Aiden Highchair
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Phillips screwdriver required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
WARNING: AVOIDING PLACING THE CHAIR NEAR NAKED HEAT
SOURCES, SUCH AS ELECTRIC BAR FIRES, GAS FIRES, ETC. OR
WHERE A CHILD COULD GAIN ACCESS TO ANY OTHER KIND OF
HAZARD. AVOID PLACING HIGHCHAIR NEAR OTHER FURNITURE,
WALLS, HOT SURFACES OR LIQUIDS, WINDOW COVERING CORDS
AND ELECTRICAL CORDS.
WARNING: REGULARLY INSPECT THE HIGHCHAIR FOR
MAINTENANCE OF LOOSE SCREWS ETC.
WARNING: TO REDUCE THE RISK OF INJURY, POSITION THE HIGH
CHAIR AWAY FROM FURNITURE, WALLS, HOT SURFACES AND
LIQUIDS, WINDOW COVERING CORDS, AND ELECTRICAL CORDS
AND POSITION THE HIGH CHAIR AWAY FROM FURNITURE WHEN
THE CHAIR IS NOT BEING USED AT A TABLE WITH A TRAY REMOVED.
WARNING: DO NOT ALLOW YOUR CHILD TO CLIMB UNASSISTED
INTO, PLAY WITH OR HANG ONTO YOUR HIGHCHAIR. THIS IS NOT A
T O Y.
WARNING: BABY HIGHCHAIR PLASTIC BAGS CAN BE DANGEROUS.
TO AVOID DANGER OF SUFFOCATION, KEEP THIS BAG AWAY FROM
BABIES AND CHILDREN.
WARNING: DO NOT USE SPARE PARTS OTHER THAN THOSE
RECOMMENDED BY THE MANUFACTURER. ENSURE ALL USERS ARE
FAMILIAR WITH THE PRODUCTS OPERATION. IT SHOULD ALWAYS
OPEN AND FOLD EASY. IF IT DOES NOT, DO NOT FORCE THE
MECHANISM-STOP AND READ THE INSTRUCTIONS.
ENSURE THE CHILDREN ARE CLEAR OF ALL MOVING PARTS
BEFORE MAKING ANY ADJUSTMENTS. DO NOT MOVE OR ADJUST
THE HIGHCHAIR WITH YOUR CHILD INSIDE. ONLY USE IT ON A FLAT
STABLE SURFACE.
WARNING: BE AWARE OF THE RISK OF TILTING WHEN YOUR CHILD
CAN PUSH ITS FEET AGAINST THE TABLE OR ANY OTHER
STRUCTURE
Seat frame with liner
and harness
pre-assembled
FootrestX1
Basic tray X1
Up tray X1
T-bar X1
Front upper legs
A,B(with pre-drilled hole)
Rear upper legs C,D
Bottom legs A,B,C,D
ScrewsX2
