Modena Stroppia Series Owner's manual

User
Manual Book
Hand Shower
Stroppia Series
HS 6532, HS 4532, HS 6552
HS 6552F

2
Static Holder Type (HS 6532, HS 4532)
INSTALLATION INSTRUCTION
1. After specifying the installation place,
mark the place for drilling hole. Drill
the hole and then insert the plastic
wall anchor (Fischer) into it.
2. Place the rear holder cover;
tighten the screws; and install
the shower holder.
3. Connect the shower head with the
flexible hose; and put the rubber
washer onto the both ends of the
flexible hose to avoid the possible
leakage. Then, place the shower
head onto the shower holder.

3
Sliding Holder Type (HS 6552, HS 6552F)
1. After specifying the installation
place, mark the place for drilling
hole according to the picture
beside. Drill the hole and then
insert the plastic wall anchor into
it.
606mm
2. Place the sliding bar set into its
position. Then, tighten the screws
and close the bracket cover.
3. Connect the shower head with
the flexible hose. Put the rubber
washer onto both ends of the
flexible hose to avoid the
possible leakage. Then, place the
shower head onto the shower
holder.

12/20