MODI MODI-01 User manual

User's Guide
www.motointerphone.com
MODI
MODI

1:INTRODUCTION
Thank you for choosing the MODI-01. The MODI-01 is a Bluetooth
Multiplex Transmission radio adapter and mobile phone hands-free
gate way based on Bluetooth 4.0 and Bluetooth 3.0+EDR technology.
user can connect various two-way radios in the market with the
MODI-01 and connect wireless to a variety of Bluetooth
communication headsets. At the same time as a Bluetooth mobile
phone hands-free gateway, the MODI-01 lets users connect Bluetooth
headsets to mobile phones as well. With the MODI-01,users can use a
hand held two-way radio and a Bluetooth mobile phone
simultaneously with a single Bluetooth headset.
The MODI-01 has one AUX input port and one Microphone AUX output
port for wired connection of non Bluetooth devices such as GPS, radar
detector, laser detector, or non-Bluetooth mobile phone ,Along with
the MODI-01,users can talk by phone or by two-way radio at the same
time, listen to the radar detector alarm or GPS Voice Guidance . the
Microphone AUX output connection car sound ,use Bluetooth headset
Microphone shout speak out.
Features:
.Bluetooth hands-free adapter for two-way radios
. Bluetooth A2DP and hands-free gateway for Bluetooth mobile phone
.connect a two-way radio and a mobile phone simultaneously
.compatible with standard stereo or mono Bluetooth headsets
one AUX input and one AUX output for wired connection of non
Bluetooth devices; GPS ,Radar detector, laser detector ,non-
Bluetooth mobile phone and car sound
. Motorcycle handlebar mount and belt clip

.water resistant for use in inclement weather
.Firmware upgrade
. One-year limited warranty
Technical Specifications
.Bluetooth 3.0+EDR and Bluetooth 4.0
.supporting profiles: HSP ,HFP, A2DP,AGHSP
.Operating time 24 hours
.Standby time 12 days
.Battery charging time 3 hours
.lithium polymer battery
.Dimensions: 108mm X 50mm X28mm
.Weight: 85g
. CE, FCC, TELEC, NCC

.Main unit
.Power Button
.Bluetooth Headset Pairing Mode
.Mobile Phone Pairing Mode
.Reset Button
.Aux Out Button
.Open Audio Channel
.Transmit audio to Aux Out Port
.DC Power Charging & Firmware
2: PACKAGE CONTENTS
Upgrade Port
Out Port:
Output audio to external device
Aux Port:
GPS Navigation or Radar/Laser
Detect or other audio input
Source
.2.5mm Jack For Wired PTT
Button
MODI
Reset Key
Aux On Key
DC Charger
Ext.PTT Key
Power Key
Aux in Aux Out
Walki Talk Port

.USB Power & Data Cable
.3.5mm Audio Jack Cable
.Wired PTT Button Extension
.Belt Clip Kit
.Handlebar Mounting Kit
. charger

3:INSTALL THE MODI-01
3.1 Installing on the Handle Bar
3.2 Placing on the Belt/Pocket
1.Place the rubber on the back
of the main unit
2.Put the joint pad on top of
the rubber, and tighten the
screw.
3.Place the main unit on the
handle bar, wind the rubber
band, and hang it on the
hook.
1.Place the belt-clip on
the back of the main
unit, and tighten the
screw
2.Place the main unit on
the belt with belt-clip

4: POWERING ON/OFF AND CHARGING
To power on and off the adapter, you only need long press power
button.
4.1 Powering On
Press and hold power button about 2 seconds to turn the power on.
When the power is on, the blue LED light turns on.
4.2 Powering Off
Press and hold power button about 2 seconds to turn the power off.
The red LED light turns on about 6 seconds. The MODI-01 is now
powered off.
4.3 Charging
The red LED light flash while charging. It takes about 3 hours to be
completely charged. When it is completely charged, the red LED
always turns on.
4.4 Bike-powered Charger Kit
If the motorcycle has key-on power outlet, the MODI-01 will be
charged using the 12v cigarette charger type bike-powered kit.
4.5 Low Battery Warning
When the battery is running low, the red LED light will flash.

5: PAIRING THE MODE-01 WITH BLUETOOTH DEVICE
5.1 Bluetooth Headset Pairing
1.Turn on your Bluetooth headset and enter pairing mode, following
the Bluetooth headset manual.
2.While MODI-01 is off state, press and hold power button for about 6
seconds until the LED flashes red and blue alternatively.
3.When the pair is successful, the blue LED flashes slowly
5.2 Bluetooth Mobile Phone Pairing
1.While MODI-01 is off state, press and hold power button for about 8
seconds until the red LED is rapidly flashing. Search the Bluetooth
devices on your mobile phone. The MODI-01 will be listed on your
mobile phone.
2.Enter 0000 for PIN. (Some mobile phone may not ask for the PIN)
3.The MODI-01 will be paired as “headset”. This profile is normally
recommended for most mobile phones.
4.When pairing is done, the blue LED flashes slowly.

6. USING THE MODE-01
6.1: Using Two-way Radios
1.when MODI-01 is turned on and connected with a hand held two-way
radio, the radio from the two-way will be directly sent to your
Bluetooth headset. You can use Bluetooth headset as a hands-free
device for the two-way radio.
2.To out to AUX-OUT through MODI-01, press and hold the AUX-OUT
button until you finish talking.
6.2 Installing Wired PTT Button
1.Place the PTT Button on the motorcycle handlebar grip or any other
place where you can easily reach it.
2.Wind up the rubber band on the handlebar grip and hand it on the
hook.
6.3 Ports and Cables
The MODI-01 has one Main Port and two Aux port for wired
connecting with other device.
Below is a list of compatible cables and devices
.Main : 6-pin Hirose connector type two-way radio cable. *
.AUX_IN: 3.5mm 3-pole audio jack cable for GPS, radar detectors or
other.**

.AUX_OUT:3.5mm 3-pole audio jack cable for GPS or other*
**Not included in the package. Must be purchased separately
**Included in the package.
6.4 Using Mobile Phone
6.4.1 When the MODI-01 is paired with a Bluetooth headset and a
Bluetooth mobile phone, the Bluetooth headset will provide Hands-
free Profile for your mobile phone. The MODI-01 redirects mobile
phone calls and two-way radio communications to the Bluetooth
Headset simultaneously so that a Bluetooth headset could be used for
both the mobile phone and hand held two-way radio.
6.5 Audio Channel Open And Close.
Short press PTT button or AUX_OUT button , will open audio channel.
Blue LED quickly flash three times. Short press Bluetooth headset call
Button (Follow the Bluetooth headset manual) will close audio
channel.Blue led quickly flash two times.
6.6 Fault Reset
If the MODI-01 is not working properly or is in a faulty status for any
reason, you may reset by pushing the small reset button at top of the
MODI-01 main unit. By using a paper clip or a pencil tip. Press and hold
the reset button for 7 seconds.
6.7 Firmware Upgrade
The MODI-01 supports firmware upgrade function. Please visit MODI
Bluetooth web site at www.motointerphone.com to check the latest
software downloads.