Mini Gadgets HS580 User manual

5.8GHZ WIRELESS
CAMERA SYSTEM
SKU: HS580
THANK YOU FOR PURCHASING THE HS580
Please read this manual before operating the 5.8 GHz wireless camera
system and keep it handy.
Our latest wireless camera features 5.8 GHz technology to help
eliminate interference from today’s saturated 2.4 GHz band. It's
perfect whether you need a nanny camera, home or business
surveillance, or automobile security.
5.8 GHz circuitry ensures no lost video due to external wireless
devices, such as Wi-Fi and cellular. The transmitter uses the 5800
MHz (5.8 GHz) channels to help eliminate interference from devices
such as wireless routers. The range is up to 50 meters. Setting up the
camera could not more painless. Simply connect the included AC
adapter to the camera, then attach the wireless receiver to the VCR
or television. That's all there is to it. Covert video surveillance has
never been easier. Its tiny size makes hiding this camera no problem.
Hide in a plant, a book, a video case, air vent, automobile, the only
requirement is to make sure the small lens is facing the video
surveillance target. When properly placed, the wide camera angle will
give you a complete view of a normal size room.
Your purchase should include:
1 x 5.8 GHz Wireless Camera System
1 x Perfectly Matched 5.8GHz Wireless Receiver
1 x Video Cable for Receiver to VCR/TV Hook Up
2 x AC Adapters (1 for camera, 1 for receiver)
1 x 9V Adapter (for camera)
1 x Instruction Booklet

GET FAMILIAR WITH YOUR HS580 OPERATING THE HS580
SET UP
RECEIVER
1. Insert the DC Power Adapter into the DC Input Port on the
Radio AV Receiver
2. Plug the DC Power Adapter into a power source
 The red indicator light will turn on
3. Insert the yellow AV cable into the Video Out Port
4. Insert the white AV cable into the Audio Out Port
5. Insert the other yellow AV cable into the Video In Port of your
TV monitor
6. Insert the other white AV cable into the Audio In Port of your
TV monitor
7. Open and adjust the Antenna
TIP: The camera and receiver should be set up between 50-100m
apart
CAMERA
1. Insert the DC Power Adapter into the DC Input cable of the
Camera
2. Plug the DC Power Adapter into a power source
3. Point the Camera in the direction you want to monitor
TIP: If the video or audio is not working adjust the channel switch on
the Radio AV Receiver
IMPORTANT NOTICE: To prevent interference do not place more
than one camera with the same frequency within the same 50-100m
area
Antenna
Video
Out Port
Audio
Out Port
Indicator
Light
DC Input
Port
Channel
Switch
Camera
Mic
DC Input
Cable

TROUBLESHOOTING
THE DEVICE WON’T TURN ON
 Charge the device for at least 4 hours before the first use
 Make sure the charging cable is securely inserted into the
device and into the power source
THE DEVICE ISN’T CHARGING
 Replace the battery or charging cable
 If you are charging via a wall power source, you may need to
charge via your PC. The AC adapter might be bad
THE SOUND OR VIDEO IS UNCLEAR
 Adjust the channel switch
 Ensure all the cables are inserted completely
OTHER PROBLEMS
 Call our technical support at 770–694–6923