Mocka Hatcher Office Drawers User manual

Hatcher Office Drawers
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
bolt &
locking nut
x24
E
rail
x6
F
dowel
x8
G
brace
x6
B
large
screw
x12
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
C
medium
screw
x6
D
small
screw
x41
E1 E2
E3
E4
H
wheel
x2
I
wheel
x2
J
25mm screw
x 1
K
wall plug
x 1
L
safety strap
x 1
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child
attempts to climb up on the furniture or in the event of an
earthquake. Accordingly, we recommend that all furniture is
anchored to a wall. We supply a free safety wall anchor with all
furniture sold and we recommend these are used to prevent
your product tipping. The fixing device provided should fit most
wall types, but please note that different wall materials may
require different fixing devices from those supplied.

12
Hatcher Office Drawers
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
4
3
D
DDD
DDDD
D
DDD
E 1 E 3
E 3
E 3
E 1
E 1
A
3
4
2
A
A
A
F
F
AA
A
Attach 3 x rails (E1) and 3 x rails (E3) to panels [3] and [4] and secure
with 12 x screws (D). Tighten with a screwdriver.
Insert 4 x dowels (F) and 6 x bolts (A) into panel [2]. Attach panel [2] to
panels [3] and [4] and secure with 6 x locking nuts (A) Tighten with a
screwdriver.

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Hatcher Office Drawers
4
Slide panel [5] into position as shown. Insert 4 x dowels (F) and 6 x bolts (A) into panels [3] and [4]. Attach
panel [1] to panels [3] and [4] and secure with 6 x locking nuts (A).
Tighten with a screwdriver.
1
34
AAA
AAA
FF
5
A

5
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Hatcher Office Drawers
6
A
D
I
D
H
D
H
I2
D
Attach 2 x wheels (I) and 2 x wheels (H) to panel [2] and secure with 16
x screws (D). Tighten with a screwdriver.
Attach panels [7] and [8] to panel [9] and secure with 4 x screws (B).
Slide panel [10] into position as shown. Attach 4 x bolts (A) to panels
[7] and [8]. Attach panel [6] to assembled frame and secure with 4 x
locking nuts (A). Tighten with a screwdriver.
9
7
8
10
6
B
B
B
B
A
A
A

78 x2
Hatcher Office Drawers
5
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
D
D
78
D
D
E 2
E 4
12
13
11
10
14
B
B
A
B
B
A
Attach 1 x rail (E2) and 1 x rail (E4) to panels [7] and [8] and secure with
4 x screws (D). Tighten with a screwdriver.
Attach panels [12] and [13] to panel [14] and secure with 4 x screws
(B). Slide panel [10] into position as shown. Attach 4 x bolts (A) to
panels [12] and [13]. Attach panel [11] to assembled frame and secure
with 4 x locking nuts (A). Tighten with a screwdriver.
A

9 x2
6
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Hatcher Office Drawers
10
12
13
D
D
D
D
E 4
E 2
Attach 1 x rail (E2) and 1 x rail (E4) to panels [12] and [13] and secure
with 4 x screws (D). Tighten with a screwdriver.
Slide drawers into position as shown, ensuring alignment with rails.
6
11
11

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydire BC,QLD,4558
11
7
Assembly Instructions
Hatcher Office Drawers
12
C
G
5
Attach 6 x screws (G) to panel [5] and secure with 6 x screws (C).
Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill
to create a small hole lining up with the top of the 1 x safety strap (L).
Fasten to the wall using 1x wall anchor (K), 1x screw (J). Then attach
the safety strap with the Panel with 1x Screw (D). Ensure unit is
balanced and steady before use.
L
J
K
D
L

8
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Hatcher Office Drawers
13
You’re done, enjoy!