Mini Gadgets BBSStaketimer User manual

1 Version 1.1
Bush Baby Stealth Staketimer
SKU: BBSStaketimer

2 Version 1.1
THANK YOU FOR PURCHASING BUSH BABY STEALTH
STAKETIMER WITH HIDDEN CAMERA
Please read this manual before operating the camera
and keep it handy.
Your purchase should include:
1 x BBSStakeTimer
1 x 16GB MicroSD Card
1 x MicroSD Card Reader
1 x Manual
1 x Remote Control

3 Version 1.1
GET FAMILIAR WITH THE BBSSTAKETIMER HIDDEN
CAMERA

4 Version 1.1

5 Version 1.1
OPERATING THE BUSH BABY STEALTH CAMERA
Note: If you are not located in the US, or if you intend
to use this product anywhere other than the US, you
will need to purchase a converter in order to use the AC
wall plug in and avoid damaging the product. Because
different countries use different voltages in their
electrical wiring, you will need a converter that adapts
to the current in your particular country.
POWERING THE DEVICE
1. This device is operated by plug-in power only.
You will need to plug the device’s power source
into a functioning electrical outlet in order to
operate the device.
HOW TO TURN ON THE CAMERA
1. Point the remote control towards the front of
the Router, and press the “Power Button” (see
page 4).
2. The camera is now in Standby Mode.

6 Version 1.1
NOTE: If the light doesn’t come on, try many
different angles when pressing the power button
and pointing it at the front of the device. Do not
hold down the power button. Press and release
the button only.
HOW TO RECORD VIDEO
1. When the camera is in Standby Mode, press the
“Video Button” (see page 4). The indicator LED
will flash three times.
2. Once the indicator LED turns off, the camera is
now recording video.
HOW TO STOP RECORDING VIDEO
1. While the camera is recording video, press the
“Video Button” once more. (The indicator LED
will turn on.)
2. The camera has now stopped recording and is
now in Standby Mode.
HOW TO TAKE PICTURES

7 Version 1.1
1. When the camera is in Standby Mode, press the
“Photo Button” (see page 4). The indicator LED
will flash once.
2. Once the indicator LED flashes, the picture has
been taken.
HOW TO RECORD MOTION DETECTION
1. In Standby mode, press the Motion Detection
button one time (see page 4). The indicator
light will flash three times and then turn off.
2. The unit is now in motion detection mode and
will begin recording video once motion is
detected. There will be no LED indicator to
indicate when motion is detected.
HOW TO STOP RECORDING MOTION DETECTION
1. While the camera is recording motion
detection, press the “Motion Detection Button”
once more. (The indicator LED will turn on.)
2. The camera has stopped recording motion
detection and is now in Standby Mode.

8 Version 1.1
MICROSD CARD SLOT
To access the MicroSD Card Slot, you must open the
device.
1. Gently push the MicroSD Card into the slot. The
gold contacts on the card will be inserted first,
and they should face the main circuit board.
You will feel some spring resistance before the
card clicks in to place.
a. Never force the card into the Card Slot
under any circumstances. Otherwise,
the unit or the MicroSD card itself will
be damaged.
2. To remove the SD card, gently push the card in
so that it clicks. The internal spring tension will
eject the card.
MicroSD cards 65GB and above will require special
formatting to work. The device will not function with
these cards if they are not properly formatted
beforehand.

9 Version 1.1
Visit www.mgidownloads.com/Software and download
the “guiformat.zip” file. Extract the files and follow the
instructions in the “64GB SD Card Formatting.pdf”
document.
IMPORTANT NOTICE: Ensure that the device is off
before inserting the MicroSD card. Otherwise potential
corruption of the card file(s) may occur.
SETTING THE DATE/TIME STAMP
You will need to remove the MicroSD card from the
device and insert it into your computer.
1. Visit http://time.mgidownloads.com/
2. Choose “All Bush Baby Stealth” from the device
SKU dropdown.
3. Choose your time zone from the time zone
dropdown.
4. Click Submit.
5. The appropriate time file will be downloaded to
your computer’s “downloads” folder.
6. Open your “downloads” folder on your
computer.

10 Version 1.1
7. Find the time file that was downloaded. (It
should be the most recent download and the
name will match what you saw in your browser
download notification).
8. Right click on the file and choose “Copy”.
9. Locate “Removable Disk” inside the (My)
Computer folder.
AutoPlay Removable Disk > Open folder
to view files
Or…