MK Diamond Products MK-660 SERIES System manual

02.2015
MK-660 TILE SAW
OWNER'S MANUAL
PARTS LIST &
OPERATING INSTRUCTIONS
www.mkdiamond.com
Caution: Read all safety and operating instructions
before using this equipment. This parts list MUST
accompany the equipment at all times.
Revision 105
Manual Part# 153461

38
MK-660 TILE SAW EXPLODED VIEW

39
MK-660 TILE SAW PARTS LIST
ITEM DESCRIPTION QTY PART #
A Accessories 1 n/a
A1 Carton, Accessory Pack, 660 1 153498
A3 Wrench, 15/16 Closed End 1 134684
A4 Wrench, Spanner, 660 1 154362
A5 Curtain, Splash 1 134841
A6 Bracket, Splash Curtain 1 152571
A7 Wing-screw, 1/4-20 x 1/2 1 151888
A8 Washer, 1/4 SAE Flat 1 151915
A9 Pump, Water, G-150A 1 151271
A10 Fitting, Plastic, 1/4 FNPT x 1/4 BARB 1 128397
A11 Hose, Vinyl, 1/4 ID 2’ 132951
A12 Clamp, Flow, 1/4-1/2 1 154394
A13 Owner’s Manual, Water Pump 1 155745
A14 Rip Guide
Screw, 1/4-20 x 3/4 Thumb
1
1
134551
150991
A15 Large Bullnose Accessory
Screw, 1/4-20 x 3/4 Thumb
1
2
153201
150991
A16 Owner’s Manual, 660 1 153461
A19 Blade, 7 x 060 x 5/8, MK-100 1 153441
B Blade Guard, 7”, Assembly 1 154811-MK
B1 Guard, 7”Blade 1 151731
B2 Elbow, 1/8 MNPT x 1/4 BARB 90ϒ Brass 1 154652
B3 Knob, Davies 1 151681
B4 Washer, 5/16 SAE Flat 2 151754
B5 Wing-nut, 5/16-18 Nylock 1 151746
D Cutting Head (less blade guard) 1 n/a
D1 Cutting Head, 660 1 154291
D2 Cover, Cutting Head, 660 1 154293
D3 Gasket, Cover, 660 1 154381
D4 Screw, 10-24 x 5/8 Pan Head Phillips Self-Tapping Machine 8 153681
D5 Screw, 5/16-18 x 2 1/2 Hex Head Cap, Fully Threaded 1 151748
D6 Washer, 5/16 Split Lock 1 151747
D7 Motor, 3/4 HP 115V FWR, 660 1 154292
D7A Motor, 3/4 HP 230V FWR, 660 1 153497
D8 Gasket, Thermal, 660 1 154346
D9 Screw, 10-24 x 5/8 Flat Head Phillips Machine 4 154295
D10 Flange, Inner, 660 1 154194
D11 Pin, 1/8 x 3/8 Spring 1 154982
D12 Flange, Outer 1 135830
D13 Nut, 5/8-18 UNF Hex 1 135848
D14 Cord, AC Power 120V (16/3 SJTW x 10’, w/ molded 5-15P and Heyco
3251 Strain Relief)
1 153419
D15 Cord, Pump Pigtail, 16/3 SJTW x 1’, w/ molded 5-15R and Heyco 3251
Strain Relief
1 154446
D16 Wire Harness, 660 1 153415
D17 Screw, 10-24 x 3/8 Pan Head Phillips Self-Tapping Machine 1 151262
D18 Resistor, 660 1 153535
D19 Tack, 1/4 Head 4 155659
D20 Switch, Thermal Overload, 660 1 167982

40
ITEM DESCRIPTION QTY PART #
D21 Boot, Thermal Overload Switch 1 167983
D22 Switch, 15A\125V Lighted Rocker 1 153421
D23 Rectier, 40 Amp 1 153677
D24 Screw, 10-24 x 3/4 Fillister Head Machine 1 151750
D25 Wire-nut, 3/#16 AWG (Blue) 1 155492
D26 Tag, 660 Serial Number 1 156561
D27 Label, Caution Strip 1 155214
D28 Label, When Motor Cools… 1 154409
E Frame 1 n/a
E1 Frame 1 153322
E2 Pan, Plastic 1 151736
E3 Plug, Water Drain 1 153439
E4 Plate, Adjustment 2 151758
E5 Pin, Rolled 2 151783
F Guide Bar, 5/8 Dia. 1 151739-MK
F1 Bar, Guide, 5/8 Dia. 1 151739
F2 Cover, Guide Bar 1 151740
F3 Spacer, 5/8 Guide Bar Cover 2 151755
F4 Screw, 5/16-18 x 1 Hex Head Cap 2 151743
F5 Washer, 5/16 Split Lock 2 151747
F6 Washer, 5/16 SAE Flat 2 151754
G Linear Bearing 1 151737-MK
G1 Casting, Bearing, Linear 1 151737
G1a Bearing, Multi-Lube 2 151781
G2 Screw, 5/16-18 x 1 Hex Head Cap 2 151743
G3 Washer, 5/16 Split Lock 2 151747
G4 Washer, 5/16 SAE Flat 2 151754
H Post 1 n/a
H1 Post, Rear, 660
Shaft, 5/8 Pivot, 660
1
1
153451
153452
H2 Screw, 3/8-16 x 2 Hex Head Cap 2 153485
H3 Screw, 3/8-16 x 1 Hex Head Cap 1 152507
H4 Washer, 3/8 Split Lock 3 150925
H5 Washer, 3/8 SAE Flat 4 150923
H6 Knob, 3/8-16 x 1-1/2 MK Adjustment 1 156770-02
J Roller Wheel 1 151756
J1 Bracket, Roller Wheel 1 154021
J2 Wheel, Roller 1 151799
J3 Screw, 1/4-20 x 1 1/2 Hex Head Cap 1 151914
J4 Washer, 1/4 SAE Flat 1 151915
J5 Nut, 1/4-20 Hex 1 151893
K Table, 660 1 n/a
K1 Table, 660 1 152680
K2 Screw, 5/16-18 x 1 Hex Head Cap 2 151743
K3 Washer, 5/16 Split Lock 2 151747
K4 Washer, 5/16 SAE Flat 2 151754
MK-660 TILE SAW PARTS LIST

41
ITEM NUMBER DESCRIPTION
1. 158434 MK-225, 7 x 5/8 Arbor
2. 139311 MK-215, 7 x 5/8 Arbor
3. 153293 MK-315, 7 x 5/8 Arbor
4. 134577-MK Dual 45° Flat Angle Guide
5. 134569-MK 90° Protractor
6. 152792 Dressing Stone
7. 152601 Ground Fault circuit Interrupter
8. 153201-MK 45° Miter
9. 151889 Saw Stand
MK-660 TILE SAW ACCESSORIES

42
MK-660 TILE SAW ORDERING & RETURN INSTRUCTION
ORDERING INFORMATION
You may order MK Diamond products through your local MK Diamond distributor or, you may order
direct from MK Diamond.
When ordering direct from MK Diamond, please have the following information ready before calling:
• The Model Number of the saw
• The Serial Number of the saw
• Where the saw was purchased and when
• The Part Number for the part(s) being ordered
• The Part Description for the part(s) being ordered
NOTE: There is a $25.00 minimum order when ordering direct from MK Diamond. A $6.00 charge will
be added to orders having a net billing value under $50.00. All purchases must be made using VISA,
MasterCard or American Express.
All parts may be ordered by calling toll free to – 800 421-5830 or 310 539-5221 and asking for
Customer Service. For technical questions, call – 800 474-5594.
RETURN MATERIALS POLICY
To expedite the service relative to the return of a product purchased through MK Diamond, please
observe the following:
NOTE: When returning all items, they must have been purchased within the previous twelve (12)
months.
• Have the Model Number of the saw
• Have the Serial Number of the saw
• Have the location of where the saw was purchased
• Have the date when the saw was purchased
• Contact Customer Service for approval to return the item(s)
• Obtain a Returned Goods Number (RGA) authorizing the return
• Follow the packaging instructions in the following section
• Ensure your item(s) are prepaid to the destination
For returned items, call toll free to – 800 421-5830 or 310 539-5221 and ask for Customer Service.
For technical questions, call – 800 474-5594 or 310 257-2845.
PACKAGING INSTRUCTIONS
• Remove the Cutting Head and Support Angle Assembly
• Dry the saw before shipping
• When packing, include the following: Saw, Diamond Blade, Blade Guard and Support Angle
Assembly and Adjustable Cutting Guide (Other Accessories are not required)
• Package the unit in its original container or one of comparable size (do not ship the unit partially
exposed)
• Ensure all parts are secured in the packaging to prevent moving
AUTHORIZED SERVICE CENTERS
For quicker repair time, you may contact MK Diamond Customer Service, toll free, at 800 421-5830
or 310 539-5221 for the Authorized Service Center closest too you or visit our web site at
www.mkdiamond.com. For technical questions, call – 800 474-5594.

43
MK-660 TILE SAW CONTACT & WARRANTY
CONTACT
Please contact MK Diamond Products, Inc. Customer Service Department with any questions you
might have regarding distributors, parts or service.
Telephone: [phone]
Fax: [phone]
E-mail: [email protected]
Customer Service Hours: Monday through Friday, 6AM-4PM PST
MK Diamond Products, Inc.
1315 Storm Parkway
Torrance, CA 90501
© COPYRIGHT 2014, MK DIAMOND PRODUCTS, INC. ALL RIGHTS RESERVED.
The MK Diamond logo is a registered trademark of MK Diamond Products, Inc. and may not be used,
reproduced, or altered without written permission. All other trademarks are the property of their re-
spective owners and used with permission.
MK Diamond may have patents, patent applications, trade marks, copyrights of other intellectual
property right covering this product in this document.
This manual MUST accompany the equipment at all times. This manual is considered a permanent
part of the equipment and should remain with the unit if resold.
The information and specications included in this publication were in effect at the time of approval for
printing.
MK DIAMOND PRODUCTS, INC. will guarantee every machine they build, to be free from defects in
material and workmanship for (1) one year from date of purchase. The obligation of MK DIAMOND
PRODUCTS, INC. under this warranty is limited to the repair or replacement of any parts which,
under normal use, prove to be defective in material or workmanship. The parts involved or the unit
in question should be returned to MK DIAMOND PRODUCTS, INC. or to a point designated by us,
transportation prepaid.
This warranty does not obligate us to bear the cost of labor or transportation charges in connection
with replacement or repair of defective parts. Likewise, it shall NOT apply to any unit which has been
subjected to misuse, neglect or accident. This warranty does NOT apply to any machine which has
been repaired or altered outside our factory.
This warranty does NOT obligate MK DIAMOND PRODUCTS, INC., with respect to items not of our
manufacture, such as engines, motors, hydraulics, etc., which are subject to their own guarantees and
warranties.
We shall in no event be liable for consequential damages or contingent liabilities arising out of failure
of any equipment or parts to operate properly.
MK DIAMOND PRODUCTS, INC. LIMITED WARRANTY

MK-660 TILE SAW
OWNER'S MANUAL, PARTS LIST
& OPERATING INSTRUCTIONS
MK Diamond Products, Inc.
1315 Storm Parkway
Torrance, CA 90501
Toll-Free: [phone]
Phone: [phone]
Fax: [phone]
www.mkdiamond.com