Mitsubishi Electric PAR-31MAA User manual

PEAD-RP(M)JAA - PEA-RP(M)GAA-WJA and SEZ-KD
Static Pressure Matrix
PAR-31(2)MAA
Static Pressure settings are different from model to model.
To increase or decrease the static pressure follow the steps outlined below;
1. Turn the controller OFF.
2. Select Menu using button.
3. Select Service using the down curser key (F1)
4. Enter Maintenance password default 9999 using (F1, F2, F3, F4 keys)
5. Press key to acknowledge.
6. Select Function setting using (F1 and F2) Keys
7. Press key to acknowledge
8. Select Ref. address of the unit to be changed (F1 and F2)
Select All for the refrigerant group using (F3 and F4)

9. Press key and the controller will collect data.
10. Select Mode 08 and 10 using (F1 and F2) keys
11. Select the Static pressure according to model listed in the table below. (F3 and F4) keys
Static Pressure settings for applicable units below
PEA-RP(M)100-140GAA
PEAD- RP(M)71-140JAA
PEA-RP140-200WJA
SEZ-KD-VAQ
1. Press key to acknowledge. Controller will send data to the indoor unit.
2. Press the return key twice the display will say “exit function settings please wait”
3. To return to the home screen, keeping pressing the return key.