Modine Manufacturing ECO EG User manual
www.modine.com
QUICK GUIDE
This document is a concise version of the model manual. This document is not meant to be a replacement of the manual.
To download the full manual please scan the QRcode below or locate the data label on the model and scan the QRcode.
Before removing the packaging,
handling, assembling, positioning,
commissioning of the machine
and before performing any work on
the model, download and carefully
read all the information in the manual.
If in doubt contact Modine.
Link to user manuals:
EG
Construction
and dimensional features
Refer to the drawing supplied with the model.
Example:
!"#$!!!
%&'()!!# ')!
' )
*'+)!, ')
-.
% ,"&/
##"%!"
&%
&
Wiring diagrams
General diagram
For other connections refer to the diagram printed on the inside of
the motor-fan box.
The thermo-contacts (TK) must be connected to the control circuit.
For further information refer to the diagrams supplied with the
model.
On standard EG models: on models supplied with the wiring in the junction box, remove the cover to make the connection.
On Junior, Jumbo and Giant models: on request, models can be supplied with wiring in a junction box or electrical cabinet.
www.modine.com
Modine CIS Italy S.r.l.
33050 Pocenia - Udine - Italy
Via Giulio Locatelli, 22
Tel. +39 0432.772.001
Fax +39 0432.779.594
www.modine.com
Link to user manuals:
https://www.modinecoolers.com/documents/
MN2634137_00
It is mandatory to use power cables with a minimum cross-section as indicated in Tab. 1. Please refer to the technical standards in
force in the country of installation, based also on the way the cables are laid and their length and type.
Nominal current
[A]
Power cable cross-section
[mm2]
11 1.5
15 2.5
20 4
26 6
36 10
48 16
64 25
80 35
95 50
150 95
170 120
Table 1
To minimise the risk of indirect contact, the electrical system can be earthed using the pin on the front.
On standard EG models please lift the front cover to locate the pin.
Notes
This manual suits for next models
1
Table of contents
Other Modine Manufacturing Industrial Equipment manuals
Popular Industrial Equipment manuals by other brands
MYERS
MYERS Pentair Water owner's manual
Lippert Components
Lippert Components Power Gear 82-L0356 owner's manual
Vantage Hearth
Vantage Hearth Hollister-Whitney GLV-40D2 instruction manual
SUHNER ABRASIVE
SUHNER ABRASIVE ROTOmax 4.2 TWIN Technical document
National Instruments
National Instruments VXIpc 770 Series user manual
ABB
ABB UniGear ZS1 instruction manual
