MK Diamond Products MK-370EXP TILE SAW User manual

05.2015
MK-370EXP TILE SAW
OWNER'S MANUAL, PARTS LIST &
OPERATING INSTRUCTIONS
www.mkdiamond.com
Caution: Read all safety and operating instructions
before using this equipment. This owners manual MUST
accompany the equipment at all times.
Revision 307
Manual Part No. 160084

48
MK-370EXP SAW EXPLODED VIEW
TILE SAW ASSEMBLY
PART# 159943

49
MK-370EXP SAW PARTS LIST
ITEM. DESCRIPTION QTY. PART #
1WASHER, FLAT CUT 3/8 1 101360
2HOSE, WATER VINYL 1/2 X 3/8 TSAW (6.0') 1 132951
3CASTING, ACC RIP GUIDE - COMP 1 134551
4WRENCH, TILESAW, 15/16 - 18 X 1 2 134684
5SCREW, HEX HD, 5/16 - 18 X 1 2 151743
6WASHER, LOCK, SPLIT, 5/16 2 151747
7WASHER, FLAT, SAE, 5/16 2 151754
8SCREW, WING, 1/4 - 20 X 1/2 1 151888
9WASHER, 1/4 SAE FLAT 1 151915
10 WRENCH, TILESAW, 11/16 OPEN END 1 153450
11 CLAMP, HOSE 1/2 - 3/4 1 154394
12 PUMP, WATER, 115V 60HZ 1 155987-VP
13 KNOB, TRI PLASTIC, 1" 1 156770-01
14 CLIP, CORD 1/4" PUSH MOUNT 1 157259
15 MK-HDTCM WET 7 X 060 X 7/8 CONT 1 157913
16 KNOB, RUBBER, 1/4 -20 X 3/4" LONG 1 159428-1
17 PAN, WATER MK-370EXP/1080 1 160041
18 ASSY, CUTTING HEAD, 120V 1 160042
19 OWNERS MANUAL MK-370EXP 1 160084
20 GUARD, SPLASH 1 160310
21 SHEET, WARNING LABELS, TILE SAW 1 166012
22 ASSY, FRAME, 370EXP 1 167450
23 ASSY, TABLE, 370EXP 1 168025

50
MK-370EXP SAW EXPLODED VIEW
CUTTING HEAD ASSEMBLY
PART# 160042

51
MK-370EXP SAW PARTS LIST
ITEM. DESCRIPTION QTY. PART #
1FLANGE, OUTER, 2-3/8 2 135830
2NUT,HEX, 5/8 - 18 1 135848
3KNOB, DAVIES, 5/16 - 18 X 1 2 151681
4NUT, WING, NYLK, 5/16 - 18 1 151746
5WASHER, LOCK, SPLIT, 5/16 1 151747
6BOLT, HEX HD TAP, 5/16 - 18 X 2 - 1/2 1 151748
7NUT, HEX, 10-24 2 151749
8SCREW, FIL HD, SLT, #10 - 24 X 3/4 1 151750
9SCREW, FIL HD, SLT, #10 - 24 X 1 1 151751
10 SCREW, SHOULDER, 1/2 X 1/2 2 151753
11 WASHER, FLAT, SAE, 5/16 3 151754
12 NUT, HEX, 1/4 - 20 1 1515893
13 SCREW SHOULDER 5/16 X 5/8 1 152137
14 SCREW HEX HD, 1/4 - 20 X 3/4 1 152370
15 ELBOW, 1/8 MNPT X 1/4 BARB 90DEG 1 154652
16 CASTING, BLD GRD, 7 INCH BLADE (COMP) 1 154811
17 MTR, ELECT, 7.4 AMP 120V 1 156428-R
18 SCREW, FLAT HD 10 -32 X 5/8" 4 157554
19 CASTING, COMMON PART, CTTG HD-C 1 159937
20 CASTING, MTR MOUNT, COMMON-COMP 1 159941

52
TABLE ASSEMBLY
PART# 168025
MK-370EXP SAW PARTS LIST
FRAME ASSEMBLY
PART# 167450
1
2
3
4
5
6
2X 152227 BEARING, MULTILUBE
INCLUDED IN ITEM #4

53
FRAME ASSEMBLY
MK-370EXP SAW PARTS LIST
TABLE ASSEMBLY
ITEM. DESCRIPTION QTY. PART #
1 SCREW, 1/4 -20 X /34 FLAT HEAD PHILLIPS MACHINE 5 154657
2 CASTING, POST MOUNT, COMP 1 167448
3 WELDMENT, FRAME 1 167449
Item Description Part # Qty
1 SCREW, 5/16-18 X 3/4 HEX HEAD MACHINE 151369 2
2 WASHER, LOCK, SPLIT, 5/16 151747 2
3 WASHER, FLAT, SAE, 5/16 151754 2
4CASTING, TABLE, 370/770EXP-COMP 159939 1
5 BAR, GUIDE 3/4 DIA 159942 1
6 ASSEMBLY, ROLLER WHEEL 168023 1

54
ITEM NUMBER DESCRIPTION
1. 158434 MK-225, 7 x 5/8 Arbor
2. 139311 MK-215, 7 x 5/8 Arbor
3. 153293 MK-315, 7 x 5/8 Arbor
5. 134577-MK Dual 45° Flat Angle Guide
6. 134569-MK 90° Protractor
7. 152792 Dressing Stone
8. 160488 Side Table
MK-370EXP ACCESSORIES

55
NOTES

56
ORDERING INFORMATION
You may order MK Diamond products through your local MK Diamond distributor or, you may order
direct from MK Diamond.
When ordering direct from MK Diamond, please have the following information ready before calling:
• The Model Number of the saw
• The Serial Number of the saw
• Where the saw was purchased and when
• The Part Number for the part(s) being ordered
• The Part Description for the part(s) being ordered
NOTE: There is a $25.00 minimum order when ordering direct from MK Diamond. A $6.00 charge will
be added to orders having a net billing value under $50.00. All purchases must be made using VISA,
MasterCard or American Express.
All parts may be ordered by calling toll free to – 800 421-5830 or 310 539-5221 and asking for
Customer Service. For technical questions, call – 800 474-5594.
RETURN MATERIALS POLICY
To expedite the service relative to the return of a product purchased through MK Diamond, please
observe the following:
NOTE: When returning all items, they must have been purchased within the previous twelve (12)
months.
• Have the Model Number of the saw
• Have the Serial Number of the saw
• Have the location of where the saw was purchased
• Have the date when the saw was purchased
• Contact Customer Service for approval to return the item(s)
• Obtain a Returned Goods Number (RGA) authorizing the return
• Follow the packaging instructions in the following section
• Ensure your item(s) are prepaid to the destination
For returned items, call toll free to – 800 421-5830 or 310 539-5221 and ask for Customer Service.
For technical questions, call – 800 474-5594 or 310 257-2845.
PACKAGING INSTRUCTIONS
• Remove the Cutting Head and Support Angle Assembly
• Dry the saw before shipping
• When packing, include the following: Saw, Diamond Blade, Blade Guard and Support Angle
Assembly and Adjustable Cutting Guide (Other Accessories are not required)
• Package the unit in its original container or one of comparable size (do not ship the unit partially
exposed)
• Ensure all parts are secured in the packaging to prevent moving
AUTHORIzED SERVICE CENTERS
For quicker repair time, you may contact MK Diamond Customer Service, toll free, at 800 421-5830
or 310 539-5221 for the Authorized Service Center closest too you or visit our web site at
www.mkdiamond.com. For technical questions, call – 800 474-5594.
MK-370EXP ORDERING & RETURN INSTRUCTIONS