Mitsubishi Electric PUHY-RP-Y(S)JM-B Product guide

DATA BOOK
AIR CONDITIONERS
MODEL
PUHY-RP-Y(S)JM-B
PURY-RP-YJM-B
MEE10K014cover.inddi 2011/02/0915:46:34

REPLACE MULTI
1.OUTDOOR UNIT
Y SERIES ................................................................................................................. 1
R2 SERIES............................................................................................................. 61
2.CAPACITY TABLES (Indoor unit)............................................................ 87
3.SYSTEM DESIGN
Y SERIES ............................................................................................................. 189
R2 SERIES........................................................................................................... 241
4.CONTROLLER ................................................................................................. 285

1
Y SERIES
OUTDOOR UNITS
OUTDOOR UNITS
I.Y SERIES
1. SPECIFICATIONS........................................................................................................................................... 2
2. EXTERNAL DIMENSIONS .............................................................................................................................. 15
3. CENTER OF GRAVITY ................................................................................................................................... 19
4. ELECTRICAL WIRING DIAGRAMS ................................................................................................................ 20
5. SOUND LEVELS ............................................................................................................................................. 21
6. CAPACITY TABLES ........................................................................................................................................ 25
6-1. Correction by temperature ....................................................................................................................... 25
6-2. Correction by total indoor......................................................................................................................... 39
6-3. Correction by refrigerant piping length..................................................................................................... 43
6-4. Correction at frost and defrost ................................................................................................................. 46
6-5. Operation temperature range .................................................................................................................. 47
7. OPTIONAL PARTS.......................................................................................................................................... 48
7-1. OUTDOOR TWINNING KIT..................................................................................................................... 48
8. UNIT SELECTION ........................................................................................................................................... 49
8-1. Indoor and outdoor unit selection ............................................................................................................ 49
8-2. Calculation samples................................................................................................................................. 51
8-3. Pipe diameter correction factor ................................................................................................................ 54

1. SPECIFICATIONS
OUTDOOR UNITS 2
I.Y SERIES1. SPECIFICATIONS
Model PUHY-RP200YJM-B(-BS) PUHY-RP250YJM-B(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 22.4 28.0
(Nominal) *1 kcal / h 19,300 24,100
*1 BTU / h 76,400 95,500
Power input kW 5.68 7.62
Current input A 9.5-9.1-8.7 12.8-12.2-11.7
COP kW / kW 3.94 3.67
Temp. range of Indoor W.B. 15.0~24.0°C(59~75°F) 15.0~24.0°C(59~75°F)
cooling Outdoor D.B. -5.0~43.0°C(23~109°F) -5.0~43.0°C(23~109°F)
Heating capacity *2 kW 25.0 31.5
(Nominal) *2 kcal / h 21,500 27,100
*2 BTU / h 85,300 107,500
Power input kW 5.69 7.22
Current input A 9.6-9.1-8.7 12.1-11.5-11.1
COP kW / kW 4.39 4.36
Temp. range of Indoor D.B. 15.0~27.0°C(59~81°F) 15.0~27.0°C(59~81°F)
heating Outdoor W.B. -20.0~15.5°C(-4~60°F) -20.0~15.5°C(-4~60°F)
Indoor unit Total capacity 50~130 % of outdoor unit capacity 50~130 % of outdoor unit capacity
connectable Model / Quantity P15~P250 / 1~17 P15~P250 / 1~21
Sound pressure level (measured in anechoic room) dB <A> 56 57
Refrigerant Liquid pipe mm (in.) 12.7(1/2) Brazed 12.7(1/2) Brazed
piping diameter Gas pipe mm (in.) 28.58(1-1/8) Brazed 28.58(1-1/8) Brazed
FAN Type x Quantity Propeller fan x 1 Propeller fan x 1
Air flow rate m3/ min 185 185
L/s 3,083 3,083
cfm 6,532 6,532
Control, Driving mechanism Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1 0.92 x 1
*3 External static press. 0 Pa (0 mmH2O) 0 Pa (0 mmH2O)
Compressor Type x Quantity Inverter scroll hermetic compressor Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter Inverter
Motor output kW 4.8 6.8
Case heater kW 0.035(240 V) 0.045(240 V)
Lubricant MEL32 MEL32
External finish Pre-coated galvanized steel sheets (+powder coating for -BS
type)
Pre-coated galvanized steel sheets (+powder coating for -BS
type)
<MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar>
External dimension HxWxD mm 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760
in. 67-3/8(65 without legs) x 36-1/4 x 29-15/16 67-3/8(65 without legs) x 36-1/4 x 29-15/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
Inverter circuit (COMP. / FAN) Over-heat protection, Over-current protection Over-heat protection, Over-current protection
Compressor Over-heat protection Over-heat protection
Fan motor Thermal switch Thermal switch
Refrigerant Type x original charge R410A x 6.5kg (15lbs) R410A x 9.0kg (20lbs)
Control LEV and HIC circuit LEV and HIC circuit
Net weight kg (lbs) 230(508) 255(563)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure
Defrosting method Auto-defrost mode (Reversed refrigerant cycle) Auto-defrost mode (Reversed refrigerant cycle)
Drawing External KD94G725 KD94G725
Wiring KE94C490 KE94C490
Standard attachment Document Installation Manual Installation Manual
Accessory Refrigerant conn. pipe Refrigerant conn. pipe
Optional parts
Header: CMY-Y104/108/1010-G Header: CMY-Y104/108/1010-G
Remarks ●.Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be re-
ferred to the Installation Manual.
●.Due to continuing improvement, above specifications may be subject to change without notice.
●.Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Notes : Unit converter
1.Nominal cooling conditions (subject to JIS B8615-1)
Indoor: 27°CDB/19°CWB (81°FDB/66°FWB), Outdoor: 35°CDB (95°FDB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-1)
Indoor: 20°CDB (68°FDB), Outdoor: 7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.External static pressure option is available (30 Pa, 60 Pa/3.1 mmH2O, 6.1 mmH2O).
kcal =kW x 860
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg / 0.4536
*The specification data is
subject to rounding variation.

3
1. SPECIFICATIONS
OUTDOOR UNITS
Model PUHY-RP300YJM-B(-BS) PUHY-RP350YJM-B(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 33.5 40.0
(Nominal) *1 kcal / h 28,800 34,400
*1 BTU / h 114,300 136,500
Power input kW 8.98 11.79
Current input A 15.1-14.4-13.8 19.9-18.9-18.2
COP kW / kW 3.73 3.39
Temp. range of Indoor W.B. 15.0~24.0°C(59~75°F) 15.0~24.0°C(59~75°F)
cooling Outdoor D.B. -5.0~43.0°C(23~109°F) -5.0~43.0°C(23~109°F)
Heating capacity *2 kW 37.5 45.0
(Nominal) *2 kcal / h 32,300 38,700
*2 BTU / h 128,000 153,500
Power input kW 9.42 12.60
Current input A 15.9-15.1-14.5 21.2-20.2-19.4
COP kW / kW 3.98 3.57
Temp. range of Indoor D.B. 15.0~27.0°C(59~81°F) 15.0~27.0°C(59~81°F)
heating Outdoor W.B. -20.0~15.5°C(-4~60°F) -20.0~15.5°C(-4~60°F)
Indoor unit Total capacity 50~130 % of outdoor unit capacity 50~130 % of outdoor unit capacity
connectable Model / Quantity P15~P250 / 1~26 P15~P250 / 1~30
Sound pressure level (measured in anechoic room) dB <A> 59 60
Refrigerant Liquid pipe mm (in.) 12.7(1/2) Brazed 15.88(5/8) Brazed
piping diameter Gas pipe mm (in.) 28.58(1-1/8) Brazed 34.93(1-3/8) Brazed
FAN Type x Quantity Propeller fan x 1 Propeller fan x 1
Air flow rate m3/ min 185 185
L/s 3,083 3,083
cfm 6,532 6,532
Control, Driving mechanism Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1 0.92 x 1
*3 External static press. 0 Pa (0 mmH2O) 0 Pa (0 mmH2O)
Compressor Type x Quantity Inverter scroll hermetic compressor Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter Inverter
Motor output kW 8.2 9.9
Case heater kW 0.045(240 V) 0.045(240 V)
Lubricant MEL32 MEL32
External finish Pre-coated galvanized steel sheets (+powder coating for -BS
type)
Pre-coated galvanized steel sheets (+powder coating for -BS
type)
<MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar>
External dimension HxWxD mm 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760
in. 67-3/8(65 without legs) x 36-1/4 x 29-15/16 67-3/8(65 without legs) x 36-1/4 x 29-15/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
Inverter circuit (COMP. / FAN) Over-heat protection, Over-current protection Over-heat protection, Over-current protection
Compressor Over-heat protection Over-heat protection
Fan motor Thermal switch Thermal switch
Refrigerant Type x original charge R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs)
Control LEV and HIC circuit LEV and HIC circuit
Net weight kg (lbs) 255(563) 255(563)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure
Defrosting method Auto-defrost mode (Reversed refrigerant cycle) Auto-defrost mode (Reversed refrigerant cycle)
Drawing External KD94G725 KD94G725
Wiring KE94C490 KE94C490
Standard attachment Document Installation Manual Installation Manual
Accessory Refrigerant conn. pipe Refrigerant conn. pipe
Optional parts
Header: CMY-Y104/108/1010-G Header: CMY-Y104/108/1010-G
Remarks ●.Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be re-
ferred to the Installation Manual.
●.Due to continuing improvement, above specifications may be subject to change without notice.
●.Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Notes : Unit converter
1.Nominal cooling conditions (subject to JIS B8615-1)
Indoor: 27°CDB/19°CWB (81°FDB/66°FWB), Outdoor: 35°CDB (95°FDB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-1)
Indoor: 20°CDB (68°FDB), Outdoor: 7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.External static pressure option is available (30 Pa, 60 Pa/3.1 mmH2O, 6.1 mmH2O).
kcal =kW x 860
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg / 0.4536
*The specification data is
subject to rounding variation.

1. SPECIFICATIONS
OUTDOOR UNITS 4
Model PUHY-RP400YSJM-B(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 45.0
(Nominal) *1 kcal / h 38,700
*1 BTU / h 153,500
Power input kW 11.87
Current input A 20.0-19.0-18.3
COP kW / kW 3.79
Temp. range of Indoor W.B. 15.0~24.0°C(59~75°F)
cooling Outdoor D.B. -5.0~43.0°C(23~109°F)
Heating capacity *2 kW 50.0
(Nominal) *2 kcal / h 43,000
*2 BTU / h 170,600
Power input kW 11.38
Current input A 19.2-18.2-17.5
COP kW / kW 4.39
Temp. range of Indoor D.B. 15.0~27.0°C(59~81°F)
heating Outdoor W.B. -20.0~15.5°C(-4~60°F)
Indoor unit Total capacity 50~130 % of outdoor unit capacity
connectable Model / Quantity P15~P250 / 1~32
Sound pressure level (measured in anechoic room) dB <A> 59
Refrigerant Liquid pipe mm (in.) 15.88(5/8) Brazed
piping diameter Gas pipe mm (in.) 34.93(1-3/8) Brazed
Set Model
Model PUHY-RP200YJM-B(-BS) PUHY-RP200YJM-B(-BS)
FAN Type x Quantity Propeller fan x 1 Propeller fan x 1
Air flow rate m3/ min 185 185
L/s 3,083 3,083
cfm 6,532 6,532
Control , Driving mechanism Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1 0.92 x 1
*3 External static press. 0 Pa (0 mmH2O) 0 Pa (0 mmH2O)
Compressor Type x Quantity Inverter scroll hermetic compressor Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter Inverter
Motor output kW 4.8 4.8
Case heater kW 0.035(240 V) 0.035(240 V)
Lubricant MEL32 MEL32
External finish Pre-coated galvanized steel sheets (+powder coating for -BS
type)
Pre-coated galvanized steel sheets (+powder coating for -BS
type)
<MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar>
External dimension HxWxD mm 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760
in. 67-3/8(65 without legs) x 36-1/4 x 29-15/16 67-3/8(65 without legs) x 36-1/4 x 29-15/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
Inverter circuit (COMP. / FAN) Over-heat protection, Over-current protection Over-heat protection, Over-current protection
Compressor Over-heat protection Over-heat protection
Fan motor Thermal switch Thermal switch
Refrigerant Type x original charge R410A x 6.5kg (15lbs) R410A x 6.5kg (15lbs)
Control LEV and HIC circuit
Net weight kg (lbs) 230(508) 230(508)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure
Pipe between unit and Liquid pipe mm (in.) 9.52(3/8) Brazed 9.52(3/8) Brazed
distributor Gas pipe mm (in.) 19.05(3/4) Brazed 19.05(3/4) Brazed
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External KD94G726
Wiring KE94C490 KE94C490
Standard attachment Document Installation Manual
Accessory Refrigerant conn. pipe
Optional parts Outdoor Twinning kit: CMY-RP100VBK
Header: CMY-Y104/108/1010-G
Remarks ●.Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be re-
ferred to the Installation Manual.
●.Due to continuing improvement, above specifications may be subject to change without notice.
●.Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Notes : Unit converter
1.Nominal cooling conditions (subject to JIS B8615-1)
Indoor: 27°CDB/19°CWB (81°FDB/66°FWB), Outdoor: 35°CDB (95°FDB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-1)
Indoor: 20°CDB (68°FDB), Outdoor: 7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.External static pressure option is available (30 Pa, 60 Pa/3.1 mmH2O, 6.1 mmH2O).
kcal =kW x 860
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg / 0.4536
*The specification data is
subject to rounding variation.

5
1. SPECIFICATIONS
OUTDOOR UNITS
Model PUHY-RP450YSJM-B(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 50.0
(Nominal) *1 kcal / h 43,000
*1 BTU / h 170,600
Power input kW 13.77
Current input A 23.2-22.0-21.2
COP kW / kW 3.63
Temp. range of Indoor W.B. 15.0~24.0°C(59~75°F)
cooling Outdoor D.B. -5.0~43.0°C(23~109°F)
Heating capacity *2 kW 56.0
(Nominal) *2 kcal / h 48,200
*2 BTU / h 191,100
Power input kW 12.81
Current input A 21.6-20.5-19.8
COP kW / kW 4.37
Temp. range of Indoor D.B. 15.0~27.0°C(59~81°F)
heating Outdoor W.B. -20.0~15.5°C(-4~60°F)
Indoor unit Total capacity 50~130 % of outdoor unit capacity
connectable Model / Quantity P15~P250 / 1~32
Sound pressure level (measured in anechoic room) dB <A> 59.5
Refrigerant Liquid pipe mm (in.) 15.88(5/8) Brazed
piping diameter Gas pipe mm (in.) 34.93(1-3/8) Brazed
Set Model
Model PUHY-RP200YJM-B(-BS) PUHY-RP250YJM-B(-BS)
FAN Type x Quantity Propeller fan x 1 Propeller fan x 1
Air flow rate m3/ min 185 185
L/s 3,083 3,083
cfm 6,532 6,532
Control , Driving mechanism Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1 0.92 x 1
*3 External static press. 0 Pa (0 mmH2O) 0 Pa (0 mmH2O)
Compressor Type x Quantity Inverter scroll hermetic compressor Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter Inverter
Motor output kW 4.8 6.8
Case heater kW 0.035(240 V) 0.045(240 V)
Lubricant MEL32 MEL32
External finish Pre-coated galvanized steel sheets (+powder coating for -BS
type)
Pre-coated galvanized steel sheets (+powder coating for -BS
type)
<MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar>
External dimension HxWxD mm 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760
in. 67-3/8(65 without legs) x 36-1/4 x 29-15/16 67-3/8(65 without legs) x 36-1/4 x 29-15/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
Inverter circuit (COMP. / FAN) Over-heat protection, Over-current protection Over-heat protection, Over-current protection
Compressor Over-heat protection Over-heat protection
Fan motor Thermal switch Thermal switch
Refrigerant Type x original charge R410A x 6.5kg (15lbs) R410A x 9.0kg (20lbs)
Control LEV and HIC circuit
Net weight kg (lbs) 230(508) 255(563)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure
Pipe between unit and Liquid pipe mm (in.) 9.52(3/8) Brazed 9.52(3/8) Brazed
distributor Gas pipe mm (in.) 19.05(3/4) Brazed 22.2(7/8) Brazed
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External KD94G726
Wiring KE94C490 KE94C490
Standard attachment Document Installation Manual
Accessory Refrigerant conn. pipe
Optional parts Outdoor Twinning kit: CMY-RP100VBK
Header: CMY-Y104/108/1010-G
Remarks ●.Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be re-
ferred to the Installation Manual.
●.Due to continuing improvement, above specifications may be subject to change without notice.
●.Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Notes : Unit converter
1.Nominal cooling conditions (subject to JIS B8615-1)
Indoor: 27°CDB/19°CWB (81°FDB/66°FWB), Outdoor: 35°CDB (95°FDB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-1)
Indoor: 20°CDB (68°FDB), Outdoor: 7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.External static pressure option is available (30 Pa, 60 Pa/3.1 mmH2O, 6.1 mmH2O).
kcal =kW x 860
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg / 0.4536
*The specification data is
subject to rounding variation.

1. SPECIFICATIONS
OUTDOOR UNITS 6
Model PUHY-RP500YSJM-B(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 56.0
(Nominal) *1 kcal / h 48,200
*1 BTU / h 191,100
Power input kW 15.68
Current input A 26.4-25.1-24.2
COP kW / kW 3.57
Temp. range of Indoor W.B. 15.0~24.0°C(59~75°F)
cooling Outdoor D.B. -5.0~43.0°C(23~109°F)
Heating capacity *2 kW 63.0
(Nominal) *2 kcal / h 54,200
*2 BTU / h 215,000
Power input kW 14.44
Current input A 24.3-23.1-22.3
COP kW / kW 4.36
Temp. range of Indoor D.B. 15.0~27.0°C(59~81°F)
heating Outdoor W.B. -20.0~15.5°C(-4~60°F)
Indoor unit Total capacity 50~130 % of outdoor unit capacity
connectable Model / Quantity P15~P250 / 1~32
Sound pressure level (measured in anechoic room) dB <A> 60
Refrigerant Liquid pipe mm (in.) 15.88(5/8) Brazed
piping diameter Gas pipe mm (in.) 34.93(1-3/8) Brazed
Set Model
Model PUHY-RP250YJM-B(-BS) PUHY-RP250YJM-B(-BS)
FAN Type x Quantity Propeller fan x 1 Propeller fan x 1
Air flow rate m3/ min 185 185
L/s 3,083 3,083
cfm 6,532 6,532
Control , Driving mechanism Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1 0.92 x 1
*3 External static press. 0 Pa (0 mmH2O) 0 Pa (0 mmH2O)
Compressor Type x Quantity Inverter scroll hermetic compressor Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter Inverter
Motor output kW 6.8 6.8
Case heater kW 0.045(240 V) 0.045(240 V)
Lubricant MEL32 MEL32
External finish Pre-coated galvanized steel sheets (+powder coating for -BS
type)
Pre-coated galvanized steel sheets (+powder coating for -BS
type)
<MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar>
External dimension HxWxD mm 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760
in. 67-3/8(65 without legs) x 36-1/4 x 29-15/16 67-3/8(65 without legs) x 36-1/4 x 29-15/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
Inverter circuit (COMP. / FAN) Over-heat protection, Over-current protection Over-heat protection, Over-current protection
Compressor Over-heat protection Over-heat protection
Fan motor Thermal switch Thermal switch
Refrigerant Type x original charge R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs)
Control LEV and HIC circuit
Net weight kg (lbs) 255(563) 255(563)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure
Pipe between unit and Liquid pipe mm (in.) 9.52(3/8) Brazed 9.52(3/8) Brazed
distributor Gas pipe mm (in.) 22.2(7/8) Brazed 22.2(7/8) Brazed
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External KD94G726
Wiring KE94C490 KE94C490
Standard attachment Document Installation Manual
Accessory Refrigerant conn. pipe
Optional parts Outdoor Twinning kit: CMY-RP100VBK
Header: CMY-Y104/108/1010-G
Remarks ●.Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be re-
ferred to the Installation Manual.
●.Due to continuing improvement, above specifications may be subject to change without notice.
●.Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Notes : Unit converter
1.Nominal cooling conditions (subject to JIS B8615-1)
Indoor: 27°CDB/19°CWB (81°FDB/66°FWB), Outdoor: 35°CDB (95°FDB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-1)
Indoor: 20°CDB (68°FDB), Outdoor: 7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.External static pressure option is available (30 Pa, 60 Pa/3.1 mmH2O, 6.1 mmH2O).
kcal =kW x 860
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg / 0.4536
*The specification data is
subject to rounding variation.

7
1. SPECIFICATIONS
OUTDOOR UNITS
Model PUHY-RP550YSJM-B(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 63.0
(Nominal) *1 kcal / h 54,200
*1 BTU / h 215,000
Power input kW 17.50
Current input A 29.5-28.0-27.0
COP kW / kW 3.60
Temp. range of Indoor W.B. 15.0~24.0°C(59~75°F)
cooling Outdoor D.B. -5.0~43.0°C(23~109°F)
Heating capacity *2 kW 69.0
(Nominal) *2 kcal / h 59,300
*2 BTU / h 235,400
Power input kW 16.62
Current input A 28.0-26.6-25.6
COP kW / kW 4.15
Temp. range of Indoor D.B. 15.0~27.0°C(59~81°F)
heating Outdoor W.B. -20.0~15.5°C(-4~60°F)
Indoor unit Total capacity 50~130 % of outdoor unit capacity
connectable Model / Quantity P15~P250 / 1~32
Sound pressure level (measured in anechoic room) dB <A> 61
Refrigerant Liquid pipe mm (in.) 15.88(5/8) Brazed
piping diameter Gas pipe mm (in.) 34.93(1-3/8) Brazed
Set Model
Model PUHY-RP250YJM-B(-BS) PUHY-RP300YJM-B(-BS)
FAN Type x Quantity Propeller fan x 1 Propeller fan x 1
Air flow rate m3/ min 185 185
L/s 3,083 3,083
cfm 6,532 6,532
Control , Driving mechanism Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1 0.92 x 1
*3 External static press. 0 Pa (0 mmH2O) 0 Pa (0 mmH2O)
Compressor Type x Quantity Inverter scroll hermetic compressor Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter Inverter
Motor output kW 6.8 8.2
Case heater kW 0.045(240 V) 0.045(240 V)
Lubricant MEL32 MEL32
External finish Pre-coated galvanized steel sheets (+powder coating for -BS
type)
Pre-coated galvanized steel sheets (+powder coating for -BS
type)
<MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar>
External dimension HxWxD mm 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760
in. 67-3/8(65 without legs) x 36-1/4 x 29-15/16 67-3/8(65 without legs) x 36-1/4 x 29-15/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
Inverter circuit (COMP. / FAN) Over-heat protection, Over-current protection Over-heat protection, Over-current protection
Compressor Over-heat protection Over-heat protection
Fan motor Thermal switch Thermal switch
Refrigerant Type x original charge R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs)
Control LEV and HIC circuit
Net weight kg (lbs) 255(563) 255(563)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure
Pipe between unit and Liquid pipe mm (in.) 9.52(3/8) Brazed 12.7(1/2) Brazed
distributor Gas pipe mm (in.) 22.2(7/8) Brazed 22.2(7/8) Brazed
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External KD94G726
Wiring KE94C490 KE94C490
Standard attachment Document Installation Manual
Accessory Refrigerant conn. pipe
Optional parts Outdoor Twinning kit: CMY-RP100VBK
Header: CMY-Y104/108/1010-G
Remarks ●.Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be re-
ferred to the Installation Manual.
●.Due to continuing improvement, above specifications may be subject to change without notice.
●.Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Notes : Unit converter
1.Nominal cooling conditions (subject to JIS B8615-1)
Indoor: 27°CDB/19°CWB (81°FDB/66°FWB), Outdoor: 35°CDB (95°FDB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-1)
Indoor: 20°CDB (68°FDB), Outdoor: 7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.External static pressure option is available (30 Pa, 60 Pa/3.1 mmH2O, 6.1 mmH2O).
kcal =kW x 860
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg / 0.4536
*The specification data is
subject to rounding variation.

1. SPECIFICATIONS
OUTDOOR UNITS 8
Model PUHY-RP600YSJM-B(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 69.0
(Nominal) *1 kcal / h 59,300
*1 BTU / h 235,400
Power input kW 18.59
Current input A 31.3-29.8-28.7
COP kW / kW 3.71
Temp. range of Indoor W.B. 15.0~24.0°C(59~75°F)
cooling Outdoor D.B. -5.0~43.0°C(23~109°F)
Heating capacity *2 kW 76.5
(Nominal) *2 kcal / h 65,800
*2 BTU / h 261,000
Power input kW 19.22
Current input A 32.4-30.8-29.7
COP kW / kW 3.98
Temp. range of Indoor D.B. 15.0~27.0°C(59~81°F)
heating Outdoor W.B. -20.0~15.5°C(-4~60°F)
Indoor unit Total capacity 50~130 % of outdoor unit capacity
connectable Model / Quantity P15~P250 / 1~32
Sound pressure level (measured in anechoic room) dB <A> 62
Refrigerant Liquid pipe mm (in.) 19.05(3/4) Brazed
piping diameter Gas pipe mm (in.) 34.93(1-3/8) Brazed
Set Model
Model PUHY-RP300YJM-B(-BS) PUHY-RP300YJM-B(-BS)
FAN Type x Quantity Propeller fan x 1 Propeller fan x 1
Air flow rate m3/ min 185 185
L/s 3,083 3,083
cfm 6,532 6,532
Control , Driving mechanism Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1 0.92 x 1
*3 External static press. 0 Pa (0 mmH2O) 0 Pa (0 mmH2O)
Compressor Type x Quantity Inverter scroll hermetic compressor Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter Inverter
Motor output kW 8.2 8.2
Case heater kW 0.045(240 V) 0.045(240 V)
Lubricant MEL32 MEL32
External finish Pre-coated galvanized steel sheets (+powder coating for -BS
type)
Pre-coated galvanized steel sheets (+powder coating for -BS
type)
<MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar>
External dimension HxWxD mm 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760
in. 67-3/8(65 without legs) x 36-1/4 x 29-15/16 67-3/8(65 without legs) x 36-1/4 x 29-15/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
Inverter circuit (COMP. / FAN) Over-heat protection, Over-current protection Over-heat protection, Over-current protection
Compressor Over-heat protection Over-heat protection
Fan motor Thermal switch Thermal switch
Refrigerant Type x original charge R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs)
Control LEV and HIC circuit
Net weight kg (lbs) 255(563) 255(563)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure
Pipe between unit and Liquid pipe mm (in.) 12.7(1/2) Brazed 12.7(1/2) Brazed
distributor Gas pipe mm (in.) 22.2(7/8) Brazed 22.2(7/8) Brazed
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External KD94G726
Wiring KE94C490 KE94C490
Standard attachment Document Installation Manual
Accessory Refrigerant conn. pipe
Optional parts Outdoor Twinning kit: CMY-RP100VBK
Header: CMY-Y104/108/1010-G
Remarks ●.Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be re-
ferred to the Installation Manual.
●.Due to continuing improvement, above specifications may be subject to change without notice.
●.Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Notes : Unit converter
1.Nominal cooling conditions (subject to JIS B8615-1)
Indoor: 27°CDB/19°CWB (81°FDB/66°FWB), Outdoor: 35°CDB (95°FDB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-1)
Indoor: 20°CDB (68°FDB), Outdoor: 7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.External static pressure option is available (30 Pa, 60 Pa/3.1 mmH2O, 6.1 mmH2O).
kcal =kW x 860
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg / 0.4536
*The specification data is
subject to rounding variation.

9
1. SPECIFICATIONS
OUTDOOR UNITS
Model PUHY-RP650YSJM-B(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 73.0
(Nominal) *1 kcal / h 62,800
*1 BTU / h 249,100
Power input kW 21.09
Current input A 35.6-33.8-32.6
COP kW / kW 3.46
Temp. range of Indoor W.B. 15.0~24.0°C(59~75°F)
cooling Outdoor D.B. -5.0~43.0°C(23~109°F)
Heating capacity *2 kW 81.5
(Nominal) *2 kcal / h 70,100
*2 BTU / h 278,100
Power input kW 21.73
Current input A 36.6-34.8-33.5
COP kW / kW 3.75
Temp. range of Indoor D.B. 15.0~27.0°C(59~81°F)
heating Outdoor W.B. -20.0~15.5°C(-4~60°F)
Indoor unit Total capacity 50~130 % of outdoor unit capacity
connectable Model / Quantity P15~P250 / 1~32
Sound pressure level (measured in anechoic room) dB <A> 62.5
Refrigerant Liquid pipe mm (in.) 19.05(3/4) Brazed
piping diameter Gas pipe mm (in.) 41.28(1-5/8) Brazed
Set Model
Model PUHY-RP300YJM-B(-BS) PUHY-RP350YJM-B(-BS)
FAN Type x Quantity Propeller fan x 1 Propeller fan x 1
Air flow rate m3/ min 185 185
L/s 3,083 3,083
cfm 6,532 6,532
Control , Driving mechanism Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1 0.92 x 1
*3 External static press. 0 Pa (0 mmH2O) 0 Pa (0 mmH2O)
Compressor Type x Quantity Inverter scroll hermetic compressor Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter Inverter
Motor output kW 8.2 9.9
Case heater kW 0.045(240 V) 0.045(240 V)
Lubricant MEL32 MEL32
External finish Pre-coated galvanized steel sheets (+powder coating for -BS
type)
Pre-coated galvanized steel sheets (+powder coating for -BS
type)
<MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar>
External dimension HxWxD mm 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760
in. 67-3/8(65 without legs) x 36-1/4 x 29-15/16 67-3/8(65 without legs) x 36-1/4 x 29-15/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
Inverter circuit (COMP. / FAN) Over-heat protection, Over-current protection Over-heat protection, Over-current protection
Compressor Over-heat protection Over-heat protection
Fan motor Thermal switch Thermal switch
Refrigerant Type x original charge R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs)
Control LEV and HIC circuit
Net weight kg (lbs) 255(563) 255(563)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure
Pipe between unit and Liquid pipe mm (in.) 12.7(1/2) Brazed 12.7(1/2) Brazed
distributor Gas pipe mm (in.) 22.2(7/8) Brazed 28.58(1-1/8) Brazed
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External KD94G726
Wiring KE94C490 KE94C490
Standard attachment Document Installation Manual
Accessory Refrigerant conn. pipe
Optional parts Outdoor Twinning kit: CMY-RP100VBK
Header: CMY-Y104/108/1010-G
Remarks ●.Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be re-
ferred to the Installation Manual.
●.Due to continuing improvement, above specifications may be subject to change without notice.
●.Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Notes : Unit converter
1.Nominal cooling conditions (subject to JIS B8615-1)
Indoor: 27°CDB/19°CWB (81°FDB/66°FWB), Outdoor: 35°CDB (95°FDB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-1)
Indoor: 20°CDB (68°FDB), Outdoor: 7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.External static pressure option is available (30 Pa, 60 Pa/3.1 mmH2O, 6.1 mmH2O).
kcal =kW x 860
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg / 0.4536
*The specification data is
subject to rounding variation.

1. SPECIFICATIONS
OUTDOOR UNITS 10
Model PUHY-RP700YSJM-B(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 80.0
(Nominal) *1 kcal / h 68,800
*1 BTU / h 273,000
Power input kW 22.22
Current input A 37.5-35.6-34.3
COP kW / kW 3.60
Temp. range of Indoor W.B. 15.0~24.0°C(59~75°F)
cooling Outdoor D.B. -5.0~43.0°C(23~109°F)
Heating capacity *2 kW 88.0
(Nominal) *2 kcal / h 75,700
*2 BTU / h 300,300
Power input kW 20.13
Current input A 33.9-32.2-31.1
COP kW / kW 4.37
Temp. range of Indoor D.B. 15.0~27.0°C(59~81°F)
heating Outdoor W.B. -20.0~15.5°C(-4~60°F)
Indoor unit Total capacity 50~130 % of outdoor unit capacity
connectable Model / Quantity P15~P250 / 1~32
Sound pressure level (measured in anechoic room) dB <A> 61.5
Refrigerant Liquid pipe mm (in.) 19.05(3/4) Brazed
piping diameter Gas pipe mm (in.) 41.28(1-5/8) Brazed
Set Model
Model PUHY-RP200YJM-B(-BS) PUHY-RP250YJM-B(-BS) PUHY-RP250YJM-B(-BS)
FAN Type x Quantity Propeller fan x 1 Propeller fan x 1 Propeller fan x 1
Air flow rate m3/ min 185 185 185
L/s 3,083 3,083 3,083
cfm 6,532 6,532 6,532
Control , Driving mechanism Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1 0.92 x 1 0.92 x 1
*3 External static press. 0 Pa (0 mmH2O) 0 Pa (0 mmH2O) 0 Pa (0 mmH2O)
Compressor Type x Quantity Inverter scroll hermetic compressor Inverter scroll hermetic compressor Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC
CORPORATION
AC&R Works, MITSUBISHI ELECTRIC
CORPORATION
AC&R Works, MITSUBISHI ELECTRIC
CORPORATION
Starting method Inverter Inverter Inverter
Motor output kW 4.8 6.8 6.8
Case heater kW 0.035(240 V) 0.045(240 V) 0.045(240 V)
Lubricant MEL32 MEL32 MEL32
External finish Pre-coated galvanized steel sheets
(+powder coating for -BS type)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar>
External dimension HxWxD mm 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760
in. 67-3/8(65 without legs) x 36-1/4 x 29-15/
16
67-3/8(65 without legs) x 36-1/4 x 29-15/
16
67-3/8(65 without legs) x 36-1/4 x 29-15/
16
Protection devices High pressure protection High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
Inverter circuit (COMP. / FAN) Over-heat protection, Over-current pro-
tection
Over-heat protection, Over-current pro-
tection
Over-heat protection, Over-current pro-
tection
Compressor Over-heat protection Over-heat protection Over-heat protection
Fan motor Thermal switch Thermal switch Thermal switch
Refrigerant Type x original charge R410A x 6.5kg (15lbs) R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs)
Control LEV and HIC circuit
Net weight kg (lbs) 230(508) 255(563) 255(563)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure
Pipe between unit and Liquid pipe mm (in.) 9.52(3/8) Brazed 9.52(3/8) Brazed 9.52(3/8) Brazed
distributor Gas pipe mm (in.) 19.05(3/4) Brazed 22.2(7/8) Brazed 22.2(7/8) Brazed
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External KD94G727
Wiring KE94C490 KE94C490 KE94C490
Standard attachment Document Installation Manual
Accessory Refrigerant conn. pipe
Optional parts Outdoor Twinning kit: CMY-RP200VBK
Header: CMY-Y104/108/1010-G
Remarks ●.Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be re-
ferred to the Installation Manual.
●.Due to continuing improvement, above specifications may be subject to change without notice.
●.Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Notes : Unit converter
1.Nominal cooling conditions (subject to JIS B8615-1)
Indoor: 27°CDB/19°CWB (81°FDB/66°FWB), Outdoor: 35°CDB (95°FDB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-1)
Indoor: 20°CDB (68°FDB), Outdoor: 7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.External static pressure option is available (30 Pa, 60 Pa/3.1 mmH2O, 6.1 mmH2O).
kcal =kW x 860
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg / 0.4536
*The specification data is
subject to rounding variation.

11
1. SPECIFICATIONS
OUTDOOR UNITS
Model PUHY-RP750YSJM-B(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 85.0
(Nominal) *1 kcal / h 73,100
*1 BTU / h 290,000
Power input kW 24.14
Current input A 40.7-38.7-37.3
COP kW / kW 3.52
Temp. range of Indoor W.B. 15.0~24.0°C(59~75°F)
cooling Outdoor D.B. -5.0~43.0°C(23~109°F)
Heating capacity *2 kW 95.0
(Nominal) *2 kcal / h 81,700
*2 BTU / h 324,100
Power input kW 21.78
Current input A 36.7-34.9-33.6
COP kW / kW 4.36
Temp. range of Indoor D.B. 15.0~27.0°C(59~81°F)
heating Outdoor W.B. -20.0~15.5°C(-4~60°F)
Indoor unit Total capacity 50~130 % of outdoor unit capacity
connectable Model / Quantity P15~P250 / 1~32
Sound pressure level (measured in anechoic room) dB <A> 62
Refrigerant Liquid pipe mm (in.) 19.05(3/4) Brazed
piping diameter Gas pipe mm (in.) 41.28(1-5/8) Brazed
Set Model
Model PUHY-RP250YJM-B(-BS) PUHY-RP250YJM-B(-BS) PUHY-RP250YJM-B(-BS)
FAN Type x Quantity Propeller fan x 1 Propeller fan x 1 Propeller fan x 1
Air flow rate m3/ min 185 185 185
L/s 3,083 3,083 3,083
cfm 6,532 6,532 6,532
Control , Driving mechanism Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1 0.92 x 1 0.92 x 1
*3 External static press. 0 Pa (0 mmH2O) 0 Pa (0 mmH2O) 0 Pa (0 mmH2O)
Compressor Type x Quantity Inverter scroll hermetic compressor Inverter scroll hermetic compressor Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC
CORPORATION
AC&R Works, MITSUBISHI ELECTRIC
CORPORATION
AC&R Works, MITSUBISHI ELECTRIC
CORPORATION
Starting method Inverter Inverter Inverter
Motor output kW 6.8 6.8 6.8
Case heater kW 0.045(240 V) 0.045(240 V) 0.045(240 V)
Lubricant MEL32 MEL32 MEL32
External finish Pre-coated galvanized steel sheets
(+powder coating for -BS type)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar>
External dimension HxWxD mm 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760
in. 67-3/8(65 without legs) x 36-1/4 x 29-15/
16
67-3/8(65 without legs) x 36-1/4 x 29-15/
16
67-3/8(65 without legs) x 36-1/4 x 29-15/
16
Protection devices High pressure protection High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
Inverter circuit (COMP. / FAN) Over-heat protection, Over-current pro-
tection
Over-heat protection, Over-current pro-
tection
Over-heat protection, Over-current pro-
tection
Compressor Over-heat protection Over-heat protection Over-heat protection
Fan motor Thermal switch Thermal switch Thermal switch
Refrigerant Type x original charge R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs)
Control LEV and HIC circuit
Net weight kg (lbs) 255(563) 255(563) 255(563)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure
Pipe between unit and Liquid pipe mm (in.) 9.52(3/8) Brazed 9.52(3/8) Brazed 9.52(3/8) Brazed
distributor Gas pipe mm (in.) 22.2(7/8) Brazed 22.2(7/8) Brazed 22.2(7/8) Brazed
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External KD94G727
Wiring KE94C490 KE94C490 KE94C490
Standard attachment Document Installation Manual
Accessory Refrigerant conn. pipe
Optional parts Outdoor Twinning kit: CMY-RP200VBK
Header: CMY-Y104/108/1010-G
Remarks ●.Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be re-
ferred to the Installation Manual.
●.Due to continuing improvement, above specifications may be subject to change without notice.
●.Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Notes : Unit converter
1.Nominal cooling conditions (subject to JIS B8615-1)
Indoor: 27°CDB/19°CWB (81°FDB/66°FWB), Outdoor: 35°CDB (95°FDB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-1)
Indoor: 20°CDB (68°FDB), Outdoor: 7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.External static pressure option is available (30 Pa, 60 Pa/3.1 mmH2O, 6.1 mmH2O).
kcal =kW x 860
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg / 0.4536
*The specification data is
subject to rounding variation.

1. SPECIFICATIONS
OUTDOOR UNITS 12
Model PUHY-RP800YSJM-B(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 90.0
(Nominal) *1 kcal / h 77,400
*1 BTU / h 307,100
Power input kW 25.49
Current input A 43.0-40.8-39.4
COP kW / kW 3.53
Temp. range of Indoor W.B. 15.0~24.0°C(59~75°F)
cooling Outdoor D.B. -5.0~43.0°C(23~109°F)
Heating capacity *2 kW 100.0
(Nominal) *2 kcal / h 86,000
*2 BTU / h 341,200
Power input kW 23.75
Current input A 40.0-38.0-36.7
COP kW / kW 4.21
Temp. range of Indoor D.B. 15.0~27.0°C(59~81°F)
heating Outdoor W.B. -20.0~15.5°C(-4~60°F)
Indoor unit Total capacity 50~130 % of outdoor unit capacity
connectable Model / Quantity P15~P250 / 1~32
Sound pressure level (measured in anechoic room) dB <A> 62.5
Refrigerant Liquid pipe mm (in.) 19.05(3/4) Brazed
piping diameter Gas pipe mm (in.) 41.28(1-5/8) Brazed
Set Model
Model PUHY-RP250YJM-B(-BS) PUHY-RP250YJM-B(-BS) PUHY-RP300YJM-B(-BS)
FAN Type x Quantity Propeller fan x 1 Propeller fan x 1 Propeller fan x 1
Air flow rate m3/ min 185 185 185
L/s 3,083 3,083 3,083
cfm 6,532 6,532 6,532
Control , Driving mechanism Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1 0.92 x 1 0.92 x 1
*3 External static press. 0 Pa (0 mmH2O) 0 Pa (0 mmH2O) 0 Pa (0 mmH2O)
Compressor Type x Quantity Inverter scroll hermetic compressor Inverter scroll hermetic compressor Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC
CORPORATION
AC&R Works, MITSUBISHI ELECTRIC
CORPORATION
AC&R Works, MITSUBISHI ELECTRIC
CORPORATION
Starting method Inverter Inverter Inverter
Motor output kW 6.8 6.8 8.2
Case heater kW 0.045(240 V) 0.045(240 V) 0.045(240 V)
Lubricant MEL32 MEL32 MEL32
External finish Pre-coated galvanized steel sheets
(+powder coating for -BS type)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar>
External dimension HxWxD mm 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760
in. 67-3/8(65 without legs) x 36-1/4 x 29-15/
16
67-3/8(65 without legs) x 36-1/4 x 29-15/
16
67-3/8(65 without legs) x 36-1/4 x 29-15/
16
Protection devices High pressure protection High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
Inverter circuit (COMP. / FAN) Over-heat protection, Over-current pro-
tection
Over-heat protection, Over-current pro-
tection
Over-heat protection, Over-current pro-
tection
Compressor Over-heat protection Over-heat protection Over-heat protection
Fan motor Thermal switch Thermal switch Thermal switch
Refrigerant Type x original charge R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs)
Control LEV and HIC circuit
Net weight kg (lbs) 255(563) 255(563) 255(563)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure
Pipe between unit and Liquid pipe mm (in.) 9.52(3/8) Brazed 9.52(3/8) Brazed 12.7(1/2) Brazed
distributor Gas pipe mm (in.) 22.2(7/8) Brazed 22.2(7/8) Brazed 22.2(7/8) Brazed
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External KD94G727
Wiring KE94C490 KE94C490 KE94C490
Standard attachment Document Installation Manual
Accessory Refrigerant conn. pipe
Optional parts Outdoor Twinning kit: CMY-RP200VBK
Header: CMY-Y104/108/1010-G
Remarks ●.Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be re-
ferred to the Installation Manual.
●.Due to continuing improvement, above specifications may be subject to change without notice.
●.Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Notes : Unit converter
1.Nominal cooling conditions (subject to JIS B8615-1)
Indoor: 27°CDB/19°CWB (81°FDB/66°FWB), Outdoor: 35°CDB (95°FDB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-1)
Indoor: 20°CDB (68°FDB), Outdoor: 7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.External static pressure option is available (30 Pa, 60 Pa/3.1 mmH2O, 6.1 mmH2O).
kcal =kW x 860
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg / 0.4536
*The specification data is
subject to rounding variation.

13
1. SPECIFICATIONS
OUTDOOR UNITS
Model PUHY-RP850YSJM-B(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 96.0
(Nominal) *1 kcal / h 82,600
*1 BTU / h 327,600
Power input kW 27.11
Current input A 45.7-43.4-41.9
COP kW / kW 3.54
Temp. range of Indoor W.B. 15.0~24.0°C(59~75°F)
cooling Outdoor D.B. -5.0~43.0°C(23~109°F)
Heating capacity *2 kW 108.0
(Nominal) *2 kcal / h 92,900
*2 BTU / h 368,500
Power input kW 26.47
Current input A 44.6-42.4-40.9
COP kW / kW 4.08
Temp. range of Indoor D.B. 15.0~27.0°C(59~81°F)
heating Outdoor W.B. -20.0~15.5°C(-4~60°F)
Indoor unit Total capacity 50~130 % of outdoor unit capacity
connectable Model / Quantity P15~P250 / 1~32
Sound pressure level (measured in anechoic room) dB <A> 63.5
Refrigerant Liquid pipe mm (in.) 19.05(3/4) Brazed
piping diameter Gas pipe mm (in.) 41.28(1-5/8) Brazed
Set Model
Model PUHY-RP250YJM-B(-BS) PUHY-RP300YJM-B(-BS) PUHY-RP300YJM-B(-BS)
FAN Type x Quantity Propeller fan x 1 Propeller fan x 1 Propeller fan x 1
Air flow rate m3/ min 185 185 185
L/s 3,083 3,083 3,083
cfm 6,532 6,532 6,532
Control , Driving mechanism Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1 0.92 x 1 0.92 x 1
*3 External static press. 0 Pa (0 mmH2O) 0 Pa (0 mmH2O) 0 Pa (0 mmH2O)
Compressor Type x Quantity Inverter scroll hermetic compressor Inverter scroll hermetic compressor Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC
CORPORATION
AC&R Works, MITSUBISHI ELECTRIC
CORPORATION
AC&R Works, MITSUBISHI ELECTRIC
CORPORATION
Starting method Inverter Inverter Inverter
Motor output kW 6.8 8.2 8.2
Case heater kW 0.045(240 V) 0.045(240 V) 0.045(240 V)
Lubricant MEL32 MEL32 MEL32
External finish Pre-coated galvanized steel sheets
(+powder coating for -BS type)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar>
External dimension HxWxD mm 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760
in. 67-3/8(65 without legs) x 36-1/4 x 29-15/
16
67-3/8(65 without legs) x 36-1/4 x 29-15/
16
67-3/8(65 without legs) x 36-1/4 x 29-15/
16
Protection devices High pressure protection High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
Inverter circuit (COMP. / FAN) Over-heat protection, Over-current pro-
tection
Over-heat protection, Over-current pro-
tection
Over-heat protection, Over-current pro-
tection
Compressor Over-heat protection Over-heat protection Over-heat protection
Fan motor Thermal switch Thermal switch Thermal switch
Refrigerant Type x original charge R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs)
Control LEV and HIC circuit
Net weight kg (lbs) 255(563) 255(563) 255(563)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure
Pipe between unit and Liquid pipe mm (in.) 9.52(3/8) Brazed 12.7(1/2) Brazed 12.7(1/2) Brazed
distributor Gas pipe mm (in.) 22.2(7/8) Brazed 22.2(7/8) Brazed 22.2(7/8) Brazed
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External KD94G727
Wiring KE94C490 KE94C490 KE94C490
Standard attachment Document Installation Manual
Accessory Refrigerant conn. pipe
Optional parts Outdoor Twinning kit: CMY-RP200VBK
Header: CMY-Y104/108/1010-G
Remarks ●.Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be re-
ferred to the Installation Manual.
●.Due to continuing improvement, above specifications may be subject to change without notice.
●.Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Notes : Unit converter
1.Nominal cooling conditions (subject to JIS B8615-1)
Indoor: 27°CDB/19°CWB (81°FDB/66°FWB), Outdoor: 35°CDB (95°FDB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-1)
Indoor: 20°CDB (68°FDB), Outdoor: 7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.External static pressure option is available (30 Pa, 60 Pa/3.1 mmH2O, 6.1 mmH2O).
kcal =kW x 860
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg / 0.4536
*The specification data is
subject to rounding variation.

1. SPECIFICATIONS
OUTDOOR UNITS 14
Model PUHY-RP900YSJM-B(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 101.0
(Nominal) *1 kcal / h 86,900
*1 BTU / h 344,600
Power input kW 28.29
Current input A 47.7-45.3-43.7
COP kW / kW 3.57
Temp. range of Indoor W.B. 15.0~24.0°C(59~75°F)
cooling Outdoor D.B. -5.0~43.0°C(23~109°F)
Heating capacity *2 kW 113.0
(Nominal) *2 kcal / h 97,200
*2 BTU / h 385,600
Power input kW 28.39
Current input A 47.9-45.5-43.8
COP kW / kW 3.98
Temp. range of Indoor D.B. 15.0~27.0°C(59~81°F)
heating Outdoor W.B. -20.0~15.5°C(-4~60°F)
Indoor unit Total capacity 50~130 % of outdoor unit capacity
connectable Model / Quantity P15~P250 / 1~32
Sound pressure level (measured in anechoic room) dB <A> 64
Refrigerant Liquid pipe mm (in.) 19.05(3/4) Brazed
piping diameter Gas pipe mm (in.) 41.28(1-5/8) Brazed
Set Model
Model PUHY-RP300YJM-B(-BS) PUHY-RP300YJM-B(-BS) PUHY-RP300YJM-B(-BS)
FAN Type x Quantity Propeller fan x 1 Propeller fan x 1 Propeller fan x 1
Air flow rate m3/ min 185 185 185
L/s 3,083 3,083 3,083
cfm 6,532 6,532 6,532
Control , Driving mechanism Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1 0.92 x 1 0.92 x 1
*3 External static press. 0 Pa (0 mmH2O) 0 Pa (0 mmH2O) 0 Pa (0 mmH2O)
Compressor Type x Quantity Inverter scroll hermetic compressor Inverter scroll hermetic compressor Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC
CORPORATION
AC&R Works, MITSUBISHI ELECTRIC
CORPORATION
AC&R Works, MITSUBISHI ELECTRIC
CORPORATION
Starting method Inverter Inverter Inverter
Motor output kW 8.2 8.2 8.2
Case heater kW 0.045(240 V) 0.045(240 V) 0.045(240 V)
Lubricant MEL32 MEL32 MEL32
External finish Pre-coated galvanized steel sheets
(+powder coating for -BS type)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
Pre-coated galvanized steel sheets
(+powder coating for -BS type)
<MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar>
External dimension HxWxD mm 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760
in. 67-3/8(65 without legs) x 36-1/4 x 29-15/
16
67-3/8(65 without legs) x 36-1/4 x 29-15/
16
67-3/8(65 without legs) x 36-1/4 x 29-15/
16
Protection devices High pressure protection High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
High pressure sensor, High pressure
switch at 4.15,3.3MPa (601,479 psi)
Inverter circuit (COMP. / FAN) Over-heat protection, Over-current pro-
tection
Over-heat protection, Over-current pro-
tection
Over-heat protection, Over-current pro-
tection
Compressor Over-heat protection Over-heat protection Over-heat protection
Fan motor Thermal switch Thermal switch Thermal switch
Refrigerant Type x original charge R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs) R410A x 9.0kg (20lbs)
Control LEV and HIC circuit
Net weight kg (lbs) 255(563) 255(563) 255(563)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure
Pipe between unit and Liquid pipe mm (in.) 12.7(1/2) Brazed 12.7(1/2) Brazed 12.7(1/2) Brazed
distributor Gas pipe mm (in.) 22.2(7/8) Brazed 22.2(7/8) Brazed 22.2(7/8) Brazed
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External KD94G727
Wiring KE94C490 KE94C490 KE94C490
Standard attachment Document Installation Manual
Accessory Refrigerant conn. pipe
Optional parts Outdoor Twinning kit: CMY-RP200VBK
Header: CMY-Y104/108/1010-G
Remarks ●.Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be re-
ferred to the Installation Manual.
●.Due to continuing improvement, above specifications may be subject to change without notice.
●.Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Notes : Unit converter
1.Nominal cooling conditions (subject to JIS B8615-1)
Indoor: 27°CDB/19°CWB (81°FDB/66°FWB), Outdoor: 35°CDB (95°FDB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-1)
Indoor: 20°CDB (68°FDB), Outdoor: 7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.External static pressure option is available (30 Pa, 60 Pa/3.1 mmH2O, 6.1 mmH2O).
kcal =kW x 860
BTU/h =kW x 3,412
cfm =m3/min x 35.31
lbs =kg / 0.4536
*The specification data is
subject to rounding variation.

15
2. EXTERNAL DIMENSIONS
OUTDOOR UNITS
2. EXTERNAL DIMENSIONS
172
143 142
ø15.88 Brazed
(ø12.7 Brazed) (ø28.58 Brazed)
ø34.93 Brazed
ø12.7 Brazed
ø28.58 Brazed
(ø22.2 Brazed)
ø28.58 Brazed
(ø19.05 Brazed)
PUHY-RP350YJM-B(-BS) PUHY-RP300YJM-B(-BS)
ø12.7 Brazed
(ø9.52 Brazed)
BA
150 145
CGasLiquid
GasLiquid
Connection specifications for the refrigerant service valve
PUHY-RP250YJM-B(-BS)
PUHY-RP200YJM-B(-BS)
Position dimensions for the refrigerant service valve
(Mounting pitch)
(Mounting pitch)
Refrigerant service valve <gas>
Refrigerant service valve <liquid>
Model
Connecting pipe specifications
2×2-14×20 Oval hole
Refrigerant service valve <gas>
Refrigerant service valve <liquid>
ø34 Knockout hole
ø52 Knockout hole ø52 or ø27 Knockout hole
ø65 or ø40 Knockout hole
150 × 92 Knockout hole
102 × 72 Knockout hole
Front through hole
Bottom through hole Front through hole
Front through hole Bottom through hole
Front through hole
For transmission cables
For wires
For pipes
SpecificationsUsage
NO.
Note1. Please refer to the next page for information
regarding necessary spacing around the unit and foundation work.
2. The detachable leg can be removed at site. 3. At brazing of pipes, wrap the refrigerant service valve
with wet cloth and keep the temperature of refrigerant service valve under 120°C.
<Accessories>
Connecting pipe
<Gas> · Elbow (IDø25.4 × ODø25.4)
· Pipe (IDø25.4 × ODø19.05) · Pipe (IDø25.4 × ODø22.2) · Pipe (IDø25.4 × ODø28.58) · Pipe (IDø25.4 × ODø34.93)
<Liquid> · Pipe (IDø9.52 × ODø9.52)
· Pipe (IDø9.52 × ODø12.7) · Pipe (IDø12.7 × ODø12.7) · Pipe (IDø12.7 × ODø15.88)
···RP200, RP250, RP300, RP350 1 pc.
1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc.
···RP200 ···RP250, RP300 ···RP200, RP250, RP300, RP350 ···RP350 ···RP200, RP250, RP300 ···RP200, RP250, RP300 ···RP350 ···RP350
*2 *2
*2
*2
*2
221 150
145
*1
*1 Connect by using the connecting pipes (for bottom piping and front piping)
that are supplied.
*2 Indicates dimensions and connection specifications in the case the unit is
used in combination with other outdoor units.
83
(front and back, 2 points)
Note 2*
5555
60 60
760
A
B
(60)
Detachable leg
(60)
1710
72
(760)
Control box
80 760 80
18 724 (721~727) 18
92 86
131
251
186
132
6
5
4
3
2
1
25
Intake air
90
204
102
251
240
Intake air
Service panel
1410
1650
760
920
88
25
54
Intake air
Discharge air
C
98
Front view
Left side view
Top view
Bottom view
PUHY-RP200, 250, 300, 350YJM-B(-BS)
Unit : mm

2. EXTERNAL DIMENSIONS
OUTDOOR UNITS 16
Secure enough space around the unit as shown in the figure below. When the height of the walls on the front, back or on the sides <H>
exceeds the wall height limit as defined below, add the height that exceeds the height limit <h> to the figures that are marked with an asterisk.
1. Required space around the unit
In case of single installation
2. Foundation work
<Wall height limit> Front: Up to the unit height
Back: Up to 500 mm from
the unit bottom
Side: Up to the unit height
<field supply required> <field supply required>
Detachable leg
Detachable leg
Corner of the installation leg
M10 anchor bolt <field supply required>
30 mm max.
• With a space of at least
300 mm to the wall on the back of the unit
• With a space of at least
100 mm to the wall on the back of the unit
30 mm max.
<Side view>
H
h
h
H
Front
<Top view> <Top view>
Front
Corner of the installation leg
M10 anchor bolt <field supply required>
Front
Unit height
<To be left open>
<To be left open>
<To be left open>
<To be left open>
<To be left open>
<To be left open>
<To be left open>
30 min.
450 min. 450 min.
15 min.* 15 min.* 50 min.* 50 min.*
300 min.*
450 min.*
100 min.*
450 min.*
300 min.*450 min.*
100 min.*450 min.*
100 min. 450 min.* 450 min. 450 min. 100 min.*
15 min.*
300 min.*900 min.300 min.*
300 min.*900 min.
1000 min.*
500
When the pipes or cables are routed at the bottom of the unit, make sure that the through hole at the base of the unit does not get blocked with the installation base. Refer to the Installation Manual when installing units on an installation base.
In case of collective installation
When multiple units are installed adjacent to each other, secure enough space to allow for air circulation and walkway between groups of units as shown in the figures below. At least two sides must be left open. As with the single installation, add the height that exceeds the height limit <h> to the figures that are marked with an asterisk. If there is a wall at both the front and the rear of the unit, install up to six units consecutively in the side direction and provide a space of 1000 mm or more as inlet space/ passage space for each six units.
Take into consideration the surface strength, water drainage route,
piping route, and wiring route when preparing the installation site. <Note that the drain water comes out of the unit during operation.> Build the foundation in such way that the corner of the installation leg is securely supported as shown in the right figure. (Fig.A, B) When using a rubber isolating cushion, please ensure it is large enough to cover the entire width of each of the unit's legs. The protrusion length of the anchor bolt must not exceed 30 mm. (Fig.A, B) Use four fixing plates as shown in the right figure <field supply required> when using post-installed anchor bolts. (Fig.C, D) To prevent small animals and water and snow from entering the unit and damaging its parts, close the gap around the edges of through holes for pipes and wires with filler plates <field supply required>.
<Unit: mm>
Front
Front
Wall <H> Wall <H> Wall <H>
Wall <H> Wall <H>
Wall <H> Wall <H> Wall <H>
<To be left open>
<To be left open>
Front
<To be left open>
<Unit: mm>
Front
Wall <H>
Wall <H>
Front
Front
Front
Front
Front
Front
Fixing plate Fixing plate
Fig.D (with detachable legs)
Fig.C (without detachable legs)
Fig.B (with detachable legs)
Fig.A (without detachable legs)
PUHY-RP200, 250, 300, 350YJM-B(-BS)
Unit : mm

17
2. EXTERNAL DIMENSIONS
OUTDOOR UNITS
Detachable leg
Note 2*
Note 1. Connect the pipes as shown in the figure above. Refer to the table above for the pipe size.
2. The detachable leg can be removed at site. 3. Twinning pipes should not be tilted more than 15 degrees from the horizontal plane.
Be sure to see the Installation Manual for details of Twinning pipe installation.
4. The pipe section before the Twinning pipe (sections "a" and "b" in the figure) must have at least 500 mm of straight section
(*including the straight pipe that is supplied with the Twinning pipe).
5. Only use the Twinning pipe by Mitsubishi (optional parts).
ø19.05
ø41.28
a
Outdoor unit 2
760 920 30 920
ø9.52
RP350 ø28.58ø12.7 RP300 ø22.2ø12.7 RP250
PUHY-RP300YJM-B(-BS) PUHY-RP350YJM-B(-BS) PUHY-RP650YSJM-B(-BS)
PUHY-RP300YJM-B(-BS) PUHY-RP300YJM-B(-BS) PUHY-RP600YSJM-B(-BS)
PUHY-RP250YJM-B(-BS) PUHY-RP300YJM-B(-BS) PUHY-RP550YSJM-B(-BS)
PUHY-RP250YJM-B(-BS) PUHY-RP250YJM-B(-BS) PUHY-RP500YSJM-B(-BS)
PUHY-RP200YJM-B(-BS) PUHY-RP250YJM-B(-BS) PUHY-RP450YSJM-B(-BS)
Twinning pipe~Outdoor unit
d or f
Gas
Liquid
c or e
RP200
Unit model
b
Gas
Liquid
Outdoor unit 1
ø9.52 ø19.05
ø22.2
(60) 1650
1710
Intake air
Outdoor unit 2Outdoor unit 1
Discharge air
Intake air Intake
air
Left side view
To indoor unit
Front view
c
db
a
f
e
Gas Twinning pipe <optional parts> Liquid Twinning pipe <optional parts>
To indoor unit
Twinning pipe connection size
PUHY-RP400YSJM-B(-BS) PUHY-RP200YJM-B(-BS) PUHY-RP200YJM-B(-BS)
Package unit name
Component unit name
Outdoor Twinning Kit (optional parts)
Indoor unit~Twinning pipe ø34.93
ø15.88
CMY-RP100VBK
PUHY-RP400, 450, 500, 550, 600, 650YSJM-B(-BS)
Unit : mm