MK Diamond Products MK-2000 PRO Series Technical Document

www.mkdiamond.com
Caution: Read all safety and operating instructions
before using this equipment. This owners manual MUST
accompany the equipment at all times.
MK-2000 ELECTRIC SERIES
MASONRY SAW
OWNER'S MANUAL,
OPERATING INSTRUCTION, &
PARTS LIST
05.2014
Revision 200
Manual Part No. 156402
MK-2002 PART # 150598
MK-2001SV PART # 161195

34
MK-2000 ELECTRIC SAW EXPLODED VIEW
18
1
2 3
4
5 6
7
8
9
10
11
12
13
14
15
16
19
20
22
6
6
6
21
MK-2002 Saw Assembly Part # 150598

35
MK-2000 ELECTRIC SAW PART LISTS
ITEM DESCRIPTION PART # QTY.
1WASHER, FLAT, USS, 3/8 101360 1
2FITTING, PLASTIC, 1/4 FNPTX1/4 BARB 128397 1
3HOSE, VINYL, 1/4X3/8 (32.0') 132951 1
4WRENCH, 3/4 BOX END 134056 1
5COLLAR, 1.13 ODX 625ID .5 WIDE 140012 2
6WASHER, FLAT, SAE, 3/8 150923 7
7PUMP, WATER, G-150A 151271 1
8NUT, HEX, NYLK, 3/8-16 152505 1
9SCREW, HEX HD CAP, 3/8-16 X 1 152507 1
10 SCREW, 3/8-16 X 2-1/4 HEX HEAD 153529 1
11 CLAMP, HOSE, 1/4-1/2 FLOW 154394 1
12 LABEL, MK BRICKSAW 12-1/2X1-3/4 155230 2
13 KNOB, TRI PLASTIC, 1" 156770-01 1
14 TAG, SERIAL NUMBER, BLANK 157500-RW 1
15 SCREW, DRIVE, RND HD, #7X5/16 157849 2
16 SCREW, SHOULDER 3/8 X 1/2 160078 1
17 MASONRY LABEL SHEET (NOT SHOWN) 166011 1
18 BLADE, CG, 14X125X1 10MM 166308 1
19 BAR, BLADE GUARD ADJ. 166602 1
20 BRACKET, HEIGHT ADJUSTMENT 166868 1
21 ASSY, CUTTING HEAD, 1.5 HP, 14" 170815 1
22 ASSY, FRAME, 2000 170818 1
MK-2002 Saw Assembly Part # 150598

36
MK-2000 ELECTRIC SAW EXPLODED VIEW
18
1
2 3
4
5 6
7
8
9
10
11
12
13
14
15
16
19
20
22
6
6
6
21
MK-2001SV Saw Assembly Part # 161195

37
MK-2000 ELECTRIC SAW PARTS LIST
ITEM DESCRIPTION PART # QTY.
1WASHER, FLAT, USS, 3/8 101360 1
2FITTING, PLASTIC, 1/4 FNPTX1/4 BARB 128397 1
3HOSE, VINYL, 1/4X3/8 (32.0') 132951 1
4WRENCH, 3/4 BOX END 134056 1
5COLLAR, 1.13 ODX 625ID .5 WIDE 140012 2
6WASHER, FLAT, SAE, 3/8 150923 7
7PUMP, WATER, G-150A 151271 1
8NUT, HEX, NYLK, 3/8-16 152505 1
9SCREW, HEX HD CAP, 3/8-16 X 1 152507 1
10 SCREW, 3/8-16 X 2-1/4 HEX HEAD 153529 1
11 CLAMP, HOSE, 1/4-1/2 FLOW 152394 1
12 LABEL, MK BRICKSAW 12-1/2X1-3/4 155230 2
13 KNOB, TRI PLASTIC, 1" 156770-01 1
14 TAG, SERIAL NUMBER, BLANK 157500-RW 1
15 SCREW, DRIVE, RND HD, #7X5/16 157849 2
16 SCREW, SHOULDER 3/8 X 1/2 160078 1
17 MASONRY LABEL SHEET (NOT SHOWN) 166011 1
18 BLADE, CG, 14X125X1 10MM 166308 1
19 BAR, BLADE GUARD ADJ. 166602 1
20 BRACKET, HEIGHT ADJUSTMENT 166868 1
21 ASSY, CUTTING HEAD, 1.5 HP, 14" 170813 1
22 ASSY, FRAME, 2000 170818 1
MK-2001SV Saw Assembly Part # 161195

38
MK-2000 ELECTRIC SAW EXPLODED VIEW
1
2
3
8
9
10
12
13
16
18
19
7
20
21
22
23
29
26
27
30
31
28
10
10 18
11
14
2
25
21
34
4
5
6
15
24
11
25
17
32
33
Assy. Cutting Head, 1.5 HP, 14" Part # 170813

39
MK-2000 ELECTRIC SAW PARTS LIST
ITEM DESCRIPTION PART # QTY.
1HANDLE, BRICKSAW 139931 1
2KEY, 3/16 SQ X 1-1/8 150344 2
3STUD, BLD GUARD 150581 1
4STRAP, MOTOR ADJ 150584 1
5CASTING, 2000, BLT GRD INNR-COMP 150590 1
6BLT GRD OUTR-COMP 150591 1
7SCREW, HEX HD, CAP, 5/16-18X1-3/4 150919 2
8WASHER, FLAT, SAE, 3/8 150923 1
9WASHER, LOCK, SPLIT, 5/16 151747 2
10 WASHER, FLAT, SAE, 5/16 151754 8
11 WASHER, FLAT, SAE, 1/4 151915 3
12 SCREW, HEX HD, 1/4-20X/34 152370 2
13 SCREW, HEX HD CAP, 3/8-16 X 1 152507 2
14 WASHER, LOCK, SPLIT, 1/4 152591 2
15 SCREW, 1/4-20 X 1/2 HEX HEAD 152608 1
16 BOLT, 3/8-16 X 4 HEX HEAD TAP 152678 1
17 ELBOW, 1/4 NPT X 45 STREET 153869 1
18 NUT, HEX, TW 5/16-18 153942 6
19 NUT, 1/2-13 HEX 153943 1
20 ASSY, ARBOR, MK-2000 154636 1
21 SCREW, 5/16-18 X 3/8 SOCKET HEAD SET 157083 4
22 GRIP, HANDLE 7/8 ID 158608 1
23 SPRING, TORSION, 50 DEG 160069 1
24 GUARD, SPLASH 160310 1
25 SCREW, 5/16-18 X 1-3/4 HEX HEAD MACHINE 160948 6
26 PULLEY, 10J28 X 5/8 BORE 160949 1
27 PULLEY, 10J19 X .75 BORE 160950 1
28 BELT, 10J340 160925 1
29 ASSY, MOTOR MOUNT, MK-2000 160966 1
30 MOTOR, 1.5HP 60HZ 1725R.P.M. 1 PH 161099 1
31 ASSY, SWITCH BOX, 30AMP, LTF11 161101 1
32 FITTING, PUSH ON HOSE 1/4 X 1/4 MALE 165183 1
33 VALVE, BALL 1/4"M X 1/4"F 231248 1
34 CASTING, 2000, BLD GRD-COMP 150579G 1
Assy. Cutting Head, 1.5 HP, 14" Part # 170813

40
MK-2000 ELECTRIC SAW EXPLODED VIEW
3
4
5
10
12
13
15
16
19
21
22
9
23
24
26
30
13
13
21
14
17
25
29
24
35
6
7
8
18
28
14
29
1
2
11
33
20
31
34
27
32
Assy. Cutting Head, 2 HP, 14" Part # 170815

41
MK-2000 ELECTRIC SAW PARTS LIST
ITEM DESCRIPTION PART # QTY.
1PULLEY, 1A22 X 5/8" BORE 133140 1
2PULLEY, 1A22 X 5/8" BORE 133157 1
3HANDLE, BRICKSAW 139931 1
4KEY, 3/16 SQ X 1-1/8 150344 1
5STUD, BLD GUARD 150581 1
6STRAP, MOTOR ADJ 150584 1
7CASTING, 2000, BLTGRD INNR-COMP 150590 1
8BLT GRD OUTR-COMP 150591 1
9SCREW, HEX HD, CAP, 5/16-18X1-3/4 150919 2
10 WASHER, FLAT, SAE, 3/8 150923 1
11 BELT, AX32 151723 1
12 WASHER, LOCK, SPLIT, 5/16 151747 2
13 WASHER, FLAT, SAE, 5/16 151754 8
14 WASHER, FLAT, SAE, 1/4 151915 3
15 SCREW, HEX HD, 1/4-20X3/4 152370 2
16 SCREW, HEX HD CAP, 3/8-16 X 1 152507 2
17 WASHER, LOCK, SPLIT, 1/4 152591 2
18 SCREW, 1/4-20 X 1/2 HEX HEAD 152608 1
19 BOLT, 3/8-16 X 4 HEX HEAD TAP 152678 1
20 ELBOW, 1/4 NPT X 45 STREET 153869 1
21 NUT, HEX, TW, 5/16-18 153942 6
22 NUT, 1/2-13 HEX 153943 1
23 ASSY, ARBOR, MK-2000 154636 1
24 SCREW, 5/16-18 X 3/8 SOCKET HEAD SET 157083 2
25 KEY, 3/16 X 3/16 X 1-3/4 157561 1
26 GRIP, HANDLE 7/8 ID 158608 1
27 SPRING, TORSION, 50 DEG 160069 1
28 GUARD, SPLASH 160310 1
29 SCREW, 5/16-18 X 1-3/4 HEX HEAD MACHINE 160948 6
30 ASSY, MOTOR MOUNT, MK-2000 160966 1
31 FITTING, PUSH ON HOSE 1/4 X 1/4 MALE 165183 1
32 ASSY, 30A SWITCHBOX, LTF21 166022 1
33 MTR, 2HP 115/230V60HZ, NO SWITCH 231095-RW 1
34 VALVE, BALL 1/4"M X 1/4"F 231248 1
35 CASTING, 2000, BLD GRD-COMP 150579G 1
Assy. Cutting Head, 2 HP, 14" Part # 170815

42
MK-2000 ELECTRIC SAW EXPLODED VIEW
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
7
8
Assy. Frame Part # 170818

43
MK-2000 ELECTRIC SAW PARTS LIST
ITEM DESCRIPTION PART # QTY.
1ASSY, CONVYR CART 133082 1
2SCREW, HEX HD, CAP, 5/16-18X1-3/4 150919 8
3SCREW, HEX HD, 3/8-16 X 1-3/4 150920 1
4WASHER, FLAT, SAE, 3/8 150923 1
5WASHER, LOCK, SPLIT, 3/8 150925 1
6SCREW, HEX HD, 5/16-18X1 151743 4
7WASHER, LOCK, SPLIT, 5/16 151747 13
8WASHER, FLAT, SAE, 5/16 151754 13
9NUT, HEX, 1/4-20 151893 1
10 WASHER, FLAT, SAE, 1/4 151915 2
11 SCREW, 5/16-18 X 1-1/2 HEX HEAD MACHINE 152467 1
12 CLAMP, 1/2 CUSHION LOOP 152471 1
13 WASHER, LOCK, SPLIT, 1/4 152591 1
14 PLUG, RBBR DRAIN W/O HOLE 153439 1
15 NUT, WELD, SLAB. 3/8-16 153945 1
16 ROD, SPLASH CURTAIN 153956 1
17 SHAFT, PIVOT, 5/8 154147 1
18 SCREW, HEX HD 1/4-20 X 2 158282 1
19 WELDMENT, BASE FRAME 158845 1
20 POST (COMP) 158846 2
21 STUD, SPRING RETAINING 160066 1
22 BRACKET, STAY LEVEL CLIPPER PAV 160068 1
23 BRACKET, PIVOT SHAFT 160070 1
24 CURTAIN, SPLASH, MK-2000 160972 1
Assy. Frame Part # 170818

44
MK-2000 ELECTRIC SAW EXPLODED VIEW & PARTS LIST
ITEM DESCRIPTION PART # QTY.
1BEARING, CUTTING HD PIV 140004 2
2BAR, ADJUSTMENT 150585 1
3PIN, SLOTTED SPRING, 3/8 X 1-3/4 151358 1
4WASHER, LOCK, SPLIT, 5/16 151747 4
5SCREW, 5/16-18 X 1-1/2 HEX HEAD MACHINE 152467 4
6BUSHING, FLANGE, 1/2X5/8X1 156441 2
7HOUSING, PIVOT SHAFT 157979 1
8HEAD, CUTTING (COMP) 160346 1
9CLAMP, CUTTING HEAD (COMP) 160397 2
6.67±.06
1
2
3
4
5
6
7
8
9
Motor Mount Part # 160966

45
MK-2000 ELECTRIC SAW EXPLODED VIEW & PARTS LIST
ITEM DESCRIPTION PART # QTY.
1FLANGE, OUTER 132290 1
2WASHER, FLAT, SAE, 3/8 150923 4
3WASHER, LOCK, SPLIT, 5/16 151747 4
4SCREW, HEX HD 1/2-20X1-1/4 152122 1
5SCREW, HEX, 5/16-18 X 2-1/4 153951 4
6BEARING, ARBOR HOUSING 154594 2
7CASTING, 2000/5000 ARBOR - COMP 154637 1
8SHAFT, BLADE 154639 1
9FLANGE, ARBOR, INNER 154640 1
1
4
6
7
8
9
Assy. Arbor Part # 154636

46
ITEM DESCRIPTION PART # QTY.
1WHEEL, CONVEYOR CART 133090 4
2STOP, BACK-CONVEYOR CART 134387 1
3SCREW, PAN HD PHIL #8 X 1 151047 2
4SCREW, THUMB 5/16-18 X 1- 1/2 151155 1
5NUT, SQUARE 5/16 - 18 151156 1
6SCREW, 1/4 -20 X 3/4 HEX HEAD MACHINE 152370 4
7NUT, HEX W/WSHR, 1/4 - 20 153941 4
8NUT, HEX W/WSHR 5/16 - 18 153942 4
9TABLE, D.C., COMP 158144 1
10 WOOD STRIP, TABLE INSERT 158283 1
11 CASTING, SQUARING ARM - COMP 231276 1
Assy Table Part # 133082
MK-2000 ELECTRIC SAW EXPLODED VIEW & PARTS LIST

47
Item Part # Description
1. 152792 Dressing Stick
2. 128777
MK-10
Wet Cutting
Refractory blade for brick
3. 128652
MK-30
Supreme Grade Blade
for Concrete Block
4. 128744
MK-50
Supreme Grade Blade
for Concrete Block
5. 159629
MK-414PB
Supreme Grade Penter
Blade for Hard Brick
6. 153331 Folding Saw Stand
MK-2000 ELECTRIC SAW ACCESSORIES

48
MK-2000 ELECTRIC SAW ORDERING & RETURN INSTRUCTIONS
ORDERING INFORMATION
You may order MK Diamond products through your local MK Diamond distributor or, you may order
direct from MK Diamond.
When ordering direct from MK Diamond, please have the following information ready before calling:
• The Model Number of the saw
• The Serial Number of the saw
• Where the saw was purchased and when
• The Part Number for the part(s) being ordered
• The Part Description for the part(s) being ordered
NOTE: There is a $25.00 minimum order when ordering direct from MK Diamond. A $6.00 charge will
be added to orders having a net billing value under $50.00. All purchases must be made using VISA,
MasterCard or American Express.
All parts may be ordered by calling toll free to – 800 421-5830 or 310 539-5221 and asking for
Customer Service. For technical questions, call – 800 474-5594.
RETURN MATERIALS POLICY
To expedite the service relative to the return of a product purchased through MK Diamond, please
observe the following:
NOTE: When returning all items, they must have been purchased within the previous twelve (12)
months.
• Have the Model Number of the saw
• Have the Serial Number of the saw
• Have the location of where the saw was purchased
• Have the date when the saw was purchased
• Contact Customer Service for approval to return the item(s)
• Obtain a Returned Goods Number (RGA) authorizing the return
• Follow the packaging instructions in the following section
• Ensure your item(s) are prepaid to the destination
For returned items, call toll free to – 800 421-5830 or 310 539-5221 and ask for Customer Service.
For technical questions, call – 800 474-5594 or 310 257-2845.
PACKAGING INSTRUCTIONS
• Remove the Cutting Head and Support Angle Assembly
• Dry the saw before shipping
• When packing, include the following: Saw, Diamond Blade, Blade Guard and Support Angle
Assembly and Adjustable Cutting Guide (Other Accessories are not required)
• Package the unit in its original container or one of comparable size (do not ship the unit partially
exposed)
• Ensure all parts are secured in the packaging to prevent moving
AUTHORIzED SERVICE CENTERS
For quicker repair time, you may contact MK Diamond Customer Service, toll free, at 800 421-5830
or 310 539-5221 for the Authorized Service Center closest too you or visit our web site at
www.mkdiamond.com. For technical questions, call – 800 474-5594.

49
MK-2000 ELECTRIC SAW CONTACT & WARRANTY
CONTACT
Please contact MK Diamond Products, Inc. Customer Service Department with any questions you
might have regarding distributors, parts or service.
Telephone: [phone]
Fax: [phone]
E-mail: [email protected]
Customer Service Hours: Monday through Friday, 6AM-4PM PST
MK Diamond Products, Inc.
1315 Storm Parkway
Torrance, CA 90501
© COPYRIGHT 2014, MK DIAMOND PRODUCTS, INC. ALL RIGHTS RESERVED.
The MK Diamond logo is a registered trademark of MK Diamond Products, Inc. and may not be used,
reproduced, or altered without written permission. All other trademarks are the property of their re-
spective owners and used with permission.
MK Diamond may have patents, patent applications, trade marks, copyrights of other intellectual
property right covering this product in this document.
This manual MUST accompany the equipment at all times. This manual is considered a permanent
part of the equipment and should remain with the unit if resold.
The information and specications included in this publication were in effect at the time of approval for
printing.
MK DIAMOND PRODUCTS, INC. will guarantee every machine they build, to be free from defects in
material and workmanship for (1) one year from date of purchase. The obligation of MK DIAMOND
PRODUCTS, INC. under this warranty is limited to the repair or replacement of any parts which,
under normal use, prove to be defective in material or workmanship. The parts involved or the unit
in question should be returned to MK DIAMOND PRODUCTS, INC. or to a point designated by us,
transportation prepaid.
This warranty does not obligate us to bear the cost of labor or transportation charges in connection
with replacement or repair of defective parts. Likewise, it shall NOT apply to any unit which has been
subjected to misuse, neglect or accident. This warranty does NOT apply to any machine which has
been repaired or altered outside our factory.
This warranty does NOT obligate MK DIAMOND PRODUCTS, INC., with respect to items not of our
manufacture, such as engines, motors, hydraulics, etc., which are subject to their own guarantees and
warranties.
We shall in no event be liable for consequential damages or contingent liabilities arising out of failure
of any equipment or parts to operate properly.
MK DIAMOND PRODUCTS, INC. LIMITED WARRANTY

50
NOTES

51
NOTES

MK-2000 SERIES
OWNER'S MANUAL, OPERATING
INSTRUCTIONS , & PARTS LIST
MK Diamond Products, Inc.
1315 Storm Parkway
Torrance, CA 90501
Toll-Free: [phone]
Phone: [phone]
Fax: [phone]
www.mkdiamond.com