MK Diamond Products BX-3 User manual

06.2015
BX-3 MASONRY SAW
OWNER'S MANUAL, PARTS LIST &
OPERATING INSTRUCTIONS
Caution: Read all safety and operating instructions
before using this equipment. This owners manual MUST
accompany the equipment at all times.
Revision 102
Manual Part No. 158168
www.mkdiamond.com

32
1
2
3
10
13
14
17
21
22
20
BX-3 EXPLODED VIEW
PARTS LIST: BX-3 SAW - P/N 157721

33
BX-3 PARTS LIST
Item Description Part # Qty
1 RIP GUIDE, BRICK/BLOCK SAW 132332-MK 1
2 ASSY, CONVYR CART 133082 1
3 WRENCH, TILESAW, 11/16 OPEN END 153450 1
4INSERT, MK-2000 ACCESSORY 153576 1
5CARTON, ACCESSORY MK-2000 154809 1
6 CARD, WARRANTY REGISTER SAW 155037 1
7SELL SHT, TILE ACCESSORY 156915 1
8CARTON, BLADE TOP 157187 1
9 CARTON, BLADE BOTTOM 157188 1
10 TAG, SERIAL NUMBER, BLANK 157500-RW 1
11 FILTER, MOTOR 157729 1
12 CARTON, BX-3 OUTER, PRINTED 157936 1
13 LABEL, BRICK XTREME 157958 1
14 LABEL, BX3 157959 1
15 OWNER'S MANUAL, BX3 158168 1
16 TIE, WIRE 48" X .345 158187 1
17 WRENCH, SHAFT NUT 12-14MM 158406 1
18 CARON, INSERT BX-3 159867 1
19 ASSY, WARN LBL, MASONRY, ELEC DRY 166011-ED 1
20 BLADE, CG, 14X125X1 10MM 166308 1
21 ASSY, FRAME, BX3 171265 1
22 ASSY, CUTTING HEAD, BX3 171266 1
PART LIST: BX-3 SAW - P/N 157721

34
1
2
3 4
5
6
7
8
BX-3 EXPLODED VIEW
PARTS LIST: ASSY, CONVYR CART BX-3 - P/N 133082

35
BX-3 PARTS LIST
Item Description Part # Qty
1 WHEEL, CONVEYOR CART 133090 4
2 BACKSTOP, CONVEYOR CART 134387 1
3 SCREW, HEX HD, 1/4-20 X3/4 152370 4
4 NUT, HEX, TW, 1/4-20 153941 4
5 NUT, HEX TW, 5/15-18 153942 4
6 TABLE, D.C. COMP 158144 1
7 WOOD STRIP, TABLE INSERT 158283 1
8 SCREW, DRYWL, FLAT, HD #6X1 159906 2
PARTS LIST: ASSY, CONVYR CART BX-3 - P/N 133082

36
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
BX-3 EXPLODED VIEW
PARTS LIST: ASSY, FRAME BX-3 - P/N 171265

37
BX-3 PARTS LIST
Item Description Part # Qty
1 WASHER, FLAT, SAE, 1/4 151915 6
2 SCREW, HEX HD, 1/4-20X3/4 152370 10
3 SCREW, 1/4-20 X 3/4 SOCKET HEAD CAP 152587 1
4 WASHER, LOCK, SPLIT, 1/4 152591 16
5 SCREW, SOC HD CAP, 1/4-20 X 1 154683 2
6 DC FRAME, RIGHT (COMP) 157367 1
7 DC FRAME, LEFT (COMP) 157369 1
8RAIL, TABLE GUIDE 157383 2
9 SUPPORT, HORIZ FRAME 157384 3
10 SCREW, SET, 14/-20X 1/4 157528 2
11 CLAMP, PIVOT (COMP) 157593 1
12 PIN, PIVOT 157645 1
13 SPRING, TORSION 157702 1
14 TUBE CONNECTOR 1/4-20 157930 6
15 PIN, DETENT, W/RING PULL 157933 1
16 STUD, GROOVED, #16X1/2 158071 2
17 LANYARD, 3/64X8" GALVNZD STEEL 158072 1
18 BLOCK, STOP 158226 1
19 SCREW, HEX HD 1/4-20 X 2 158282 6
PARTS LIST: ASSY, FRAME BX-3 - P/N 171265

38
BX-3 EXPLODED VIEW
1
2
3
4
5
6
7
8
9
10
11
12
13
14 15
16
17
18
19
20
21
22
23
24
25
18
PARTS LIST: BX-3 - ASSY, CUTTING HEAD P/N 171266

39
BX-3 PARTS LIST
Item Description Part # Qty
1 SCREW, SOC HD CAP, 1/4-20 X 1 151049 2
2 WASHER, FLAT, SAE, 1/4 151915 2
3 WASHER, LOCK, SPLIT, 1/4 152591 2
4 ARM, MOTOR MOUNT (COMP) 157599 1
5 FILTER, MOTOR 157729 1
6 MTR, 115V, 15A, AC 157801-C 1
7 HANDLE, LOWER 157874 1
8 HANDLE, UPPER 157875 1
9 PLATE, SWITCH MOUNTING 157876 1
10 CAP, MOTOR 157877 1
11 SPACER, NYLON 157878 1
12 SPACE, CAP SCREW 157879 2
13 WIRE COVER, BX3 157880 1
14 BUSHING, FLANGE 157932 2
15 FLANGE, OUTER 158105 1
16 FLANGE, Ø 3.0 INNER 158106 1
17 SCREW, HEX HD, FL, M10X20MM 158107 1
18 SCREW, PAN HD, M3.5X12MM 158156 8
19 SCREW, #8 X 1-1/2 FLAT HD PHIL 158157 2
20 SCREW, HEX HEAD CAP, M6X1X20MM 158158 4
21 WASHER, LOCK, SPLIT, M6 158159 4
22 SCREW, FLAT HD, ALN, #6-32X1-1/4 158160 1
23 WASHER, FLAT, SAE, #6 158231 6
24 ASSY, SWITCH 158323-MK 1
25 HARNESS, WIRE 158329-R 1
PARTS LIST: BX-3 - ASSY, CUTTING HEAD P/N 171266

40
ACCESSORIES AND REPLACEMENT PARTS:
NOITPIRCSEDREBMUNMETI
1.
157957 MK-BX10, Dry Cutting 14" Segmented Blade
2.
157944 MK-BX30, Dry Cutting 14" Segmented Block
Blade
3.
231276 Adjustable Cutting Guide*
4.
133090 Roller Wheel*
5.
156427 Protective Wooden Strip*
6.
157729 Motor Air Filter*
7.
152610 Ground Fault Circuit Interrupter
8.
157981 BX-3 Stand
(Stand contains Owners Manual)
*Included at time of shipping
BX-3 ACCESSORIES

41
NOTES

42
BX-3 ORDERING AND RETURN INFORMATION
ORDERING INFORMATION
You may order MK Diamond products through your local MK Diamond distributor or, you may order
direct from MK Diamond.
When ordering direct from MK Diamond, please have the following information ready before calling:
• The Model Number of the saw
• The Serial Number of the saw
• Where the saw was purchased and when
• The Part Number for the part(s) being ordered
• The Part Description for the part(s) being ordered
NOTE: There is a $25.00 minimum order when ordering direct from MK Diamond. A $6.00 charge will
be added to orders having a net billing value under $50.00. All purchases must be made using VISA,
MasterCard or American Express.
All parts may be ordered by calling toll free to – 800 421-5830 or 310 539-5221 and asking for
Customer Service. For technical questions, call – 800 474-5594.
RETURN MATERIALS POLICY
To expedite the service relative to the return of a product purchased through MK Diamond, please
observe the following:
NOTE: When returning all items, they must have been purchased within the previous twelve (12)
months.
• Have the Model Number of the saw
• Have the Serial Number of the saw
• Have the location of where the saw was purchased
• Have the date when the saw was purchased
• Contact Customer Service for approval to return the item(s)
• Obtain a Returned Goods Number (RGA) authorizing the return
• Follow the packaging instructions in the following section
• Ensure your item(s) are prepaid to the destination
For returned items, call toll free to – 800 421-5830 or 310 539-5221 and ask for Customer Service.
For technical questions, call – 800 474-5594 or 310 257-2845.
PACKAGING INSTRUCTIONS
• Remove the Cutting Head and Support Angle Assembly
• Dry the saw before shipping
• When packing, include the following: Saw, Diamond Blade, Blade Guard and Support Angle
Assembly and Adjustable Cutting Guide (Other Accessories are not required)
• Package the unit in its original container or one of comparable size (do not ship the unit partially
exposed)
• Ensure all parts are secured in the packaging to prevent moving
AUTHORIZED SERVICE CENTERS
For quicker repair time, you may contact MK Diamond Customer Service, toll free, at 800 421-5830
or 310 539-5221 for the Authorized Service Center closest too you or visit our web site at
www.mkdiamond.com. For technical questions, call – 800 474-5594.

43
BX-3 CONTACT AND LIMITED WARRANTY
CONTACT:
Please contact MK Diamond Products, Inc. Customer Service Department with any questions you
might have regarding distributors, parts or service.
Telephone: [phone]
Fax: [phone]
E-mail: [email protected]
Customer Service Hours: Monday through Friday, 6AM-4PM PST
MK Diamond Products, Inc.
1315 Storm Parkway
Torrance, CA 90501
© COPYRIGHT 2015, MK DIAMOND PRODUCTS, INC. ALL RIGHTS RESERVED.
The MK Diamond logo is a registered trademark of MK Diamond Products, Inc. and may not be used,
reproduced, or altered without written permission. All other trademarks are the property of their re-
spective owners and used with permission.
MK Diamond may have patents, patent applications, trade marks, copyrights of other intellectual
property right covering this product in this document.
This manual MUST accompany the equipment at all times. This manual is considered a permanent
part of the equipment and should remain with the unit if resold.
The information and specications included in this publication were in effect at the time of approval for
printing.
MK DIAMOND PRODUCTS, INC. will guarantee every machine they build, to be free from defects in
material and workmanship for (1) one year from date of purchase. The obligation of MK DIAMOND
PRODUCTS, INC. under this warranty is limited to the repair or replacement of any parts which,
under normal use, prove to be defective in material or workmanship. The parts involved or the unit
in question should be returned to MK DIAMOND PRODUCTS, INC. or to a point designated by us,
transportation prepaid.
This warranty does not obligate us to bear the cost of labor or transportation charges in connection
with replacement or repair of defective parts. Likewise, it shall NOT apply to any unit which has been
subjected to misuse, neglect or accident. This warranty does NOT apply to any machine which has
been repaired or altered outside our factory.
This warranty does NOT obligate MK DIAMOND PRODUCTS, INC., with respect to items not of our
manufacture, such as engines, motors, hydraulics, etc., which are subject to their own guarantees and
warranties.
We shall in no event be liable for consequential damages or contingent liabilities arising out of failure
of any equipment or parts to operate properly.
MK DIAMOND PRODUCTS, INC. LIMITED WARRANTY

BX-3
OWNER'S MANUAL & OPERATING INSTRUCTION
MK Diamond Products, Inc.
1315 Storm Parkway
Torrance, CA 90501
Toll-Free: [phone]
Phone: [phone]
Fax: [phone]
www.mkdiamond.com