MINOS T-MDR 1000 User manual

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
MINOS DIS TICARET LIMITED SIRKETI
Fatih Mah. 1191 Sok. No: 17/A 35414 Gaziemir/ IZMIR-TURKEY
Ph:[phone] - 281 63 30 (31) Fax: [phone]
Web: www.minosagri.com E-mail: [email protected]
www.facebook.com/minosagri www.twitter.com/turkaygrup
Introducing & Operating Manual
En
READ ALL WARNINGS AND INSTRUCTIONS
IN THIS MANUAL BEFORE INSTALLING OR
OPERATING THE MINOS MINI POWER
HARROW! Failure to heed this may result
in personal injury or death!
MINI POWER HARROW
(T-MDR 1000/ T-MDR 1250/ T-MDR 1500/
T-MDR 1750/ T-MDR 2000/ T-MDR 2250)

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
EC DECLARATION OF CONFORMITY
TURKAY TARIM MAKINALARI SAN. TIC. LTD. STI.
Fatih Mahallesi 1191 Sok. No: 17/A 35414 Gaziemir/ IZMIR / TURKEY
Declare under our own responsibility that the product(s) specified below satisfies the requirements
of the Machinery Safety Directive 2006/42/EC.
The product(s) identified below has been produced according to basic safety and health measures.
BRAND: minos agri
PRODUCT TYPE: MINI POWER HARROW
PRODUCT CODE: T-MDR 1000/ T-MDR 1250/ T-MDR 1500/ T-MDR 1750/ T-MDR 2000/ T-MDR 2250
Harmonized standards:
EN ISO 4254-1 (18.04.2016)/ Agricultural machinery - Safety - Part 1: General requirements
EN ISO 12100:2010 (12.04.2011)/ Safety of machinery - General principles for design - Risk
assessment and risk reduction
EN ISO 13857 (29.04.2014)/ Safety of machinery - Safety distances to prevent hazard zones being
reached by upper and lower limbs
EN 349+A1:2009 (19.02.2009)/Safety of machinery - Minimum gaps to avoid crushing of parts of the
human body
EN ISO 14120 (18.04.2016)/ Safety of machinery - Guards - General requirements for the design and
construction of fixed and movable guards
ISO 11684 (02.02.1999)/ Tractors, machinery for agriculture and forestry, powered lawn and gurden
equipment- safety signs and hazard pictorials- general principles
EN ISO 4254-5 (19.01.2010) /Agricultural machinery - Safety - Part 5: Power-driven soil-working
machines
Issued at IZMIR-TURKEY, January 07.2019 Authorized Signatory
Erhan HAFIZOĞLU (Technical Manager)

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
WARRANTY CERTIFICATE
MINOS warrants, for the period of 2 year.
Machine details
WARRANTY CONDITIONS
BRAND
PRODUCT NAME
MODEL
PRODUCT CODE
SERIAL NUMBER
MANUFACTURE YEAR
● Warranty period is two (2) year commencing from the delivery
date of the product.
● The product and all parts thereof are under the warranty of our
company.
● If the product breaks down during the warranty period, the period
of repair is added to the warranty period. The maximum period of
repair of the product is 20 working days. This period starts when the
product is delivered to a service centre, or in absence of a service
centre, to the seller, dealer, agency, representative, importer or
manufacturer in order.
● In the event that the product breaks down due to material or
workmanship faults or installation faults, it will be repaired free of
charge, without charging any fees due to labour, replaced part or
anything else.
● In the following events, the product shall be replaced free of
charge:
I-The product repeats the same defect more than twice or different
faults more than four in one year, however, in any case within the
warranty period, and as a result, periods during which meter is out
of service become continuous.
II-Maximum period necessary for its repair is exceeded.
III-With a report issued by a service centre, or in absence of a service
centre, by the seller, dealer, agency, representative, importer or
manufacturer in order, the repair of the meter is determined as
impossible.
● Breakdowns due to improper operation of the product not
observing the instructions in the operating manual are not covered
by warranty
● For problems with the warranty certificate, consumers may apply
to the Republic of Turkey Ministry of Science, Industry and
Technology, General Directorate of Protection of Consumers and
Competition.
● Failures arising from the use of product against the consideration
specified in the user’s guide are unguaranteed.
Seller’s
Title:
Address:
Tel:
Fax:
Date and Number of invoice:
Signature&Seal
MINI POWER HARROW
minos agri
MINOS DIS TICARET LTD. STI.
Fatih Mah. 1191 Sok. No: 17/A 35414
Gaziemir/ İZMİR-TÜRKİYE
Ph: [phone] - 281 63 30/ 31
Fax: [phone]
Web: www.minosagri.com
@: [email protected]

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
This warranty provided by MINOS DIS TICARET LTD. STI. does not cover any faults caused by
any abnormal or unintended use of the meter.
We declare:
● that during the warranty period, the product will operate flawlessly, if you use it in
accordance with its purpose and the enclosed instructions;
● that upon your request, we will repair any defect of the machine if you inform us of it
during the warranty period. The warranty takes effect from the date of purchase of the
product, evident from the certified warranty certificate and the receipt.
● The machine is is specifically designed for agricultural application and is intended to be
used to tillage the soil and prepare the seedbed.
The warranty becomes invalid due to:
● failure to comply with the enclosed instructions;
● damage and faults caused by improper use;
● usage of an unsuitable PTO shaft;
● negligent handling of the product, overloading which leads to the fracture of any parts;
● interference with the product by an unauthorised person;
● damage caused by mechanical shock due to the fault of the buyer or a third person;
● damage caused by flooding, fire, lightning;
● damage and faults caused during transport, shipment, loading and unloading;
● damage and faults caused by fire, lightning, flood and earthquake (natural disasters),
inappropriate environment and accidents;
● faults caused by installation or connection of the meter not in compliance with the
installation and operating manual;
The warranty will be valid only for the period stated on the reverse side of this certificate
and the faults at the product, and no other right or damages under any reason whatsoever
can be claimed. In the events that the warranty certificate is destroyed or defaced, that the
serial number on the product is removed or destroyed, the warranty certificate will become
null and void. Any warranty certificate not bearing the seal and authorised signature of the
seller and the date of sale will not be valid.
MINOS is liable for damages it caused by intentional and deliberate damages, not for minor
negligence. Besides, it will not be liable for the results, including but not limited to the
interruption of business activities or loss from profit due to this reason, or any loss caused as
a result of the failure of a duty due to the breakdown of the product.
If there is any defect in the product, the defective product shall be sent to MINOS with risks
and expenses on customer’s account. The defects of the product will be removed by MINOS
by replacing a new one or repairing the same.
CAUTIONS ABOUT THE WARRANTY

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
When reporting a defect by phone or in writing, please inform our representative of:
● the name, model, serial number and manufacture year of the product;
● the nature of the defect;
● your full address.

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
Dear Customer!
You have purchased one of the best built, most reliable power harrow available and you
have chosen it from our wide product range. Congratulations! We strive to provide you with
a rugged, durable unit which is simple to maintain and we are sure that you will be satisfied
with it. We sincerely thank you for your confidence.
With their strong, powerful and reliable structure, easy-to-use operation and wide model
range that is able to meet any kind of needs, Minos mini power harrow is an essential
equipment that prepares soil for seeding/ planting. In one pass the soil is broken up, weeds
and scrub growth are uprooted, tillage and prepare the seedbed.
Any person who will be operating or maintaining this machine should first read and
understand this manual and meaning of all safety decals.
This introducing and operating manual should always be available to those responsible for
the operation and maintenance of this machine.
It is the owner’s responsibility to provide this safety information to his operators and
employees.
Any person who does not understand the safety and operation instructions contained in this
manual should not be considered qualified to operate this machine.
This manual has been designed to help you become familiar with your unit. Before you
operate your unit, be sure you understand and follow all the operation, lubrication, and
safety instructions on the following pages in this manual. These have been written for your
safety and convenience, and to keep your unit running trouble-free for many years.
This manual should be considered a permanent part of your machine, and should remain
with the machine if you sell it.
In the event that you experience an issue that has not been addressed in this manual,
contact our company for help; you must state the model and serial number of you
equipment in order for us to help you with your inquiry. This is necessary in order to resolve
isues quicker and provide better services.
Regards,
MINOS DIS TICARET LIMITED SIRKETI
Fatih Mah. 1191 Sok. No: 17/A 35414 Gaziemir/ İZMİR-TÜRKİYE
Ph: [phone] - 281 63 30 - 281 63 31 Fax: [phone]
Web: www.minosagri.com E-mail: i[email protected]
THANK YOU FOR CHOOSING MINOS!

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
EC DECLARATION OF CONFORMITY
WARRANTY CERTIFICATE
CAUTIONS ABOUT THE WARRANTY
THANK YOU FOR CHOOSING MINOS!
1-
INSTRUCTIONS FOR SAFE WORK…………………………………….….…..
1
1.1-
Regular Use In Agriculture.…………………………………….………….……
2
1.2-
Accident Prevention and Safety Instructions…………………….…….
2-4
1.3-
Safety Precautions For Transporting ………….……………………..……
5-6
1.4-
P.T.O. Shaft Drive (only for implements driven by a P.T.O
Shaft)………………………………………………………………………………………
6-8
1.5-
Maintenance and Repair……….…………………….………………………….
8
2-
INTRODUCING OF MACHINE…….………………………………..…………..
9
2.1-
Main Parts Description……………………………………………………………
9
2.2-
Basic Description Of Mini Power Harrow………………..……….…..…
10-12
2.3-
Technical Data…………………………………………………………….………….
13
2.4-
Safety Decals…………………….………………………………………….…………
14-18
3-
PREPARING FOR OPERATION…..………………………………………………
19
3.1-
Tractor Requirements……………………………………………………………..
19-21
3.2-
Attaching to the tractor…………………………………………………………..
21-23
3.3-
P.T.O. Shaft Length Adjustment and Fitting………………………….…
23-27
3.4-
Before The Mini Power Harrow Run-in…………………..………..…..…
28-29
4-
OPERATING THE MACHINE……………………………………………………..
30
4.1-
Operator Qualifications…………………………………………………………..
30
4.2-
Operating Instructions……………………………………………….…..……….
30-33
CONTENTSCONTENTS

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
4.3-
Adjustments & Precautions ………………….………………………………..
33-39
4.4-
Stopping & Disconnecting……………………………………………………….
39-41
4.5-
Handling & Transport……..…..………………………………………………….
41-44
5-
PERIODIC MAINTENANCE AND REPAIR……………………………………
45-46
5.1-
Checking The Tightness of Bolts and Nuts……………………………….
46-47
5.2-
Blade Replacement ……………………………………….……………………….
47-49
5.3-
Scraper Plates Replacement (only for packer roller)………..…..…
49
5.4-
Lubrication………………………………………………………………………………
50-52
5.5-
The Periodic Maintenance of The P.T.O. Shaft………………………..
53
5.6-
Cleaning & Washing………………………………………………………………..
54
6-
STORAGE…………………………………………………………………………………
55
7
SCRAPPING…………………………………………………………………………..…
56
8-
TROUBLESHOOTING………………………………………………………………..
57-60
9-
ORDERING OF SPARE PARTS…………………………………………...………
61-62
10-
SPARE PART LISTS…………………………………………………………………...
63-78

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
This first information is no substitute for present instructions for use.
Present instructions for use, informs you most detailed about every single
action which must be taken, from first start of the machine itself, proper and
safe use, over to the maintenance.
Instructions are divided in single chapters with text and illustrations, explaning
practical course of every single step during use of machine. Due to upper facts
please read carefully these instructions, before you start using the machine and
take into consideration all security regulations.
Important!
To avoid accidents and for acheiving optimal working –capacities of the
machine, any kind of tecnical changes without strict concordance from the
side of producer is strictly forbidden. In such a manner also the machine must
be used exsclusively according to from MINOS prescribed conditions.
● The Safety Alert Symbol used
throughout this manual and on
safety decals of the machine
indicates the presence of
potential hazard to the operator.
When you see this symbol, be
alert and carefully read the
message that follows it.
● This symbol is to be found on
different spots in these informations,
showing at special procedure
informations which must be specially
considered during the use of machine.
● Before starting the machine, read carefully this instructions for use,
maintenance and safety instructions.
● This instructions booklet is part of the machine itself and must always
with the machine. Also in the case that machine is sold to another owner.
1- INSTRUCTIONS FOR SAFE WORK
1

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
The machine is is specifically designed for agricultural application and is
intended to be used to tillage the soil and prepare the seedbed. If the machine
is used for any other purpose, and get damaged during this, the manufacturer
is not liable for the damage caused to the machine. It is the user himself who
bears the risk.
All conditions for work and maintenance, prescribed by the manufacturer,
should strictly be considered.
The machine may only be used, handled and repaired by persons who are
appointed to do this and who are familiar with the instructions for safe work,
with settings and with maintenance of the machine.
All relevant safety regulations as well as all generally used safety tehnical,
working-medical and traffic regulations should be considered during the work
with the machine.
When the mini power harrow is in operation it has many moving parts which
could cause severe injury or death to persons coming in contact with these
parts. To help avoid serious accidents, the following guidelines should always
be followed:
● Be sure all safety guards are in place before operating, including tractor PTO
driveline covers.
1.1- Regular Use In Agriculture
● The manufacturer is not liable for damages, caused to the machine which
has been rebuilt by the user, if damages had occured as a result of the
rebuilding.
1.2- Accident Prevention and Safety Instructions
2

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
● Do not try to pull out jammed materials between blades while it is running.
Moving parts can be hidden by materials, and stopped parts can start
unexpectedly, causing severe injury. Always stop engine and remove PTO
driveline before attempting to remove jammed material or to clean.
● Do not allow operation of this machine by inexperienced and unqualified
people. Keep all unqualified people away from machine during operation.
Operators of this unit must be alert and use good judgement at all times.
● Do not wear loose clothes while operating this unit. Loose clothes may
become entangled in moving parts. Clothes should fit tight to the user's body.
● Be sure the inside of tillage tool is clear of any obstructions and that all
shields are in place before operating. Repair or replace any damaged or missing
shielding. Exposed shafting due to missing shielding can grab hands and
closthing and cause severe injury or death.
● Should a problem occur during operation of power harrow, always stop
engine and remove PTO driveline before investigating problem. If power source
has not been disconnected, the machine may start unexpectedly, causing
severe injury or death.
● Besides the instructions from this booklet take into consideration all
generally used safety and accident regulations!
● NEVER put arms, feet inside tillage tool, nor step on the machine while it
is running. NEVER allow anyone to position themselves over or near the
top of the machine while it is running. Rotors, shafts, … etc. can grab
clothes or create pinch points which can cause severe injury or death to the
operator or bystanders. Always stop engine and remove the P.T.O. Shaft so
that the blades rotors cannot be accidentally turned on while inspecting,
servicing, repairing, or cleaning machine.
3

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
● Safety and warning decals, placed on the machine, give important
instructions for safe work. Take them into consideration for your safety!
● Make sure you get familiar with all devices and elements for handling and
with the functions, before starting with the work!
● To avoid danger of fire, keep the machine clean!
● Before switching on the machine and driving off, make sure there is noone
near the machine (children). Make sure your visibility is sufficient!
● It is prohibited to drive persons on the machine!
●It is prohibited to be in the working and dangerous area of the machine!
● Stay away from the area of swinging and turning of the machine!
● Pay special attention while cleaning the power harrow. The machine must be
switched off, PTO Shaft must be disconnected from the machine. It is forbidden
to step on the machine while it is connected to the tractor; there is danger of
being pulled between the blades rotors.
● PTO Shaft, tillage unit etc. May be put in action only when no one is in the
swinging area!
● On all parts of the machine, which are mecanically driven, there is danger of
shear and squeeze!
● Secure the machine before leaving the tractor. Lower the machine
completely.
● Switch off the engine and pull out the ignition key!
● Stop operating immediately if blades strike a foreign object. Repair all
damage and make certain that rotor and blades are in good condition before
resuming operation.
4

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
● Never use the machine to transport or lift people, animals or objects.
● Never leave the driver seat during driving!
● When transporting a mini power harrow, use reduced speed and be sure the
tractor has adequate weight and brakes to carry and stop.
The weight of the tractor should be as follows:
● Machine weight ≤0,3T (T = Tractor wt. + Ort. 75 kg operator)
● The machine should never be carry over 20 mph (32,18 km/h) (See section
3.1).
● Do not exceed 20 mph (32,18 km/h) when traveling over smooth dry areas,
and reduce speed when traveling loaded and/or over rough, soft, or wet
terrain. Exercise caution on side slopes and when turning corners.
● Always place the charging weights according to the instructions on the
provided fastening points!
● Respect prescribed pay load, axle load and transport dimensions!
1.3- Safety Precautions For Transporting
●Before driving on roads, the machine must be in transport position
adequately raised from the road surface, with tractor lifting hydraulics
locked so that the machine cannot be lowered accidentally.
5

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
● Transport equipment on machine and tractor is to be tested for traffic safety
before each use: lights, protections etc!
● For driving on the road, prepare and secure the machine according to the
manufacturers instructions!
● Travel speed should always be adapted according to the terrain and surface
conditions! Avoid quick turns when driving uphill, downhill or perpendicular to
the slope!
● The performance during driving and the ability of turning is changed, when
there are machines connected or mounted to the tractor. Pay attention to
sufficient ability of turnning and braking!
● In turnnings, take into consideration the load which is outside the centre of
gravity and/or constant weight of the machine!
● Avoid operating the power harrow when making sharp turns or crossing
gullies or ditches.
● When working on slopes or inclines, travel uphill or downhill. Keep the
tractor transmission in gear when going uphill or downhill. Avoid driving on
loose fill, rocks, severe inclines, ditches, and holes.
● Always park the machine on level ground.
● When carring a power harrow with a tractor on a public road, always use the
tractor’s FLASHING AMBER LIGHTS. If the tractor’s flashing lights or taillights
are obscured by the machine, the reflector must be used.
● Only use PTO shafts which are designed for the machine by the manufacturer
and which are equipped with all legally requested guards!
● Please also observe the operator's manual of the PTO shaft manufacturer.
1.4 - P.T.O. Shaft Drive
6

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
● Working with damaged guards is prohibited.
● Guard tube and guard cone of the PTO shaft must not be damaged and the
guard of the tractor and machine universal joint shaft must be fitted and in a
proper condition.
● Fit and remove the PTO shaft only when the PTO shaft is stopped, engine is
stopped, parking brake is applied, ignition key is removed.
● Ensure correct fitting and securing of the PTO support!
● Prevent PTO guard from spinning by fixing the provided chain to a nearby
static part!
● On PTO shafts always ensure the tube has sufficient overlap in transport and
operating position. (Observe instruction manual of the PTO shaft
manufacturer)
● When travelling in curves mind the permissible angling and sliding length!
● Prior to switching on the universal joint shaft ensure that the chosen
universal joint shaft speed of the tractor coincides with the permissible drive
speed of the machine.
●Prior to switching on the universal joint shaft advise people to leave the
danger area of the machine.
●When operating the universal joint shaft no person is allowed to stay within
the area of the rotating universal joint shaft or of the PTO shaft.
●Never switch on the tractor PTO while the engine is stopped!
● Always stop PTO when it is not needed or when the shaft is in an adverse
position!
●WARNING! Danger of injury! After switching off the PTO the mounted
machine may continue to run by its dynamic masses! During this period never
come too close to the machine. Begin work on the machine only after it has
come to a full standstill!
7

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
●Secure the tractor and the machine against unintional start-up and rolling
before carrying out any cleaning, greasing or setting work on universal joint
shaft driven implements or PTO shafts.
●Deposit removed PTO shaft on the provided carrier!
● When travelling in curves mind the permissible angling and sliding length!
● When using the ground-related PTO take note that the PTO speed is related
to the forward speed and that the sense of rotation reverses when backing up!
● Maintenance, repair work, cleaning and disturbance removing may only be
executed when the drive and the engine are switched off and the ignition key is
pulled out!
● Regularly check the nuts and bolts for a firm seat and retighten them as
necessary.
● If the machine or parts of the machine are raised, secure them against
unintentional lowering before cleaning, maintaining or repairing the machine.
●When replacing work tools with blades, use suitable tools and gloves.
●Dispose of oils, greases and filters in the appropriate way.
●Disconnect the cable to the tractor generator and battery, before carrying
out electrical welding work on the tractor and on attached machines.
● If safety devices succumb to usage, must be checked regularly and replaced
in due time!
● Use only genuine spare parts, they guarantee long lifetime of the machine!
1.5- Maintenance and Repair
8

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
Figure 1- Main parts of the machine
Part
No.
Description
Part
No.
Description
1
Gearbox input shaft
8
Blades
2
Gearbox input shaft cover
9
Side guide plate
3
Gearbox
10
Rear roller
4
Rear PTO
11
Multi-hole depth adjustment
plate for rear roller
5
Frame
12
Front guard plate
6
Lower hitch
13
Kickstand
7
Upper hitch
14
Transit-mode lightening
(Optional)
Table 1- Main parts of the machine
9
2- INTRODUCING OF MACHINE
2.1- Main Parts Description

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
The power harrow model MDR is equipped with a rear roller and
specifically designed for agricultural application and must be used for
mechanical soil tillage and seed-bed preparation on farms, in vineyards and
orchards, as well as for row crops and speciality crops.
Moisture remains in the soil and the water balance of the soil is maintained
since the soil is not turned up as it is tilled. The vertically rotating cutters also
prevent compaction of the soil, thus resulting in optimum preparation of the
seed-beds.
The mini power harrow allows a very good job of seedbed levelling and
finishing, with rich production of fine soil homogeneously distributed on the
ground surface, and is used at best in operations on tough soils, not subjected
to excessive action of the atmospheric conditions (for example, for the
preparation in autumn-winter season of a cereal's seedbed, following to a
summer crop).
The rear roller, supported by a frame linked to the side plates of the machine
by means of two swinging arms, allows the working depth control and the soil
levelling. The working depth should be adjusted in line with the prevailing
ground conditions in order to obtain the best possible results. Large objects
should be removed from the ground beforehand so that the soil can be tilled
correctly and to prevent premature wear on the tines.
Depending on the characteristics of the soil and the desired result, the
following types of roller can be used:
Cage roller: is suitable for dry soils or with medium-low degree of humidity. It
allows to control the working depth, level the worked soil, and complete the
refinement of the seedbed.
2.2- Basic Description Of Mini Power Harrow
10

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
Figure 2- Cage roller (Ø 315 mm)
Packer roller: is suitable for any type and condition of soil. It is recommended
for heavy soils and for soil preparation in combination with a seed drill. Allows
to refine the surface of the seedbed, and has a great effect leveling and
crumbling on the surface and in depth.
Figure 3- Packer roller (Ø 380 mm)
The mini power harrow, mounted on the tractor by means of the hydraulic
three-point linkage, operates on the ground thanks to its front ripper and to
the dynamic action of vertical tools (blades) placed on the rotors, driven -
through a gears transmission - from the tractor PTO by means of the PTO shaft
connection. Each rotor composes of two blades, with opposite rotation
compared to the contiguous rotors. The PTO shaft is equipped with a friction
clutch safety device to preserve the machine's transmission from excessive
overloads.
11

© Copyright MINOS DIS TICARET LIMITED SIRKETI., 2020. All rights reserved. Reprinting, even of sections, only possible with the approval of
MINOS DIS TICARET LIMITED SIRKETI. Document No: T-MDR.2020_I.O.M./ Date: 09.01.2020
Standard equipments
● The models MDR 1000, 1500 and 2000 are equipped with changeable speed
gearbox. Nominal rev. speed max. 540 , rotor rotations are 182,3 or
344,7 r.p.m. depending on the spur gear location.
●The models MDR 1250, 1750 and 2250 are equipped with single speed
gearbox. Nominal rev. speed max. 540 , rotor rotations are 250,7 r.p.m.
● 3-point hitch, Cat. 2
● Rear roller
● Multi-hole depth adjustment plate for rear roller
● Blades having a single central pin: working depth about 22 cm
●PTO Drive shaft is a series 6, tractor side is a 1 3/8" Z6 push pin yoke,
machine side is a 1 3/8" Z6 friction limiter clutch safety device, closed length is
930 mm.
Optional equipments
● Cage or packer type roller
● The power harrow can be combined with the APVPneumatic seeder or any
other seeder.
● Transit-mode lightening
Figure 4- Signalling plate (Recommended for both right and left side)
12