MISUMI MP-550 User manual

90
20
40
unit:mm
Mini USB
Phone jack (Camera)
Battery cover open / SDHC
Battery
SDHC
LED Light
REC / STOP (ONE Key Play)
Snapshot
Power ON/OFF
ON
OFF
(Charge)
Specification
Improve the SD SDHC Card 4GB ~32GB compatibility MP-550 support for SDHC, SDHC card(OVER 4GB~32GB)
must be special format processing ! through the pc to format SDHC Card Fat32 block size 16k
Format SDHC
process:
WINDOWS SYSTEM
1.Click [Start],
2.then click the [running] 'button',
3. [Open] box, type: ”diskmgmt.msc”, and then click [OK],
then Right-click on SDHC CARD DISK and format block size 16 or 32K
PP:Power DC 5V
G:GND
V:VIDEO
A:AUDIO
VA
G
USB Cable Cable for camera
(model:AF-PDRR12-01)
Cable for TV
(model:AF-PDRR05)
AF-224SDHC 2GBatteryMP-550
Instruction Drawing & Description
VIDEO REC. /ON
REC. MODE
SNAPSHOT MODE
VIDEO REC. /STOP
press start recording
press stop recording
Blue light:SD Cared not be inserted or SD Cared
Memory Full
Red light:power charge
Red light(flash):recording
Red light(flash one time):Snapshot
LED LIGHT
Enlarge
Female
12
3
4
1. VIDEO2. DC 5 V
3. GND
Male Plug Form Camera
1. VIDEO 2. DC 5 V
3. GND
12
34
Interface for Female Plug Male
055-PMledoM
640x480(VGA) / max 30 fps.
Simple Style PVR Mamual
SD Card memory slot (support up to 32 GB)
AV recorder resolution
External Memory
Compression
Video
Video Output
Function
Dimension
PC Interface
MPEG 4 ASF file
Synchronized audio & video recording/ playback
TV out /AV in (NTSC/PAL)
AV In Mode ,
Rec Mode ,
SD card Update ,
Snapshot ,
motion detect ,
loop overwrite ,
RTC date and time stamping
USB1.1
Power charge DC 5V(450mA)
40 x 90 mm
(Camera-optional)
A
B
A
A
SNAPSHOT
press start snapshot.
B

MP-550
1. USB cable support PC transmission function and support power charge(Charge Battery must be turned off MP-550)
Computer
Connect
Connect with computer Connect with TV
3. After power on , AV cable connect MP-550 that will preview mode.(it’s better copy or cut video file into the computer hardware then play.
Video file be played directly will cause unsmooth play, the reason is that gigantic data can’t be transmitted synchronously)
4. After power on ,AV cable connected MP-550 ,that will playback mode.
2. After power on ,USB cable connected MP-550 ,that will into USB Mass Storage Device
TV
RCA Video out(Yellow)
RCA Audio out (White)
DC 5V Power input-optional
(Cable model : AF-UDRR05)
PLAY BACK
Setting Motion Detect Area
Motion Detect Area must be detected by
around of screen
Motion detect and
Loop Overwrite operation normally
have to 4 GB SD card or more than 4GB SD card.
Boot after waiting for about 10 ~ 15 sec and off power, The system will read and delete the configuration file
(do not perform other operations, will lead to a configuration parameter can not be saved)
1.SD connected computer and add folder “MISC”
2.After open “MISC” folder and then add TXT file “SYSCFG.TXT” and type:
(Changing the TXT file to start what you need system)
Date=year-month-date
[COMMON]
DATE=2010-04-26
TIME=09:25
// NTSC/60, PAL/50
SENSORTYPE=NTSC
TVTYPE=NTSC
TVFREQHz=60
RESET=0
[DVINFO]//60, 50
SENSORFREQHz=60
// NORMAL, CYCLE, MOTION, MOTION_CYCLE
DVRECTYPE=NORMAL
DVRECTIMEBAR=YES
[DSCINFO]
#END
time=Minutes:seconds
NTSC or PAL
NTSC or PAL
NTSC=60 or PAL=50
NTSC=60 or PAL=50
NORMAL, CYCLE, MOTION, MOTION_CYCLE
YES or NO
screen
Detect area
MOTION MODE: When motion trigger started the SHDC card will save video file in every 30 sec. until card menory full
MOTION_CYCLE MODE: When motion trigger started the SHDC card will save video file in every 30 sec..If the menory card full, the video file will be overwrite
in automatically
NORMAL MODE: Recording ,the SHDC card will save video file in every 30 minutes until card menory full
CYCLE MODE: Recording ,the SHDC card will save video file in every 30 minutes .If the menory card full, the video file will be overwrite in automatically