MinimumRC Sopwith Camel User manual

Sopwith Camel
Assembly Instruction
Precautions:
·When using foam glue, apply the glue to the bonding surface, dry for 1-2 minutes before
bounding the parts.
·When parts are difficult to remove, use tool to cut it out.

Part distribution

1.
2. Apply cockpit interior stickers

3. Pre-bend the skin before installation and check the position match.
4.
.

5.

6. Pre-bend the skin before installation and check the position match.
7.

8.
9. Pre-bend the skin before installation and check the position match.

10.

11.
12.

13.
14.

15.
16. Bend the bottom of the wing support at a width of 3mm.

17. Paste the cockpit exterior sticker before installing the wing support.
18.

19.
20. Paste horizontal tail reinforcement.

21．
22. Carve a crease at a distance of 20 mm from the leading edge of the wing

23. Paste wing reinforcement sticker

24. Install the ribs. Please note: there are no ribs on the outermost side of the wing.

25.The side of the fuselage has an indentation corresponding to the wing installation position.
26.

27.
28.

29.
30.