in case of rain or water spray.
1.1.4 Notes
NOTE
Put the equipment in a location where you can easily see the screen and access the operating controls.
Keep this manual in the vicinity of the equipment so that it can be obtained conveniently when needed.
The software was developed in compliance with IEC 60601-1-4. The possibility of hazards arising from
software errors is minimized.
When disposing of the packaging material, be sure to observe the applicable waste control regulations and
keep it out of children’s reach.
This manual describes all features and options. Your equipment may not have all of them.
1.2 Equipment Symbols
NOTE
Some symbols may not appear on your equipment.
Caution, consult accompanying documents
Power ON/OFF (for a part of the
equipment) Battery indicator
Alternating current ALARM PAUSED

1-4
AUDIO PAUSED Graphical recorder
Freeze/unfreeze waveforms Main menu
NIBP start/stop key
Output
Equipotentiality VGA output
USB connector
Network connector
Gas outlet Serial number
Inserted direction
DATE OF MANUAFACTURE
This mark means that this device is fully in conformance with the Council Directive Concerning
Medical Devices 84/539/EEC and 2004/108/EC.
AUTHORISED REPRESENTATIVE IN THE EUROPEAN COMMUNITY
Electrostatic sensitive devices
DEFIBRILLATION-PROOF TYPE CF APPLIED PART
DEFIBRILLATION-PROOF TYPE BF APPLIED PART
The following definition of the WEEE label applies to EU member states only.
This symbol indicates that this product should not be treated as household waste. By ensuring that
this product is disposed of correctly, you will help prevent bringing potential negative
consequences to the environment and human health. For more detailed information with regard to
returning and recycling this product, please consult the distributor from whom you purchased it.
* For system products, this label may be attached to the main unit only.
The presence of this label indicates the machine was certified by ETL with the statement:
Conforms to AAMI ES60601-1, IEC60601-1-6, IEC60601-1-8, IEC60601-2-27, IEC80601-2-30,
IEC60601-2-34, IEC60601-2-49, ISO80601-2-55, ISO80601-2-56, ISO80601-2-61
Certified to CSA Std C22.2 No. 601.1, No.60601-1-6, No. 60601-1-8, No. 60601-2-27, No. 80601-2-30,
No. 60601-2-34, No.60601-2-49, No. 80601-2-55, No. 80601-2-56, No. ISO80601-2-61
Intertek
3179617
ETL CLASSIFIED