Mitsubishi Electric PKFY-P63VKM-E User manual
OPERATION MANUAL
For safe and correct use, please read this operation manual thoroughly before operating the air-conditioner unit.
BEDIENUNGSHANDBUCH
Zum sicheren und einwandfreien Gebrauch der Klimaanlage dieses Bedienungshandbuch vor Inbetriebnahme
gründlich durchlesen.
MANUEL D’UTILISATION
Pour une utilisation correcte sans risques, veuillez lire le manuel d’utilisation en entier avant de vous servir du
climatiseur.
BEDIENINGSHANDLEIDING
Voor een veilig en juist gebruik moet u deze bedieningshandleiding grondig doorlezen voordat u de
airconditioner gebruikt.
ISTRUZIONI DI FUNZIONAMENTO
Leggere attentamente questi istruzioni di funzionamento prima di avviare l’unità, per un uso corretto e sicuro
della stessa.
MANUAL DE INSTRUCCIONES
Lea este manual de instrucciones hasta el final antes de poner en marcha la unidad de aire acondicionado
para garantizar un uso seguro y correcto.
MANUAL DE OPERAÇÃO
Para segurança e utilização correctas, leia atentamente o manual de operação antes de pôr a funcionar a uni-
dade de ar condicionado.
FOR USER
PARA O UTILIZADOR
PARA EL USUARIO
PER L’UTENTE
VOOR DE GEBRUIKER
POUR L’UTILISATEUR
FÜR BENUTZER
INDOOR UNIT
2
GB
When you need to dispose of the unit, consult your dealer.
.
: Indicates a part which must be grounded.
1. Safety Precautions .................................................................2
2. Parts Names...........................................................................3
3. Operation................................................................................7
4. Timer.....................................................................................10
5. Emergency Operation for Wireless Remote-controller.........10
6. Care and Cleaning................................................................11
7. Troubleshooting....................................................................13
8. Specifications .......................................................................15
Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be
recycled and/or reused. This symbol means that electrical and electronic equipment, batteries and accumulators, at their end-of-
life, should be disposed of separately from your household waste. If a chemical symbol is printed beneath the symbol (Fig. 1), this
chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration.
This will be indicated as follows: Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)
In the European Union there are separate collection systems for used electrical and electronic products, batteries and accumulators.
Please, dispose of this equipment, batteries and accumulators correctly at your local community waste collection/recycling centre.
Please, help us to conserve the environment we live in!
GB
PKFY-P·VKM-E PLFY-P·VCM-E3 PCFY-P·VKM-E
Fan speed 2 speed 3 speed 4 speed + Auto*
Vane Steps 4 steps 4 steps 5 steps
Auto Swing
Louver Manual Manual
Filter Normal Long-life Long-life
Filter cleaning indication 100 hr 2,500 hr 2,500 hr
Filter
Air intake
Vane
Air outlet
* This operation is available only using the remote controller
that is able to set its Fan speed setting "Auto".
Air outlet
Louver
Vane
Air intake
Filter
(Inside of Air intake)
Emergency operation switch
Front grille
Filter
Air inlet
Air outlet
Louver Vane
GB
Function buttons
432 1
5
6
789 0
Fri
Room
Set temp.
Mode Temp. Fan
Cool Auto
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
1
Press to turn ON/OFF the indoor unit.
2
Press to save the setting.
3
Press to return to the previous screen.
4
Press to bring up the Main menu.
5
Operation settings will appear.
When the backlight is off, pressing any button turns the backlight on
and it will stay lit for a certain period of time depending on the screen.
When the backlight is off, pressing any button turns the backlight on
and does not perform its function. (except for the [ON/OFF] button)
6
This lamp lights up in green while the unit is in operation. It blinks while
the remote controller is starting up or when there is an error.
7
Main display: Press to change the operation mode.
Main menu: Press to move the cursor down.
8
Main display: Press to decrease temperature.
Main menu: Press to move the cursor up.
9
Main display: Press to increase temperature.
Main menu: Press to go to the previous page.
0
Main display: Press to change the fan speed.
Main menu: Press to go to the next page.
78907890
5
GB
The main display can be displayed in two different modes: “Full” and “Basic”. The factory setting is “Full”. To switch to the “Basic” mode, change the
setting on the Main display setting. (Refer to operation manual included with remote controller.)
1
Indoor unit operation mode appears here.
2
Preset temperature appears here.
3
Current time appears here.
4
Fan speed setting appears here.
5
Functions of the corresponding buttons appear here.
6
Appears when the ON/OFF operation is centrally controlled.
7
Appears when the operation mode is centrally controlled.
8
Appears when the preset temperature is centrally controlled.
9
Appears when the filter reset function is centrally controlled.
0
Indicates when filter needs maintenance.
1
Current room temperature appears here.
2
Appears when the buttons are locked.
<Full mode>
* All icons are displayed for explanation.
Fri
Mode Temp. Fan
Room
Cool Auto
Set temp.
<Basic mode>
Fri
Cool
Mode Temp. Fan
AutoSet temp.
2
1
5
6
7
8
90
1
3
9
4
)
!
2345 6 7 8 2
1
5
3
Appears when the On/Off timer, Night setback, or Auto-off timer
function is enabled.
appears when the timer is disabled by the centralized control
system.
4
Appears when the Weekly timer is enabled.
5
Appears while the units are operated in the energy-save mode. (Will
not appear on some models of indoor units)
6
Appears while the outdoor units are operated in the silent mode.
(This indication is not available for CITY MULTI models.)
7
Appears when the built-in thermistor on the remote controller is
activated to monitor the room temperature (1).
appears when the thermistor on the indoor unit is activated to
monitor the room temperature.
8
Indicates the vane setting.
9
Indicates the louver setting.
)
Indicates the ventilation setting.
!
Appears when the preset temperature range is restricted.
Most settings (except ON/OFF, mode, fan speed, temperature) can be made from the Menu screen.
(Refer to operation manual included with remote controller.)
4
3
GB
1. Remove the top cover, insert two AAA bat-
teries, and then install the top cover.
2. Press the Reset button.
1
2
3
When using the wireless remote controller, point it towards the receiver on the indoor unit.
If the remote controller is operated within approximately 2 minutes after power is supplied to
the indoor unit, the indoor unit may beep twice as the unit is performing the initial automatic
check.
The indoor unit beeps to confirm that the signal transmitted from the remote controller has
been received. Signals can be received up to approximately 7 meters in a direct line from the
indoor unit in an area 45° to the left and right of the unit. However, illumination such as fluores-
cent lights and strong light can affect the ability of the indoor unit to receive signals.
If the operation lamp near the receiver on the indoor unit is blinking, the unit needs to be in-
spected. Consult your dealer for service.
Handle the remote controller carefully! Do not drop the remote controller or subject it to strong
shocks. In addition, do not get the remote controller wet or leave it in a location with high hu-
midity.
To avoid misplacing the remote controller, install the holder included with the remote controller
on a wall and be sure to always place the remote controller in the holder after use.
Two AAA batteries
Insert the negative (–)
end of each battery first.
Install the batteries in
the correct directions
(+, –)!
Press the Reset button
with an object that has
a narrow end.
Top cover
* For explanation purposes, all of the items
that appear in the display are shown.
* All items are displayed when the Reset
button is pressed.
Transmission indicator
Timer indicator
Remote controller display
ON/OFF button
Set Temperature buttons
Fan Speed button (Changes fan speed)
Airflow button (Changes up/down airflow direction)
Mode button (Changes operation mode)
Check button
Test Run button
Transmission area
Operation areas
Timer Off button
Timer On button
Hour button
Minute button
Set Time button (Sets the time)
Louver button (Changes left/right airflow direction)
Reset button
7
GB
Press the [ON/OFF] button.
The ON/OFF lamp will light up in
green, and the operation will start.
Press the [ON/OFF] button again.
The ON/OFF lamp will come off,
and the operation will stop.
Remote controller setting
Operation mode Operation mode before the power was turned off
Preset temperature Preset temperature before the power was turned off
Fan speed Fan speed before the power was turned off
Operation mode Preset temperature range
Cool/Dry 19 ~ 30 ºC
Heat 17 ~ 28 ºC
Auto (Single set point) 19 ~ 28 ºC
Auto (Dual set points) [Cool] Preset temperature range for the Cool mode
[Heat] Preset temperature range for the Heat mode
Fan/Ventilation Not settable
Press the [F1] button to go through the op-
eration modes in the order of “Cool”, “Dry”,
“Fan”, “Auto”, and “Heat”. Select the desired
operation mode.
Cool Dry Fan
Auto Heat
Operation modes that are not available
to the connected outdoor unit models will
not appear on the display.
The mode icon will blink when other indoor units in the same refrigerant
system (connected to the same outdoor unit) are already operated in a
different mode. In this case, the rest of the unit in the same group can
only be operated in the same mode.
Cool
Room
28.5
AutoSet temp.
Mode Temp. Fan
Fri
28.5
Example display
(Centigrade in 0.5-degree increments)
F1 F2 F3 F4
Cool
Room
AutoSet temp.
Mode Temp. Fan
Fri
Press the [F2] button to decrease the preset temperature, and press the
[F3] button to increase.
-
ferent operation modes.
1-degree increments, or in Fahrenheit, depending on the indoor unit
model and the display mode setting on the remote controller.
According to a set temperature, cooling operation starts if the room
temperature is too hot and heating operation starts if the room
temperature is too cold.
During automatic operation, if the room temperature changes and
remains 1.5 °C or more above the set temperature for 3 minutes, the
air conditioner switches to cool mode. In the same way, if the room
temperature remains 1.5 °C or more below the set temperature for
3 minutes, the air conditioner switches to heat mode.
Cool mode 3 minutes (switches
from heating to cooling)
Set temperature +1.5°C
Set temperature
Set temperature -1.5°C
3 minutes (switches
from cooling to heating)
Because the room temperature is automatically adjusted in order to
maintain a fixed effective temperature, cooling operation is performed
a few degrees warmer and heating operation is performed a few
degrees cooler than the set room temperature once the temperature is
reached (automatic energy-saving operation).
Preset temperature
for cooling
Preset temperature
for heating
1 The current preset temperatures will appear. Press the [F2] or [F3]
button to display the Settings screen.
F1 F2 F3 F4
Cool
Room
AutoSet temp.
Mode Temp. Fan
Fri
GB
F1 F2 F3 F4
Cool
Room
AutoSet temp.
Mode Temp. Fan
Fri
Press the [F4] button to go through the fan speeds in the following order.
Auto
units.
Press the [MENU] button.
The Main menu will appear.
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Cursor
Press [F1] to move the cursor down.
Press [F2] to move the cursor up.
Automatic fan speed setting (For wireless remote controller)
It is necessary to set for wireless remote controller only when automatic
fan speed is not set at default setting.
It is not necessary to set for wired remote controller with automatic fan
speed at default setting.
1Press the SET button with something sharp at the end.
Operate when display of remote controller is off.
blinks and Model No. is lighted A.
2Press the AUTO STOP button.
blinks and setting No. is lighted B.
(Setting No.01: without automatic fan speed)
3Press the temp. buttons to set the setting No.02.
(Setting No.02: with automatic fan speed)
If you mistook the operation, press the ON/OFF button and operate
again from procedure 2.
4Press the SET button with something sharp at the end.
and Model No. are lighted for 3 seconds, then turned off.
ON/OFF TEMP
RESETSET CLOCK
MODEL SELECT
FAN
VANE
TEST RUN
AUTO STOP
AUTO START
h
min
LOUVER
MODE
CHECK
B
A
3
2
14
Preset temperature
for cooling
Preset temperature
for heating
2Press the [F1] or [F2] button to move the cursor to the desired
temperature setting (cooling or heating).
Press the [F3] button to decrease the selected temperature, and [F4]
to increase.
different operation modes.
Auto (dual set point) mode are also used by the Cool/Dry and Heat
modes.
set point) mode must meet the conditions below:
heating preset temperatures (varies with the models of indoor units
connected) is met.
* If preset temperatures are set in a way that does not meet the minimum
temperature difference requirement, both preset temperatures will
automatically be changed within the allowable setting ranges.
When the operation mode is set to the Auto (dual set point) mode, two
preset temperatures (one each for cooling and heating) can be set.
Depending on the room temperature, indoor unit will automatically
operate in either the Cool or Heat mode and keep the room temperature
within the preset range.
The graph below shows the operation pattern of indoor unit operated in
the Auto (dual set point) mode.
Operation pattern during Auto (dual set point) mode
HEAT COOL HEAT COOL
Preset temp.
(COOL)
Preset temp.
(HEAT)
Room
temperature
The room temperature
changes corresponding
to the change in the
outside temperature.
GB
F1 F2 F3 F4
Fri
Swing Off Off
LouverVent.Vane
Cool
Room
AutoSet temp.
Mode Temp. Fan
Fri
F1 F2 F3 F4
Fri
Low
Vent.
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Press the [F1] or [F2] button to go
through the vane setting options:
"Auto", "Step 1", "Step 2", "Step 3",
"Step 4", "Step 5" and "Swing".
Select the desired setting.
Auto
Auto
Swing
Step 1 Step 2
Step 4Step 3
Swing
Step 5
Select "Swing" to move the vanes
up and down automatically.
When set to "Step 1" through "Step
-
lected angle.
under the vane setting icon
This icon will appear when the
vane is set to "Step 2" to "Step 5"
and the fan operates at "Mid 1"
to "Low" speed during cooling or
dry operation (depends on the
model).
The icon will go off in an hour, and
the vane setting will automatically
change.
Press the [F3] button to go through
the ventilation setting options in the
order of "Off", "Low", and "High".
* Settable only when LOSSNAY
unit is connected.
Off Low High
Off Low High
-
door units may be interlocked
with certain models of ventilation
units.
Press the [RETURN] button to go
back to the Main menu.
Press [F3] to go to the previous
page.
Press [F4] to go to the next page.
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
page
F1 F2 F3 F4
OU silent mode
Mon Tue Wed Thu Fri Sat Sun
Start Stop Silent
-
Setting display:
day
Select the desired item, and press
the [SELECT] button.
The screen to set the selected item
will appear.
Press the [RETURN] button to exit
the Main menu and return to the
Main display.
F1 F2 F3 F4
Cool
Room
AutoSet temp.
Mode Temp. Fan
Fri
The message at left will appear if
the user selects a function not sup-
ported by the corresponding indoor
unit model.
F1 F2 F3 F4
Title
Not available
Unsupported function
Return:
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Select "Vane·Louver·Vent. (Loss-
nay)" from the Main menu (refer to
page 8), and press the [SELECT]
button.
If no buttons are touched for
10 minutes, the screen will
automatically return to the Main
display. Any settings that have not
been saved will be lost.
GB
Timer functions are different by each remote controller.
For details on how to operate the remote controller, refer to the appropriate operation manual included with each remote controller.
* The louver button cannot be used.
and adjust to the desired direction.
* Do not set to the inside direction when the unit is in
the cooling or drying mode because there is a risk of condensation
and water dripping.
For LOSSNAY combination
The following 2 patterns of operation is available.
B
A
E
C
D
When the batteries of the remote controller run out or the remote
controller malfunctions, the emergency operation can be done using the
emergency buttons on the grille.
ADEFROST/STAND BY lamp
BOperation lamp
CEmergency operation cooling switch
DEmergency operation heating switch
EReceiver
Starting operation
button Cfor more than 2
seconds.
button Dfor more than 2
seconds.
Bmeans the start of operation.
Details of EMERGENCY MODE are as shown below.
Operation mode COOL HEAT
Set temperature 24°C 24°C
Fan speed High High
Airflow direction Horizontal Downward 4 (5)
Stopping operation
button Cor the button Dfor more
than 2 seconds.
AB D C E
11
GB
Cool
Room
AutoSet temp.
Mode Temp. Fan
Fri
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Restriction
Energy saving
Night setback
Filter information
Error information
F1 F2 F3 F4
Main menu:
Filter information
Reset
Please clean the filter.
Press Reset button after
filter cleaning.
F1 F2 F3 F4
Filter information
Filter information
OK
Cancel
Reset filter sign?
Filter sign reset
Main menu:
Navigating through the screens
To go back to the Main menu................ [MENU] button
To return to the previous screen ........... [RETURN] button
will appear on the Main display
in the Full mode when it is time to
Select "Filter information" from the
Main menu (refer to page 8), and
press the [SELECT] button.
sign.
Refer to the indoor unit Instructions
Select "OK" with the [F4] button.
Cool
Room
AutoSet temp.
Mode Temp. Fan
Fri
If two or more indoor units are connected, filter cleaning timing for
each unit may be different, depending on the filter type.
The icon will appear when the filter on the main unit is due for
cleaning.
When the filter sign is reset, the cumulative operation time of all units
will be reset.
The icon is scheduled to appear after a certain duration of
operation, based on the premise that the indoor units are installed in a
space with ordinary air quality. Depending on the air quality, the filter
may require more frequent cleaning.
The cumulative time at which filter needs cleaning depends on the
model.
This indication is not available for wireless remote controller.
cleaner, tap the filters against a solid object to knock off dirt and dust.
care to rinse off any detergent thoroughly and allow the filters to dry
completely before putting them back into the unit.
When the is displayed on the
Main display in the Full mode, the
system is centrally controlled and
12
GB
1Pull the knob on the intake grille in the direction indicated by the
arrow and it should open.
2Open the intake grille.
3Release the knob on the center edge of the intake grille and pull
the filter forward to remove the filter.
AKnob
BGrille
CIntake grille
DFilter
B
A
D
C
detergent (such as dishwashing liquid or laundry detergent).
1Using both hands, pull both the bottom corners of the inlet grille to
open the grille, then lift the filter until it clicks at the stop position.
2Hold the knobs on the filter and pull the filter up, then pull it out
downward.
(Located in two places, on the left and right.)
AFront grille
BFilter
B
A
1Open the intake grille.
2Hold the knob on the filter then pull the filter up in the direction of
an arrow. To replace the filter after cleaning, be sure to insert the
filter far enough until it fits into the stopper.
AFilter BIntake Grille CKnob DStopper
A
B
C
D
GB
Having trouble? Here is the solution. (Unit is operating normally.)
Air conditioner does not heat or cool well. Clean the filter. (Airflow is reduced when the filter is dirty or clogged.)
Check the temperature adjustment and adjust the set temperature.
Make sure that there is plenty of space around the outdoor unit. Is the
indoor unit air inlet or outlet blocked?
Has a door or window been left open?
When heating operation starts, warm air does not blow from the indoor
unit soon. Warm air does not blow until the indoor unit has sufficiently warmed
up.
During heat mode, the air conditioner stops before the set room
temperature is reached. When the outdoor temperature is low and the humidity is high,
frost may form on the outdoor unit. If this occurs, the outdoor unit
performs a defrosting operation. Normal operation should begin after
approximately 10 minutes.
Airflow up/down direction changes during operation or airflow up/down
direction cannot be set. During cool mode, the vanes automatically move to the horizontal
(down) position after 1 hour when the down (horizontal) airflow up/
down direction is selected. This is to prevent water from forming and
dripping from the vanes.
During heat mode, the vanes automatically move to the horizontal
airflow up/down direction when the airflow temperature is low or
during defrosting mode.
When the airflow up/down direction is changed, the vanes always move
up and down past the set position before finally stopping at the position. When the airflow up/down direction is changed, the vanes move to the
set position after detecting the base position.
A flowing water sound or occasional hissing sound is heard. These sounds can be heard when refrigerant is flowing in the air
conditioner or when the refrigerant flow is changing.
A cracking or creaking sound is heard. These sounds can be heard when parts rub against each due to
expansion and contraction from temperature changes.
The room has an unpleasant odor. The indoor unit draws in air that contains gases produced from the
walls, carpeting, and furniture as well as odors trapped in clothing,
and then blows this air back into the room.
A white mist or vapor is emitted from the indoor unit. If the indoor temperature and the humidity are high, this condition may
occur when operation starts.
During defrosting mode, cool airflow may blow down and appear like a
mist.
Water or vapor is emitted from the outdoor unit. During cool mode, water may form and drip from the cool pipes and
joints.
During heat mode, water may form and drip from the heat exchanger.
During defrosting mode, water on the heat exchanger evaporates and
water vapor may be emitted.
The air conditioner does not operate even though the ON/OFF button
is pressed. The operation mode display on the remote controller
disappears.
Is the power switch of the indoor unit turned off? Turn on the power
switch.
“ ” appears in the remote controller display. During central control, “ ” appears in the remote controller display
and air conditioner operation cannot be started or stopped using the
remote controller.
When restarting the air conditioner soon after stopping it, it does not
operate even though the ON/OFF button is pressed. Wait approximately three minutes.
(Operation has stopped to protect the air conditioner.)
Air conditioner operates without the ON/OFF button being pressed. Is the on timer set?
Press the ON/OFF button to stop operation.
Is the air conditioner connected to a central remote controller?
Consult the concerned people who control the air conditioner.
Does “ ” appear in the remote controller display?
Consult the concerned people who control the air conditioner.
Has the auto recovery feature from power failures been set?
Press the ON/OFF button to stop operation.
Air conditioner stops without the ON/OFF button being pressed. Is the off timer set?
Press the ON/OFF button to restart operation.
Is the air conditioner connected to a central remote controller?
Consult the concerned people who control the air conditioner.
Does “ ” appear in the remote controller display?
Consult the concerned people who control the air conditioner.
Remote controller timer operation cannot be set. Are timer settings invalid?
If the timer can be set, or appears in the remote controller
display.
“PLEASE WAIT” appears in the remote controller display. The initial settings are being performed. Wait approximately 3
minutes.
An error code appears in the remote controller display. The protection devices have operated to protect the air conditioner.
Do not attempt to repair this equipment by yourself.
Turn off the power switch immediately and consult your dealer. Be
sure to provide the dealer with the model name and information that
appeared in the remote controller display.
Draining water or motor rotation sound is heard. When cooling operation stops, the drain pump operates and then
stops. Wait approximately 3 minutes.
GB
Having trouble? Here is the solution. (Unit is operating normally.)
Noise is louder than specifications. The indoor operation sound level is affected by the acoustics of the
particular room as shown in the following table and will be higher than
the noise specification, which was measured in an echo-free room.
High sound-
absorbing rooms
Normal rooms Low sound-
absorbing rooms
Location
examples
Broadcasting
studio, music
room, etc.
Reception room,
hotel lobby, etc.
Office, hotel
room
Noise levels 3 to 7 dB 6 to 10 dB 9 to 13 dB
Nothing appears in the wireless remote controller display, the display
is faint, or signals are not received by the indoor unit unless the remote
controller is close.
The batteries are low.
Replace the batteries and press the Reset button.
If nothing appears even after the batteries are replaced, make sure
that the batteries are installed in the correct directions (+, –).
The operation lamp near the receiver for the wireless remote controller
on the indoor unit is flashing. The self diagnosis function has operated to protect the air conditioner.
Do not attempt to repair this equipment by yourself.
Turn off the power switch immediately and consult your dealer. Be
sure to provide the dealer with the model name.
Warm air blows from the indoor unit intermittently when heat mode is off
or during fan mode. When another indoor unit is operating in heat mode, the control
valve opens and closes occasionally to maintain stability in the air
conditioning system. This operation will stop after a while.
* If this will cause an undesirable rise in the room temperature in
small rooms, etc., stop the operation of the indoor unit temporarily.
The range of working temperatures for both the indoor and outdoor units of the series Y, R2, Multi-S is as below.
15
GB
Model PKFY-P63VKM-E PKFY-P100VKM-E
Power source (Voltage/Frequency) <V/Hz> ~N/220-230-240/50, 220/60
Capacity (Cooling/Heating) <kW> 7.1/8.0 11.2/12.5
Dimension (Height) <mm> 365
Dimension (Width) <mm> 1170
Dimension (Depth) <mm> 295
Net weight <kg> 22
Fan Airflow volume (Low-High) <m3/min> 16-20 20-25
Noise level (Low-High) <dB> 39-43 41-49
Model
PLFY-P15VCM-E3 PLFY-P20VCM-E3 PLFY-P25VCM-E3 PLFY-P32VCM-E3 PLFY-P40VCM-E3
Power source (Voltage/Frequency) <V/Hz> ~N/220-230-240/50
Capacity (Cooling/Heating) <kW> 1.7/1.9 2.2/2.5 2.8/3.2 3.6/4.0 4.5/5.0
Dimension (Height) <mm> 208 (20)
Dimension (Width) <mm> 570 (650)
Dimension (Depth) <mm> 570 (650)
Net weight <kg> 15 (3) 16.5 (3)
Fan Airflow volume (Low-Middle-High) <m3/min> 8-8.5-9 8-9-10 8-9-11
Noise level (Low-Middle-High) <dB> 28-30-31 28-31-35 28-31-37 29-33-38 30-34-39
Model PCFY-P40VKM-E PCFY-P63VKM-E PCFY-P100VKM-E PCFY-P125VKM-E
Power source (Voltage/Frequency) <V/Hz> ~/N 220-230-240/50, 220/60
Capacity (Cooling/Heating) <kW> 4.5/5.0 7.1/8.0 11.2/12.5 14.0/16.0
Dimension (Height) <mm> 230
Dimension (Width) <mm> 960 1280 1600
Dimension (Depth) <mm> 680
Net weight <kg> 24 32 36 38
Fan Airflow volume (Low-Middle2-Middle1-High)
<m3/min> 10-11-12-13 14-15-16-18 21-24-26-28 21-24-27-31
Noise level (Low-Middle2-Middle1-High) <dB> 29-32-34-36 31-33-35-37 36-38-41-43 36-39-42-44
Note
* Operation temperature of indoor unit.
Cooling mode: 15°C WB - 24°C WB
Heating mode: 15°C DB - 27°C DB
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling: Indoor 27 °C DB/19 °C WB, Outdoor 35 °C DB
Heating: Indoor 20 °C DB, Outdoor 7 °C DB/6 °C WB
*2 This figure ( ) indicates panel’s.
129
RU
89:;<=>:
?:;@A;:98B8;8<>8B
X
:;:9B=>8C89=>>8D8A;E8;=A8<=FB=
8EGH=B:FI>8A;8JB=B:C:?:;@A;:98B8;8<>8B
X
;=H9:F:?:;@A;:98B8;8<>8BHF8<:>@8J:>I
C=<>@:C:9:>G==KL:GB:M>E:H8A=>8B
EGH=B:FI>8F:9B:NBO>B;PGO
X 8<=FB=C:98OB:88BC:BBCKL8;D=>
NF:B;8>=E<:>GFA8FJB:8B>:D8;=H;:Q:>:
A:;:9A89FKJ:>:OB:O:NF:B;8AB=>G
8B>CF=<>8BFC@Q:C8HO8<>8=A=>:CF=D
8>9:>;8C=CQ:GC8>9P8>:;:B8O8<:BA8C;:9BI
O:E:FIB9
R:A;==B:IH=F8>:C:;M>MC8H9M8C@A>@M
8BC:;BF9:OAS:;><>MC8H9M8C@A>@M8BC:;B
C8C;:OGNAF=B=PA;8BC>8OFJ=:C8HO8<>8
8E;=H8C=>:8>9:>=B=A;:;=L:>:;=E8B@A;E8;=
BFH=PGA;E8;=
IJ
B8;8<>8
R:A8FIHB:I8B;@OA;:9O:B=O9FG>=<=BG
>8A8B==NB8O8<:BA;C:BA8C;:<9:>KAFIB=
9B=>P8>>8D8A;=CF:>G
R:H=;@C=B:>:EF8;B:CM89>@:C@A>@:
8BC:;BGC>B;:>>:D8>=;<>8D8EF88C
R:A;8B;=B:AFIB9B=>P8>>8D8A;=CF:>GB=>IK
O8J:>>8E:>H>8OMOJ:O;=BC8;B:F:OB9
=A;:L=:BG9FB:FI>=GNAF=B=PGA;E8;=CF8CGM
C@88CF=<>8B>=A;O:;CA8O:L:>8B;@B@O
8>8OF9C:;IKFA;E8;9FB:FI>8:C;:OG;=E8B=:B
C;:<O:8MF=<9:>GCA8O:L:>C@88CF=<>8BIK
B8D8C8OO:;J:MP:FGM8>8O8<:BA8FIH8C=BIG
>:A:P=FB=O
R:8EM89O8>=EFK9=BIH=O=F:>IO9:BIOB:OJB8E@
8>>:D;=F8>9P8>:;8OC8H9M=
B8BA;E8;>:A;:9>=H>=J:>9FGA8FIH8C=>G:D89:BIO
>C=F9=O=B=<:FP=O>:98B=B8J>@O8A@B8O
C=FS=P:98B:MA8;A8=8>>:A;89B8EJ:>:
>:A8FJ=BA8F>@>B;B=<A8A;=CF=OE:H8A=>8
NAF=B=P9=>>8D8A;E8;=FP=8BC:BBC:>>8D8H=M
E:H8A=>8BI
=>>@OB;8BC8OO8DBA8FIH8C=BIG9:BB=;Q:
F:BFP=8D;=>J:>>@OSHJ:O:>8;>@OF
OBC:>>@OC8HO8<>8BGOF>:98B=B8J>@O8A@B8O
FH>=>GOA89>=EFK9:>:O8BC:BBC:>>8D8FP=F
A8F:8EJ:>GA8FIH8C=>KB;8BC8O;=HTG>:>:O
A;=CFE:H8A=>8BA;F8CA8>O=>GC8HO8<>@M
8A=>8B:A;:D8A;O:>:>R:A8HC8FGB:9:BGOD;=BI
9=>>@OB;8BC8OJB=B:M>J:8:8EF<C=>:
B;8BC=>:98F<>@8L:BCFGBIG9:BIOE:H
88BC:BBCKL:D88>B;8FG
;O8>B=<:FA:;:O:L:>=B=<:A;8EF<C=>
8>9P8>:;=A8FIHB:B8FI8=H=>>@MF=9=D:>B
9FGH=A8F>:>GB;E8A;8C898CMF=9=D:>B=R:
O:QC=B::D8>=O9;DOMF=9=D:>B8O>:
98A=B:>=FJGC8H9M=CB;E8A;8C89=M
R=FJ:C8H9M=CB;E8A;8C89=MO8<:BC@H@C=BI=J
9=CF:>GC;:HFIB=B:8B8;@MO8<:BA;8H8BCH;@CF
9;D:A8C;:<9:>GA8FIH8C=>:FKE8D8MF=9=D:>B=
8BFJ>8D88B=H=>>8D89FGNB8B:O@C@H8C:B
O:M=>J:8:A8C;:<9:>:E8C;=E8B:B:O@F
C@M89B;8BC=HB;8G>=M9Q:OFJ=:NB8O8<:B
A8F<BI:;I:H>8A;:D;=988E:A:J:>KE:H8A=>8
;=E8B@NB8D8H9:FG
;:9A;:<9:>:
=A;:L=:BGE:8>B;8FI>@>:=>P8>;8C=>>@98BA
A8B8;8>>MFPA;E8;=ONB8D8F==
=>>@A;E8;>:98F<:>B=>=CFC=BIGA8FIH8C=B:F:O
E;=BB:IA8B=CLFCA:P=FH;8C=>>8:
A;:9A;GB:H==<B:B=>8CA;E8;=;
>:A;=CFI>8B=>8C:O8<:BA;8H8BB:J=C89@
NF:B;J:Q8FA8<=;
R8D9=>:H=>O=B:I;:O8>B8OFA:;:>88OA;E8;=>:
B8>8O:B8=O8B8GB:FI>8
R:B=CIB:=:FE8A8B8;8>>:A;:9O:B@>=A;E8;
R:A;8FC=B:>=A;E8;C89>:98B;=DC=B:I98
A;E8;=O8;@O;=O
R:;=HE;@HDC=B:CEFH8BA;E8;=D8;KJD=H
R:>O=B:A:;:9>KKA=>:FIFH=LBC:>BFGB8;=
C>:Q>:D8A;E8;=8D9=8>;=E8B=:B
R8D9=>:H=>O=B:I;:O8>B8OFA:;:>88OA;E8;=>:
B8>8O:B8=O8B8GB:FI>8
FC@H=O:BB:>:>8;O=FI>8FI>@QOFCE;=PK
8B=>8CB:A;E8;8BFKJB:DF=C>@C@FKJ=B:FIAB=>G
CG<B:IC=QOA8B=CL8O
R8D9=>:CB=CFGB:A=FIP@A=FB9C8BC:;BG
CM89=FC@M89=
FC@A8JCBC:B:B;=>>@:H=A=M8B=>8CB:
A;E8;8BFKJB:AB=>:A;88>FIB;B:IC=QO
A8B=CL8OA;8BC>8OFJ=:O8<:BA;8H8BA8F8O=
A;E8;=A8<=;FNF:B;8Q8
:BGO>:O8L>@OFK9GOU=O8B8GB:FI>8
A8FIH8C=BIG9=>>@O8>9P8>:;8OC8H9M=
FA;8M89BC@E;8FB:J=D=H=MF=9=D:>B=
8B=>8CB:;=E8B8>9P8>:;=BL=B:FI>8A;8C:B;B:
A8O:L:>:CG<B:IC=QOA8B=CL8O
=>>8:H9:F:A;:9>=H>=J:>89FGNAF=B=P
A:P=FB=OFA:P=FI>88EJ:>>@OA8FIH8C=B:FGO
CO=D=H>=MCF:D8A;8O@QF:>>8B>=S:;O=M;8O:
OC8F=A8FIH:O=GCB:B:
;:9A;:<9:>:
A@C=:BO:;@A;:98B8;8<>8B8B8;@:F:9:B
C@A8F>GBIJB8E@HE:<=BIB;=CO@FDE:FA8FIH8C=B:FG
B8;8<>8
A@C=:BO:;@A;:98B8;8<>8B8B8;@:F:9:B
C@A8F>GBIJB8E@>:A8C;:9BIA;E8;
OC8F@=H=>>@:>=FFKB;=PGM
KL
ML129
NO130
P134
QO137
R
OL137
KS138
T140
QSS142
;O:J=>:
NB8O;8C89BC:A8A8FIH8C=>K=AA=;=B=S;=H=A;8C89>8AFIB9B=>P8>>8D8A;=CF:>G8B>8BGAFIB
9B=>P8>>8D8A;=CF:>G
C:9:>G89;DMAFIB=M9B=>P8>>8D8A;=CF:>GA;C89GBGC;8C89BC:>=M89GL:OGCNB88;8E:
RU
R=O:>8C=>:9:B=F:
?8>B=<>=B:>:
>B;:>>A;E8;
PKFY-P·VKM-E % PCFY-P·VKM-E
U U U U
&V
W XL
YSLOYSLOYSLO
V
Z [ [
\ ]OO
O
TY
XJ
\
[S
[S
J
Z
W
XOO
M898C=GA8B8F8J>=G=:B=
\
[
S
W
[S
J
[SJ
X
[SJ
Z
W
\
[S
L
OV
RU
\
432 1
5
6
789 0
R=O:>8C=>:9:B=F:
;8C89>8AFIB9B=>P8>>8D8A;=CF:>G
V>PS>P8>=FI>@M>8A8O:>GKBGCH=CO8B 8B
N;=>=OA89=HA8S>PGO>8A88B8;=G8B8E;=<=
:BGC><>:J=BWN;=>=9FGS>P8B8;@:;=E8B=KB
C9=>>8O8>:
;P:>B;=FH8C=>>8OA;=CF:>B:O8A89=H=A8S>
PGO9FGH=EF8;8C=>>@M>8A88B8E;=<=BIG>:E9:B
1>8A=X
NLO
2>8A=XY
NLSO
3>8A=
NL
4>8A=?RZ
NL
589C:B=WN;=>=
^L
IL
ILO
Y
[IW[_IW
6>9=B8;X
TO
ST
J
7V>P8>=FI>=G>8A=
`LL
`L
8V>P8>=FI>=G>8A=
`LJ
`LS
9V>P8>=FI>=G>8A=
`L
`LSO
0V>P8>=FI>=G>8A=
`L
`LSO
>B:;S:8>B;8FF:;=
Fri
Room
Set temp.
Mode Temp. Fan
Cool Auto
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
78907890
[F=C>8:8>8 [F=C>8:O:>K
89=H=A8S>PGO
RU
R=O:>8C=>:9:B=F:
`LLSSLSO^OaOOOO
LLb^OLOU
S
1:<O;=E8B@
aLL
2=9=>>=GB:OA:;=B;=
aL
3\=@O;8C89BC8A8B=>8C:
aL
48;8BIC:>BFGB8;=
aLO
589=H=A8S>PGO>8A8
aLYS
6
]L
7
]LL
8
]LO
O
9
]LYO
Y
0
]LSLY
1
8O>=B>=GB:OA:;=B;=O;8C89BC8A8B=>8C:
aL
2
]L
.XOLL/
[
.^OLL/
3
]LYQO[IW[_IW
NOLVO
OO
O
4
]LO
5
]LLL
SSS
6
]LLOSL
PS%
7
]LO
OO1
L
OO
8
]LO
9
]LOL
)
]LO
!
]LS
^J[IW[_IWLL
US
>9=PG
4
3
Fri
Mode Temp. Fan
Room
Cool Auto
Set temp.
Fri
Cool
Mode Temp. Fan
AutoSet temp.
2
1
5
6
7
8
90
1
3
9
4
)
!
2345 6 7 8 2
1
5
RU
1
2
3
9FGE:A;8C89>8D8AFIB=9B=>P8>>8D8A;=CF:>G;=H9:F8A8F>B:FI>8:8E8;98C=>:
R=O:>8C=>:9:B=F:
;O:J=>:B8FI89FGE:A;8C89>8D8AFIB=9B=>P8>>8D8A;=CF:>G
X
c
OO
LS
[OOOL
U
O
0]O
JYY
c
SUL
L
]OL$NO
OI
OSOL
[LL
LSO
O
L
B=>8C=H=O:>=E=B=;::
USJ
OS
J
NLU
[S
J O
UO
O2
LO
O
KO
O
&2$
NL
U
[Sd-
[LL
U
T
TO
O
I[IW[_IW
I
I
T
IJT
JS
ILTL
I
I
]
]
IO
IO
I
I
Ia
ILT
J
IU
This manual suits for next models
10
Table of contents
Other Mitsubishi Electric Air Conditioner manuals
Mitsubishi Electric
Mitsubishi Electric Mr. SLim SEZ-KD09NA Operating manual
Mitsubishi Electric
Mitsubishi Electric MUZ-BT20VG User manual
Mitsubishi Electric
Mitsubishi Electric MSX-05NV2-E2 User manual
Mitsubishi Electric
Mitsubishi Electric MSZ-FS09NA User manual
Mitsubishi Electric
Mitsubishi Electric CITY MULTI PEFY-P36NMHU-E-OA User manual
Mitsubishi Electric
Mitsubishi Electric PEA-RP200 GA User manual
Mitsubishi Electric
Mitsubishi Electric MSC-GE20VB User manual
Mitsubishi Electric
Mitsubishi Electric MFZ-KA-VA Instruction manual
Mitsubishi Electric
Mitsubishi Electric MUZ-AP35VG User manual
Mitsubishi Electric
Mitsubishi Electric PUHZ-P HA Series User manual
Mitsubishi Electric
Mitsubishi Electric Mr.Slim SUZ-KA71VA User manual
Mitsubishi Electric
Mitsubishi Electric Mr. Slim PEA-M200LA2 User manual
Mitsubishi Electric
Mitsubishi Electric MS-CP18VA User manual
Mitsubishi Electric
Mitsubishi Electric MSZ-GA50VA User manual
Mitsubishi Electric
Mitsubishi Electric PURY-P-YGM-A User manual
Mitsubishi Electric
Mitsubishi Electric MSH-GE50VB-E1 User manual
Mitsubishi Electric
Mitsubishi Electric MSZ-WR09NA User manual
Mitsubishi Electric
Mitsubishi Electric MSZ-BT20VG User manual
Mitsubishi Electric
Mitsubishi Electric MLZ-KA25VA User manual
Mitsubishi Electric
Mitsubishi Electric Mr.Slim MSY-D30NA User manual
