Mitac Mx1-10fep series User manual

MX1-10FEP Series

User Manual

V1.6

Master Series Embedded System

Intel®Coffee Lake Xeon-E / Core-i Processors

Powerful, Versatile, and Rugged & Reliable

1. Loosen M3 screws(x 4) from Bottom cover as

the arrow locations.

5. Tighten M3 screws(x 4, pack 452D80500006) for

2.5” SSD and M2.5 screws(x 2, pack 452D80500005)

for SATA cable.

6. Tighten M3 screws(x 4) for internal SSD bracket

and insert SATA cable to main board.

7-1. Loosen M4 screws(x 4) from Mid-Frame.

7-2. Loosen M3 screws(x 2) from Rear-Cover.

8. Fix CPU heat-sink by M3 screws(x 4, pack

452D80500002) as arrow shown.

9. Install DRAM with thermal pads. (thermal pad

345D80500011 between two DIMMs, thermal pad

345D80500012 between bottom DIMM and PCBA)

MX1-10FEP-D Quick Assembly Guide

Assembly of PCIe Bracket and Holder

Install 2.5” SSD into Internal SSD Bracket Fix Internal SSD Bracket

Disassemble Mid-Frame CPU Heat-sink Installation DRAM Installation

Open Bottom Cover

5615D8050002

4. Loosen M3 screws(x 4) as the arrow directions.

Disassemble Internal SSD Bracket

2-1. Loosen M3 screws(x 4) from HDD cover.

2-2. Remove M3 screw from bracket.

2-3. Pull/push HDD bracket by handle bar.

Install/Remove Removable 2.5” HDD

(Top)

(Bottom)

3-1. Loosen M3 screws(x 4) from PCIe bracket.

3-2. Install PCIe card and fix with M3 screws( x 2).

3-3. Fix Holder to hold card with M3 screw (x 1).

MX1-10FEP-D GFX / AI Card Options

Model Name

Display Connectors

Memory

TDP

NVIDIA Quadro P400

3 x mDP1.4

2GB GDDR5

30W

NVIDIA Quadro P620

4 x mDP1.4

2GB GDDR5

40W

NVIDIA Quadro P1000

4 x mDP1.4

4GB GDDR5

47W

NVIDIA Quadro P2200

4 x DP1.4

5GB GDDR5

75W

NVIDIA Tesla T4

N/A

16GB GDDR6

70W

NVIDIA Tesla P4

N/A

8GB GDDR5

75W

Aetina GTX1050 N1050-J9FX

1 x HDMI2.0b

1 x DP1.2

1 x DVI-I

2GB GDDR5

75W

Leadtek WinFast GTX1030

1 x HDMI

1 x DVI-D

2GB GDDR5

30W

Leadtek WinFast GTX1650

1 x HDMI2.0b

1 x DVI-D

4GB GDDR5

75W

Leadtek WinFast GTX1650

1 x HDMI2.0b

2 x DP1.4

4GB GDDR5

75W

Leadtek WinFast GTX1660 HURRICANE

1 x HDMI2.0b

1 x DP1.4

1 x DVI-D

6GB GDDR5

120W

Leadtek WinFast GTX1660 SUPER

HURRICANE

1 x HDMI2.0b

1 x DP1.4

1 x DVI-D

6GB GDDR6

125W

Leadtek WinFast GTX1660 Ti HURRICANE

1 x HDMI2.0b

1 x DP1.4

1 x DVI-D

6GB GDDR6

120W

PREFACE

document may be reproduced, copied, translated, or transmitted in any form or by any means,

electronic or mechanical, for any purpose, without the prior written permission of MiTAC Corp., Ltd.

All information and specification provided in this manual are for reference only and remain subject to

change without prior notice.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits and/or

software described or contained in this manual in order to improve design and/or performance. We

assume no responsibility or liability for the use of the described product(s) conveys no license or title

under any patent, copyright, or masks work rights to these products, and make no representations or

warranties that these products are free from patent, copyright, or mask work right infringement,

unless otherwise specified. Applications that are described in this manual are for illustration purposes

only. We make no representation or guarantee that such application will be suitable for the specified

use without further testing or modification.

Declaration of Conformity

FCC

This equipment has been tested and found to comply with the limits for a

class "A" digital device, pursuant to part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at him own

expense.

This equipment is in conformity with the requirement of the following EU

legislations and harmonized standards. Product also complies with the

Council directions.

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections

while the power is on. Sensitive electronic components can be

damaged by sudden power surges. Only experienced electronics

personnel should open the PC chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before touching

the CPU card. Modern electronic devices are very sensitive to static

electric charges. As a safety precaution, use a grounding wrist strap at

all times. Place all electronic components in a static-dissipative

surface or static-shielded bag when they are not in the chassis.

Safety Precautions

For your safety, please carefully read all the safety instructions before using the device. All cautions

and warnings on the equipment should be noted. Keep this user manual for future reference.

*Let service personnel to check the equipment in case any of the following problems appear:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well or you cannot get it to work according to the user manual.

The equipment has been dropped and damaged.

The equipment has obvious signs of breakage on the surface.

Ordering Information

Model Number

Description

MX1-10FEP-C246

Fanless Embedded System with Intel® C246 Chipset.